-
DSC Moray 8″ x 8″ Submerged Pump Swinging Ladder Dredger
The DSC Moray 8″ X 8″ Moray Class Dredge Is equipped with a Caterpillar diesel engine with inline direct marine-style transmission for dredge pump reduction. PLC operating system. Standard equipment, including power up/down winches for proper cable storage and a stern kicker spud or extending leg for controlled dredge positioning. Location: Florida General Information Principal…
-
CAT 336 Excavator for Mechanical and Hydraulic Dredging
Long reach CAT 336 excavator with clamshell and grapple for mechanical dredging, and a 8″ hydraulic pump for hydraulic dredging. Can dredge up to 45′ underwater. Sold with vessel linked below. Must be purchased with 160 ft. Crew Boat 240807-VO. With purchase of vessel this creates a turnkey dredging system or vessel only for $1,150,000. Price…
-
850 mm (34-inch) Cutter Suction Dredger
Built in 2011 in China, the dredger has a Classification of CCS Unrestricted Navigation. Total installed power is 13,671 KW. Inboard pumps (2) are IHC HRMD221-36-85 with shaft power of 3626 KW. Dredging depth is 6-28 m and suction and discharge diameters are both 850 mm. Discharge distance is 5-10 km. Cutter is a Bakker…
-
14 x 12-inch AMMCO Dredge
This 14 x 12-inch AMMCO Dredge was built in Nashville, the hull was rebuilt/refurbished in 2014. The vessel is a stock design hydraulic dredge built for commercial use at mine sites and protected waters. The dredge is in full operating condition, and is currently disassembled in a boatyard. Location: State of New Jersey, USA Principal…
-
8-inch Bucket Wheeler Cutter Dredger
Neumann built 8″ Bucket Wheel Cutter Suction Dredger, non – self-propelled. It has twin variable speed slurry pumps installed in series, often saving the need for installation of a booster pump into the discharge pipeline. The vessel was completely re-fitted in 2014 during which the whole power system, electrical system, positioning system and the hydraulic…
-
900 mm 10,800 m3 Bucket Wheel Dredger (CSD)
Built in 1996 in Korea. this 2,525 GT dredger has a dredging depth of 6.5m to 30m. Capacity is 10,800 m3/hr and has a suction diameter of 950mm and discharge of 900mm. It has 2 spuds each with a diameter of 1000mm, thickness of 60mm, length of 45m and weight of 78 Ton. Main engines…
-
18-inch Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
-
14-inch Submersible Pump Dredge, Electric Drive
Pontoon mounted submersible pump with cutter suction (HY400 with Power Pack) was built in 2016 in Italy. The dredge pump has a capacity of 1200 m3/h with a head of 42 m. Dredging depth is 25.0 m. Suction diameter is 1015 mm and discharge pipe diameter is 300 mm. Discharge distance is 1000 mm. The…
-
SOLD: 10-inch Discharge Cutter Suction Dredger (CSD)
The dredger cannot be sold to a company working in France. Built in 2008 and modified in 2014 with 2 additional pontoons for stability, due to the dredging pipe lengthening modified to increase the dredging depth from 8 to 10 m. For the stability, 2 small pontoons were added. Location: West Mediterranean …
