-
Not Currently Available: 883 m3 Trailing Suction Hopper Dredger
Built in 1965 in the UK and will be delivered under fresh Phoenix Class. The dredger has a dredging depth of 26m. Discharge is via bottom door. Cargo load time is 5000 m3/hr and has a hold capacity of 883 m3. The dredger has an overall length of 62.17m, breadth of 58.03m and depth of…
-
450 m3 Grab Bucket Loading Split Hopper Dredger
Built 1984 in France the 450 m3 split hopper dredger has a maximum dredging depth of 20 m (65.62-feet). The crane is a Liebherr Type B16/14-16VG with a 6.4 m3 bucket. It is powered by 2 Baudouin engines with total power of 1059 kw. Length is 52.5m, beam is 12.0m and has a draft of…
-
Not Available: Bucket Wheel Dredger and matching Hopper Barge Set
Available for charter or sale. The dredger has a dredging depth of 18m and can be extended to 24m. Bucket capacity is 775lt. The output rate is 750 m3/h. It is powered by 2 engines both full overhauled in 2021. The dredger has a length of 80.17m, a breadth of 14.42m and a depth of…
-
900 m3 Self Propelled Split Hopper Backhoe Dredger
In progress vessel. Requires 3 months to complete. The 900 m3 hopper has a hydraulic splitting mechanism. The cargo capacity is 1100 T. The vessel is 63.50 m in length and 11.36 m in breadth. The main engine is 2 Cummins- NTA 855 with 400 hp each. Vessel can be purchased with or without a…
-
2,300 m3 Crane Loading Split Hopper Dredger
Approx. 2300 m3 split hopper dredge. The dredge has a Liebherr HS895HD crane with 200 T lift capacity with arm of 41 m that can operate up to a max depth of 22 m (can be increased up to 50 m). The crane is fitted with 2 hydraulic grabs : one grab with a capacity…
-
1,800 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1983 in The Netherlands, this 1,800 m3 trailing suction hopper dredger has a dredging depth of 30 m and a suction pipe diameter of 60 mm. Powered by Wartsilla, SW260 engine with controlled pitch propeller and electric bow thruster. The dredger length is 89.97 m , width is 12.45 m and the loaded…
-
1,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1975 in the Netherlands, has a single rake cabin pump and a 4.7 T rake head. The rake pipe diameter is 700 mm. The dredge operates at a depth of 18 m. The dredge has a length of 83.85 m and a breadth of 13.00 m. Navigation area is offshore. Location: South China…
-
2,400 m3 Trailing Suction Hopper Dredger (TSHD)
Dredge has a maximum excavation depth of 30 m. Rake diameter is 700 mm with a single rake cabin pump suction method. Discharge is through bottom doors. There are rows of 16 piece bottom doors, each of which is driven by a hydraulic cylinder. The dredge is powered by 2 x 8Sw280 with 1850 kW…
-
2690 m3 Trailing Suction Hopper Dredger (TSHD)
Rebuilt in 2006 from a container vessel, this dredger has a load capacity of 2770T in 2690 m3 hopper. Load time is 45 minutes and discharge time is 15 minutes. Dredging depth is 30 m (98-ft). Pipe diameter is 650mm (25.6-inch). Submerged generator/pump rate of 6500 m3/h. The vessel is powered by a DEUTZRBV8M540 3200…
-
4700 m3 Trailing Suction Hopper Dredger w/Rainbowing
Built in 1986 by IHC Holland in The Netherlands, the Trailing Suction Hopper Dredger has a class notation of Russian Maritime Register of Shipping. The dredger has 2 x 810 kW IHC HOLLAND, electric dredge pumps each with a suction diameter of 700 mm (28-inch). The hopper capacity is 4700 m3 (6,147 yd3) and can…
-
4,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 2007 in China, this dredger has been working in Western India since 2007 with the same owner. The dredger has 22 section bottom dump Hopper with a hold capacity of 4500 m3 and a telescopic hydraulically operated weir level overflow system. The vessel has accommodations for 29 persons. Location: India …
-
1,000 m3 Trailing Suction Hopper Dredger w/ Side Casting
This 1,000 m3 Trailing Suction Hopper Dredger w/ Side casting was built in 1978 in Japan. It’s Classification Society / Notation is KM (Kerajaan Malaysia) * L3 1 AUT2 Dredger. Located in the Black Sea Dimensions and Characteristics Year Built: 1978 Classification Society: KM (Kerajaan Malaysia) * L3 1 AUT2 Dredger Length…
-
242 m3 Hopper Dredge
This single drag arm Hopper Dredge was built in 1977 and its Classification Society is CLASS “T” Spanish. The hopper dredger is equipped with swell compensation. Flag: IMO Located in Spain Principal Dimensions and Characteristics Year Built: 1977 Classification Society: CLASS “T” Spanish Length Over All: 34.00 m 112 feet Beam: 8.50 m…
-
SOLD: 7316 m3 Trailing Suction Hopper Dredge (TSHD)
Built in 2021 in China, the TSHD has 2 sets x 8000cbm inboard dredging pumps. Max dredging depth is 36 m. Hopper capacity is 7310cbm. Dredger main engines are 2 x DN8330ZC engines with 3310kw each with cruising speeds of 13.6k. Location: China General Built: 2021, China Flag: China Class: CSS Dimensions…
-
SOLD: 2690 m3 Trailing Suction Hopper Dredger (TSHD)
Launched in 2006 by Fujian Xiongying Shipyard. The dredger’s voyage area is Coastland & (A1 +A2). Loading time for the 2690 m3 hopper is 45 minutes. Discharge time is 15 minutes. Flowing for slop pump is 6500m3/h. Dredging depth underwater is 30 m (98.4-ft). The dredger has a length of 87.8 m (288-ft), a beam…
-
SOLD: 2,000 m3 Trailing Suction Hopper Dredger (TSHD) (3-Sisters)
This 2,000 m3 Trailing Suction Hopper Dredger (TSHD) was built in 1975 in Holland and its Classification Society is CSS (China Classification Society). Located in China Price is for each Dredger Principal Dimensions and Characteristics Year Built: 1975 Classification Society: CSS (China Classification Society) Length Over All (w/ ladder) approx.: 83.85…
-
SOLD: 3,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1985 in Belgium, the dredge has an Unrestricted navigation area, dredging over 15 miles from shore with H.S. 2.5 m; dredging within 15 miles from shore or within 20 miles from port. The max dredging depth is 36.5 m with a suction diameter of 900mm and a hopper capacity of 3500m3. Self-emptying channels…
-
SOLD: 8000 m3 Trailing Suction Hopper Dredger (TSHD)
The 8000 m3 hold capacity dredger has a dredging depth of 38 m. The dredge pumps are IHC HYTOP/HRMD172-36-85 x 2 sets, 10800 CBM. Method of discharge is rainbowing. GT/NS is 8031/4497. The overall length is 121 m, the breadth is 22 m and depth is 9 m. Draft is 4.182 m / 6.50 m.…
