-
14 x 12-inch AMMCO Dredge
Dredge Info This 14 x 12-inch AMMCO Dredge was built in Nashville, the hull was rebuilt/refurbished in 2014. The vessel is a stock design hydraulic dredge built for commercial use at mine sites and protected waters. The dredge is in full operating condition, and is currently located in a boatyard. Location: New Jersey Dimensions and…
-
300-tonne Stiff Leg Derrick
The 300-tonne Stiff Leg Derrick was built in 2005 by the PT.ASL Shipyard in Indonesia. Located in Hong Kong Principal Dimensions and Characteristics Year Built: 2005 Length Over All: 52.67 m 173 feet Molded Beam: 20.73 m 68 feet Molded Depth: 3.05 m 10 feet GRT/NRT: 892/267 Generator Make/Model:…
-
5000-Tonne Semi-Submersible Barge
This 38 m (125-foot) Semi-Submersible Barge is ready for inspection and delivery. Lifting Capacity is 5000-Tonnes Located in Hong Kong Dimensions and Characteristics Length Over All: 38.0 m 125 feet Molded Beam: 33.0 m 108 feet Molded Depth: 13.0 m 43 feet Lifting Capacity 5000-tonnes 5512-Tons GRT/NRT: 1,677/503 The vessel…
-
Amphibious Combination Dredger / Twin Sisters Available
Classified for inland water use only. Equipment is suitable for use on land and in water. One vessel has operated for up to 400 working hours and the 2nd is new. The Vessel has a dredging depth of 6 m and a bucket size of 0.8 m3. Sand pump output diameter is 200 mm and…
-
2″ SDR 7 HDPE Pipe
Quantity Available: 50,000-feet most in 40-ft sticks. Unused stock. Location: State of Colorado, USA Pipe Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 2.37 inches 60.2-mm Pipe ID (Nominal) 1.66 inches 42.2-mm Wall Thickness (Nominal) 0.339 inches 8.6-mm Weight Per Foot 0.95 pounds 0.4 kg Standard Dimension Ratio (SDR) 7 Our pipe inventory changes…
-
10-inch SDR 17 Stub Ends with Flanges
Approximately 98 stub ends with flanges. Location: State of Oregon, USA USD 75.00 per end Our pipe inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225) 301-2873 or email us to discuss what you’re looking for.
-
Twin 290-man Accommodations Barges
Year built 2009. The barge is 76.16 m (250-ft) in length and has a beam of 17.76 m (58-ft). Maximum draft is 3.0 m (9.84-ft). It has a fresh water capacity of 170 m3, fuel oil capacity of 80 m3 and sewage waste capacity of 580 m3. Equipment include (2) 800 kW CAT generator, (2)…
-
35-tonne BP Twin Cycloidal Propulsion Towing Tug
Built in 1977. The hull is built of Ordinary Strength Steel with five water tight bulkheads. Continuous main deck from Poop deck until the accommodation. The Forecastle is raised one level. The accommodation is in the middle and below there are the cycloidal propellers. Powered by a Stork Wartsila 4tew SWD 9 FHD 240 engine…
-
203 mm (8″) Mud Cat 115D Cutter Suction Dredge
Dredge Overview Mud Cat 115D has max dredging depth of 15-ft with a 7-ft wide SolidsMaster cutter head with a 17-in diameter. Cutter torque is 12,000 in-lbs and average cutting speed is 8-10 fpm. The slurry pump has a discharge of 8-inches, a closed impeller solids passage of 3.6 inches and an open impeller solid…
-
18-foot Deep V HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft 9-in, beam of 7-ft 8-in and a transome height of 23-in. Sides are made from 12-in Round Tube with upper (21 ¾” Total). Hull, floor and bench material thickness is ½” HDPE. Transom and side material is ¾” HDPE. Hull carries a twelve-month warranty…
-
10-inch SDR 17 HDPE Pipe
Quantity Available: 13,000-feet in approximate 40-foot lengths. Location: State of New Jersey, USA USD 8.25 per foot Dimensions and Characteristics Material High Density Polyethylene Pipe OD (Nominal) 10.75-inches 273.05-mm Pipe ID (Nominal) 9.410-inches 239-mm Wall Thickness (Nominal) 0.632-inches 16.05-mm Weight Per Foot 8.76-pounds 4 kg Standard Dimension Ratio (SDR) 17 Our pipe inventory changes weekly.…
-
17-foot Modified V Hull HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft, beam of 7-ft 6-in, sides 23-in and a transom height of 20-in. Hull, floor and bench material thickness is 3/8” HDPE. Floor/Front platform material is ½” HDPE. Features: Transom material is 3/4″ HDPE, rear transom wells for battery and fuel tank, front platform with…
-
23-foot Flat Bottom HDPE Work Skiff
New Construction – the HDPE skiff is a length of 23-ft, beam of 8-ft 3-in, sides 24-in and a transom height of 25-in. Hull, floor and bench material thickness is 3/8” HDPE. Transom material is ¾” HDPE. Cabin and other accessory material are ¼” HDPE. Features recessed transom w/ storage, front platform/storage compartment and rear…
-
16-inch Hose, Flange x Flange, non floating (NEW)
The hoses are Trelleborg, 16-inches ID, pressure rating 15 bar, (225 psi). Electrically continuous. 8 pieces each with a length of 40-feet. Location: State of Texas, USA USD 6,500 each hose Our pipe inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225) 301-2873 or email…
-
10-inch Slurry Hose
Quantity Available – 132-feet. Hose is in very good condition. Used for only one specific job. Very low hours. Location: State of California, USA Dimensions and Characteristics Hose Inner Diameter: 254 mm 10-in Outer Diameter: 288 mm 11.3-in Thickness of Inner Layer: 8 mm 5/16-in Working Pressure: 150 PSI Standard ANSI 150 PSI Flange Specification…
-
12-inch DR 17 Dredge Pipe w/ Flanges & Backing Rings
12-inch DR 17 Dredge Pipe w/ Flanges & Backing Rings for sale. Quantity Available: – 7,000 feet. Pipe is in very good condition. It was purchased for a specific job, it was never used again. Very low hours and excellent condition. The pipe was in 300’ lengths with flanges on each end. It was cut…
-
1000 hp Twin Screw Anchor Boat
Built in 1973 in Japan. The anchor boat is powered by 2 Yanmar 6M-UT (4-valve) engines with 500 hp each and has 2 set x Screw Propeller. The length of the boat is 22.59 m (74.11-ft), breadth is 8.0 m (26.25-ft and has a depth of 2.5 m (8.2-ft). Location: West Mediterranean Sea …
-
6 m3 Grab Bucket Dredger w/ Mitsubishi S6N-MPTA Crane
6 m3 Grab Bucket Dredger was built in 1976. The dredge has a length of 33.62 m, a breadth of 15.0 m and depth of 2.50m. The crane is a SKK 570 GDX-F with a capacity of 100 tons. Boom length is 28.0 m. Dredging capacity is 570 m3/h. The main engine is a 145hp…
