-
Amphibious Combination Dredger / Twin Sisters Available
Classified for inland water use only. Equipment is suitable for use on land and in water. One vessel has operated for up to 400 working hours and the 2nd is new. The Vessel has a dredging depth of 6 m and a bucket size of 0.8 m3. Sand pump output diameter is 200 mm and…
-
15 m3 Duty Cycle Bucket Dredge and 4000 cu/yd Dump Scow
The dredge hull was built in 1999. The crane was built in the 1960’s and had a complete rebuild 2021 and 2022. The dredge is a conventional configuration, all welded steel construction, single skin, non self-propelled deck barge which is outfitted for dredging operations. The vessel is set up to be worked on (3) spuds,…
-
16-tonne Floating Crane and Grab Dredger
Floating Crane built in 1989 with major repair to engines in 2021. The barge was built in 1990. Registered as Germany (ZSUK)”Unionszeugnis” gültig bis 27.10.2025. The barge is 32.0 m in length, 14.30 in width and has a depth of 3.0 m. Overall height is 9.20 m.The cranes is a Weserhütte W320 Caterpillar 6TB00262 215kW…
-
8-inch Swinging Ladder Dredge Ellicott 360 “Dragon”
Built in 2012 with total hours on dredge of 7,000. Powered by a 375 hp John Deere Motor with 1,000 runtime hours. Dredge Pump is an 8-inch Metso pump (new) with suction diameter of 8-in and discharge diameter of 8-in. Cutter diameter id 31.5-in.. Pump capacity of up to 2,500 gallons “GPM” Location: State of…
-
4 m3 Grab Bucket Dredger w/ Liebherr HS 853 45-tonne Crane
Liebherr HS 853 HD excavator powered by V 8 cylinder diesel engine with a power rating of 400kW @ 1900 rpm. The crane has a max boom length of 29.0 m and min length of 11.0 m. Max capacity is 5.1 T @ 28.0 m reach. Bucket capacity is 4.0 m3. The barge is 28.0…
-
4.5 m3 Hitachi EX1900-6 Excavator Dredger
The Hitachi EX1900-6 has a dredging depth of 18.5 m, a bucket capacity of 4.5m3 and 810 kW power. The dredger has a 3 spud anchoring system with one of the spuds being a tilting spud. The dredge has a length of 36.5 m, breadth of 14 m and draught of 2.5 m. The dredge…
-
8 m3 Grab Bucket Dredger
646 Gross Ton dredger was built in 1979 in Japan. The crane is a SKK 808GDT-A with a dredging depth of 48m. Bucket size is light : 8m3 / Heavy : 5m3 and Rock breaking hammer of 25 Ton. Main engine is a MITSUBISHI S12A-MPTK with 910 HP x 1,900rpm. Location: South Korea …
-
13 m3 Grab Bucket Dredger
Built in Japan in 1982, the dredger has a SKK 16013 GDT -A crane with a dredging depth of 50m (164-ft). The bucket is a light : 13m3 (40 Ton) / Heavy : 8m3 (45 Ton). The Rock Breaking Hammer capacity is 40 Ton/50 Ton. Gross tonnage is 2,098. Location: South Korea General Year Built:…
-
8 m3 Grab Dredger
The 394 ton Grab Dredger was built in 1989 in Japan. The crane is a SKK-1508GDT-F with a dredging depth of 40m. Bucket size is light 8m3 (25 ton) and heavy 5m3 (30 ton). Lifting capacity is 40 ton, 400m3/hr. Engine power is 1310hp x 1800 rpm. The dredger has a length of 36.48m and…
-
18-inch/450 mm Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
-
0.5 m3 x 75 Bucket Ladder Dredger 800 m3/hr
Built in 1986 in Japan. This dredger has discharge system of Port/STBD Conveyor Systems (1.7mW x 15.6 mL) x 2 sets. Dredging depth is min -6.0 m – max -18.5 m and a width of 60.0 m. It has 2 spuds that are 1,100 mm diameter and 38.0 mL. GT is 1,939 and NT is…
-
8-inch Sand and Gravel Dredger
This 8-inch Sand and Gravel Dredger comes with approx. 300 feet of 8 inch pipe. Located in the state of Michigan, USA Principal Dimensions and Characteristics Main Engine Make/Model: Caterpillar / 3306 (diesel with a turbo) Power: 224 kW 300 hp Discharge & Pipe Discharge Diameter: 203.2 mm 8 inches …
