-
3700 hp 40 M Anchor Handling Tug
Vessel Info Brand New 3700 hp, 40 M anchor handling tug for sale. The vessel can be ready for delivery within 3 months after signed contract and deposit. Bollard Pull for this new AHT is 45 tons. See spec sheets for more details; Equipment, dimensions, and vessel detail sheet Layout, profile and design spec sheet…
-
Sold – 25.43m Fishing Autoliner
25.43m (83 ft.) fishing autoliner is now available for sale. It could be put under BV Class at an extra cost. Vessel was re-built in 2005: The vessel was shelter decked (aluminium),heeling correction tanks, sandblasted and hot galvanized in Poland. In 2015 it was lengthened (4,5 meters). Anti-rolling tank installedIn April 2022 the vessel will…
-
Crew Boat For Sale
Located on the West Coast of the United States. Built in 1968. Location: West Coast (USA) General Information Built: 1968 / UNITED STATES OF AMERICA Hull material: Aluminum Flag: UNITED STATES OF AMERICA Class Society and Notation USCG, Coastal Trade Dauntless USCG COI inspection scheduled for 2024 Classification USCG Certified, Subchapter T Route Coastwise Unrestricted…
-
60T BP Ocean Going Tug
Ocean going tug with 60T BP and a double winch, in perfect condition with very low running hours. The boat was built under ABS certification. During all its maintenance under the U.S. military ABS certificates have been maintained. At the time of sale, for reasons of confidentiality, ABS withdrew its certificate. The studies need to…
-
New Price – 160 ft. Crew Boat
Motivated seller! Can be purchased with CAT Excavator with Clamshell, Grapple, and Pump for a Turnkey Dredging System for $1,999,000 or vessel only for $1,150,000. Location: State of Florida M/V Aluminum Crew Boat ABS Certified good till 2027 Solas Equipped for Ocean Travel Uses: Offshore Cargo and Crew Supply, Dredging, Marine Survey Built 2002 by…
-
60-PAX, Aluminum Triple Screw Offshore Crew Boat
This listing is for a 60-PAX, Aluminum Triple Screw Offshore Crew Boat that was built in 1979. Location: Mexico Dimensions and Characteristics Year Built: 1979 Hull Material: Aluminum Length Over All: 33.52-m 110 feet Beam: 6.55-m 21.5 feet Height: 2.8-m 9.18 feet Draft: 1.79-m 5.87 feet GRT/NRT: 153…
-
5,600 hp Ocean Going Tug Boat with FI-FI
This 5,600 hp Ocean Going Tug Boat with FI-FI was built in 1970 and was rebuilt in 2001 in Norway and its Classification Society and Notation is PHRS (Phoenix Register of Shipping); Tug, Navigation: A1, A2, A3. SS and DD completed Nov. 2016 Flag: Lebanon Located in Eastern Mediterranean Seas Dimensions and Characteristics Year Built/Rebuilt: 1970/2001…
-
7,944 hp Anchor Handling Tug (AHTS)
This Tug was built in 2009 by Yuexin Shipbuilding Co., Ltd. in China. Its Classification Society/Notation is ABS (American Bureau of Shipping), +A1 (E) Offshore Support Vessel, Towing Service, FiFi 1, +AMS+DPS-1. Flag: Singapore Located in Nigeria For Long Term Charter OnlyRate USD $ 37,000 per day Principal Dimensions and Characteristics Year Built: …
-
SOLD: 1000 hp Single Screw Towing Tug
Built in 1966 in Germany, the 1000 hp tug has a static bollard pull of 14 ton at 100% rating. Main engines (2) are Deutz SBA 6M 528. The tug has one towing hook with remote release. Maximum speed is 11 knots and cruising speed is 8 knots. Submersible pumps (3 units) have a total…
-
SOLD: 330 Tonnes Offshore Supply and Support Vessel
This Offshore Supply and Support Vessel is classed to operate up to 200 miles offshore. The vessel has a load capacity of 330 long tons and 2 x Cummins KTA 38MO engines. All certificates are up to date. Reported to be in very good condition. Last dry dock Feb 2019. EEP Certified for 75 persons.…
-
SOLD: 2820 hp Twin Screw Ocean Tug
Built in 1980 in the United Kingdom, the Twin Screw Ocean Tug has 2 x Ruston 6RKCM engines for total power if 2820 hp. The tug’s bollard pull is approx. 42.5 tons measured in 2005. Available deck area is 40 m2 (47.8 yds2) with load capacity of 40 tons. The vessel has accommodations for 10…
-
SOLD: 450 hp General Purpose Single Screw Ocean Going Tug
Built in Spain in 1969 and rebuilt in 2014 this 450 bhp Single Screw Ocean Going Tug has a Class Society and Notation: Local Ship Inspectorate T Sea Going. Last SS and tail shaft survet was in 2018.Next annual survey will be in June 2020. ACCOMMODATION Total cabins/bunks 1 cabin x 2 men Seats for passengers 8 1 x toilet with shower, mess room, galley with fridge/A TOWING AND CARGO EQUIPMENT: Deck Crane…
-
SOLD: 3,200 bhp Twin Screw Ocean Going Towing Tug
The tug has accommodations for 15 persons and an endurance of 26 days. With 2 x Cummins KTA 50M2, the tug has combined 3,200 bhp. All navigation systems are in good condition. The latest use of this boat was 2.5 years ago. The tug is ready to go to work. GMDSS area – A1. SOLD…
-
SOLD: 4,800 hp Offshore Anchor Handling Supply Tug
This 4,800 hp Offshore Anchor Handling Supply Tug was built in France in 1979 and its Classification Society and Notation is BV (Bureau Veritas) Unrestricted Deep Sea Tug. It’s next Special Survey is due in July, 2018 and its next Annual Survey is due in October, 2016. Flag: Malta Located in East Mediterranean Principal…
-
SOLD: 6,000 hp Ocean Tug
This Tug was built in 1976 in Brememhaven, Germany and its Classification Society is BV (Bureau Veritas). The Class is presently suspended because the last Special Survey has not been done in about one year, but it can be reinstated by the buyer after passing the Special Survey at the buyers cost. Located in the…
-
Not Available: 1000 hp, 14 m, 12-PAX 28-knot Crew Boat
Built in 2012 in GBI, the crew boat has a class U.K. MCA COP 12+2 / 60 MILES. The boat is powered by 2 Cummins QSC 8.5 with combined power of 1000 hp. Propulsion is 2 x FPP and max speed is 28 knots. Length overall is 14.9 m, beam is 5.0 m and draft…
-
Not Available: 2,100 hp Single Screw Ocean Going Tug
Built in 1987 in Italy, this tug is recently out of drydock July 2020 with an IACS class (RINA). It is powered by a Wartsila F38A 1 x 1550KW – 840 RPM engine with controllable pitch propeller in Kort steering nozzle. Bollard Pull is 39 tons. Maximum speed is 13 knots and cruising speed is…
-
Not Available: 1,700 hp Twin Screw Offshore Supply Vessel (OSV)
Twin Diesel Caterpillar c32 engines with 1,700 hp with a deck area of 340 m2 (34.6 x 9.81 m), GT of 624 and NT of 187. Cruising speed is 9 knots and towing speed of 4-6 knots with a bollard pull of 17 tons.. The vessel has a Link Belt Modela HSP-8040 Hydraulic Telescope Crane…
