-
584 mm (24-inch) Cutter Suction Dredger (CSD)
Dredge Overview Originally built in 1969 and rebuilt in 2017. The dredger has total power of 4,000 hp. The engine is a Diesel modelo 16-645E marca EMD with 2775 hp and cutter power of 400 hp. Max dredging depth is 16m (52.5-ft) and min depth of 1.5m (4.9-ft). Dredge pump is a HDM 80-28×24-C with…
-
NEW 76 HP, 25-foot Tug Boat/Dredge Tender w/ A-frame
Factory built in 2016 but never used. The vessel has 2 side pontoon that are bolt mounted on the side of the hull. The length of the vessel is 24-ft 10-in and width of 13-ft (including side pontoons). The XinHong / XHSJ20-374A-00 winch is hydraulic and has a capacity of 3000 lbs. It has a…
-
28.90 x 13.65 x 2.63 m Excavator Pontoon (Deck Barge)
The deck barge was built in 1976 and rebuilt in 2019. Comes with spud legs and lifting winches. Spuds (2) have a height of 14 m. Draft 0.65 m. Hydraulic vertical support legs built for the pontoon provides positioning depth of 12 meters. The total useful area of the pontoon is 394.5 m2. Location: Baltic…
-
2012 hp Single Screw Towing Tug
Built in 1983, in the Italy. The tug has a steel hull and is classed NSB Tug or AH 100AE. It is powered by a Wartsila NOHAB DIESEL with 2012 hp. Cruising speed is 10 knots. Length is 25.05 m, breadth is 24.36 m and depth is 4.0 m. Location: South Europe General Information Built:…
-
1650 hp Single Screw Towing Tug
Built in 1977, re-engined in 2000, the single screw tug is classed MCA Cat 2. The tug has a length of 25.28 m, breadth of 8.26 m and depth of 3.8 m. Bollard pull is 19 tonnes. Ballast capacity is 53 m3 The tug is powered by 1 x Caterpillar 35-1 @ 1800 RPM with…
-
Amphibious Combination Dredger / Twin Sisters Available
Classified for inland water use only. Equipment is suitable for use on land and in water. One vessel has operated for up to 400 working hours and the 2nd is new. The Vessel has a dredging depth of 6 m and a bucket size of 0.8 m3. Sand pump output diameter is 200 mm and…
-
IMS model 7012 12-in Horizontal Cutter Dredger
IMS model 7012 Horizontal Cutter Dredger built in 2014. Reported to be in good working condition. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge with a dry weight of 47,700 lbs (21,636 kg). Dredging depth is 30-ft using Starwheel Drive System and 32.8 using Cable Drive System. Cutterhead torque is 23,885 in.-lbs. (2,969…
-
25,000 m3 Sand Carrier / Conveyor Unloading Sand Ship
This ship is a self-priming and self-unloading sand ship propelled by a stern model, twin engines, twin propellers, twin rudders, and diesel engines; There are four deckhouses at the rear. The six cargo holds are arranged in the cargo area. This ship is a cargo ship that uses its own belt conveyor to unload granular…
-
50 HP Slurry Pump
Metso 8×6 slurry pump with drive and 50 hp motor. Location: State of Nebraska, USA
-
73.6 kW Utility Tug
Built in 1996 in the Netherlands, this tug has 1,000 hours of use. It has 73.6 kW @3000 RPM. It is 7340 mm in length and weights 5000 kg. Location: Portugal General Year Built/Location: 1996 / Netherlands Hours of Use: 1,000 h Dimensions and Characteristics Length Over All: 7.34 m 24.1-feet …
-
49.6 m x 19.5 m x 4.3 m Flat Top Barge, 1,800-tonne Dead Weight (for charter)
Available for charter. Built in 1977 in Italy the barge is non-self-propelled. Class is RINA International 20 nm Offshore. 49.6 m x 19.5 m x 4.3 m Flat Top Barge has a GT to 1080 tons. Free space for loading: complete – bollards under deck. Authorized RoRo embarkment: by ramp drivable capacity T90 – per…
-
550 m3 Bottom Dumping Hopper Barge
Barge Information Built in 1990 in Russia, the barge has a steel hull. It has a Class Society and Notation of Phoenix 3nm offshore. Hooper capacity is 550m3 (719 yd3). It is powered by 2 overhauled VOLVO PENTA TD 162 with propulsion power of 2 x 220 hp. Max speed is 9 knots and cruising…
-
For Charter – 31.2 m x 16.7 m x 2.4 m Jack-Up Barge
For Charter Only The Jack-Up barge has a deck load capacity of 570T – 3T/m2 and a maximum water depth of 28 m (92-ft). Spud lifting speed is 0.4 m/min. The barge was built in 1990 and has had several conversions since. Class Society and Notation is BV Self Elevating Coastal Waters. Location: Europe General…
-
12-inch Self-Propelled Auger Dredge (IMS 5012)
Dredge Info Built in 1999 with only 1,700 working hours. This auger dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such as canal, reservoir, and…
-
964 BHP Self-Propelled Crane Barge
Vessel especially suited for grab dredging and placing of rocks, blocks or tetrapod’s and similar placing. The Equilibrum crane has a depth of 20 m (65.6-feet) and a reach of 28.0 m (91-feet)The bucket has a capacity of 5.75m3. The vessel has a max. deck load of 4T/m2. Powered by 2 EM MOTORS GMBH K22R…
-
550 hp Multi-Purpose Work Boat For Sale and Charter
This 550 hp Multi-Purpose Work Boat was built in 2005 and it’s Classification Society and Notation is INSB (International Naval Surveys Bureau), Sailing area: Full European up to 20 miles from a safe haven. Flag: Cyprus Located in Northern Europe Principal Dimensions and Characteristics Year Built: 2005 Make/Model: Multicat Classification Society/Notation:…
-
880 hp Twin Screw Near Shore Tug and GP Work Boat
This listing is for a 880 hp Twin Screw Near Shore Tug and GP Work Boat that was built in the United Kingdom in 2004. She is a twinscrew motor tug, certificated under the MCA Workboat Code of Practice for operation up to 60 miles offshore. She is available for towage and survey works throughout…
-
406.4 mm (16″) Cutter Suction Dredger, DSC Model 750
Dredge Overview This listing is for a 16-inch Cutter Suction Dredger, DSC Model 750 that was built in 1993. Overall the dredge is in very good conditions, it has been used for only one project and the original owner from which it was purchased used it for a very short period of time on very…
