-
Floating Crane / Grab Dredge (Non propelled)
Non propelled floating crane / grab dredger for sale. Crane had major repair work done in 2021. Location: Germany Quick Overview Vessel Type: Vessel Type: Floating Crane / Dredger Registry: Germany (ZSUK) “Unionszeugnis” gültig bis 27.10.2025 Year of Build (pontoon): 1990 Year of Build (crane): 1989 Shipyard (Pontoon): Hermann Sürken GmbH & Co. KG, Papenburg…
-
Amphibious Combination Dredger / Twin Sisters Available
Classified for inland water use only. Equipment is suitable for use on land and in water. One vessel has operated for up to 400 working hours and the 2nd is new. The Vessel has a dredging depth of 6 m and a bucket size of 0.8 m3. Sand pump output diameter is 200 mm and…
-
Excavator Dredge Based on P-944 Excavator
Pontoon F 600 with Pontoon Excavator P 944. Excavator has 2 buckets – 5.6m3 and 2.1 Pontoon length is 22.0 m (72-ft), width of 7,48 m (24.5-ft) and max flotation depth of 1,10 m (26-inches). Spuds has a length of 8.5 m (28-ft) however there is a 2m bolt in section that extends the spud…
-
4.5 m3 Hitachi EX1900-6 Excavator Dredger
The Hitachi EX1900-6 has a dredging depth of 18.5 m, a bucket capacity of 4.5m3 and 810 kW power. The dredger has a 3 spud anchoring system with one of the spuds being a tilting spud. The dredge has a length of 36.5 m, breadth of 14 m and draught of 2.5 m. The dredge…
-
4 m3 Power Shovel Type Excavator Dredger
The dredger was built in 1977 in Japan. It’s classifications is Russian River Register (O-PR 2.0 (Ice 20) and has a navigation area of < 20 miles from a shore. Its dredging depth is 3-20m. Total power is 1530 kW. Gross tonnage is 1,099 and Deadweight is 400t. Location: Baltic Sea General Year Built: 1977…
-
6 m3 Grab Bucket Dredger w/ Mitsubishi S6N-MPTA Crane
6 m3 Grab Bucket Dredger was built in 1976. The dredge has a length of 33.62 m, a breadth of 15.0 m and depth of 2.50m. The crane is a SKK 570 GDX-F with a capacity of 100 tons. Boom length is 28.0 m. Dredging capacity is 570 m3/h. The main engine is a 145hp…
-
6 m3 Grab Bucket Dredger w/ Mitsubishi 8DC-61C Crane
6 m3 Grab Bucket Dredger was built in 1988. This grab bucket dredge has a length of 33.62 m, a breadth of 16.0 m and depth of 2.50 m. The crane is a P & H FD600 with a capacity of 85 tons. Boom length is 32.0 m. Dredging capacity is 480 m3/h. The main…
-
8 m3 Mitsubishi Clamshell Dredge With 25-tonne drop hammer
Dredge was built in 1988 in Japan and last went into docking for repair in 2019. The crane is a SKK 80 ton with a 38m boom length. Dredging depth (under water) is 50 m. The sand bucket has a capacity of 8m3 with a load of 20 tons. The heavy bucket has a capacity…
-
12 m3 Excavator Dredge Hitachi EX1900-6
Dredge was built in 2018 in Korea and is registered in Panama. The excavator is a 2014 Hitachi. The dredge has 3 spuds of which one is a tilting spud each with a lengths of 30 m, diameter of 1,300 mm and speed of 8~11 m / min. GT is 516 tonnes. Maximum dredging depth…
-
SOLD: 16-tonne Floating Crane and Grab Dredger
Floating Crane built in 1989 with major repair to engines in 2021. The barge was built in 1990. Registered as Germany (ZSUK)”Unionszeugnis” gültig bis 27.10.2025. The barge is 32.0 m in length, 14.30 in width and has a depth of 3.0 m. Overall height is 9.20 m. The cranes is a Weserhütte W320 Caterpillar 6TB00262…
-
SOLD: 4 m3 Grab Bucket Dredger w/ Liebherr HS 853 45-tonne Crane
Liebherr HS 853 HD excavator powered by V 8 cylinder diesel engine with a power rating of 400kW @ 1900 rpm. The crane has a max boom length of 29.0 m and min length of 11.0 m. Max capacity is 5.1 T @ 28.0 m reach. Bucket capacity is 4.0 m3. The barge is 28.0…
-
Not Available: 0.5 m3 x 75 Bucket Ladder Dredger 800 m3/hr
Built in 1986 in Japan. This dredger has discharge system of Port/STBD Conveyor Systems (1.7mW x 15.6 mL) x 2 sets. Dredging depth is min -6.0 m – max -18.5 m and a width of 60.0 m. It has 2 spuds that are 1,100 mm diameter and 38.0 mL. GT is 1,939 and NT is…
-
Not Available: 8 m3 Grab Dredger
The 394 ton Grab Dredger was built in 1989 in Japan. The crane is a SKK-1508GDT-F with a dredging depth of 40m. Bucket size is light 8m3 (25 ton) and heavy 5m3 (30 ton). Lifting capacity is 40 ton, 400m3/hr. Engine power is 1310hp x 1800 rpm. The dredger has a length of 36.48m and…
-
Not Available: 16 m3 Grab Dredger
This 758 GT Grab Dredger was built in 1979 in South Korea. It is classed KST. It has a SKK-13016GDT-A crane with lifting capacity of 100 Ton(60°) at 24.4m ~ 48.0m, 136 Ton(80°) at 12.7m ~ 25.30m. The max dredging depth is 50m with a dredging capacity of 290m3/hr. Bucket capacity is 16(Light, 45ton) /…
-
Not Available: 13 m3 Grab Bucket Dredger
Built in Japan in 1982, the dredger has a SKK 16013 GDT -A crane with a dredging depth of 50m (164-ft). The bucket is a light : 13m3 (40 Ton) / Heavy : 8m3 (45 Ton). The Rock Breaking Hammer capacity is 40 Ton/50 Ton. Gross tonnage is 2,098. Location: South Korea General Year Built:…
-
Not Available: 10 m3 Grab Dredger
Built in 1982 in Japan. The dredger has a SKK-1008GDT-A crane with a dredging depth of 40 m. Bucket capacity Light is 10m3 (25 Ton) and Heavy 6m3 (30 Ton) and two 35 Tom Hammer. The dredger has 2 23m spuds. The length is 41.31m, breadth is 16.0m and has a depth of 3.0m. The…
-
Not Available: 15 m3 Grab Dredger
770 GT Grab Dredger built in 1979 in Japan. It has a length of 49.94 m, breadth of 19.0m and depth of 3.5m. The spud is 38m. The SKK-16016 GDT-B crane has a24m boom and can dredge to a depth of 50m. Hoist speed is 65m/min. The bucket is 15m3 x 45 Ton (Light) and…
-
Not Available: 8 m3 Grab Bucket Dredger
646 Gross Ton dredger was built in 1979 in Japan. The crane is a SKK 808GDT-A with a dredging depth of 48m. Bucket size is light : 8m3 / Heavy : 5m3 and Rock breaking hammer of 25 Ton. Main engine is a MITSUBISHI S12A-MPTK with 910 HP x 1,900rpm. Location: South Korea General Year…
