Pumps & Dredge Components

  • 18-inch Floating Booster Pump

    18-inch Floating Booster Pump

    • 775,000 USD
    • 200113-CP

    This 18-inch (457 mm) Booster Pump is mounted on floating pontoons. The pontoons measure 10 m x 6 m. The booster has been used on one job and run around 1500 hours. It is in good working condition and well maintained. The slurry capacity is 3500 m3/hr and has a discharge distance of 2000 m.…

  • Damen 250 Submersible Pump

    Damen 250 Submersible Pump

    • 72,500 EUR
    • 190706-CP
    • Location: Latvia

    This Damen DOP250 Submersible Pump is a compact pump directly powered by a hydraulic motor, mounted in a protective casing. The robust casing can be fitted out with a large array of suction heads, which results in a versatile dredging tool fit for a broad range of tasks. Pumps are designed to be user friendly…

  • 300 mm (12-inch) Submersible Pump, Damen DOP 3025

    300 mm (12-inch) Submersible Pump, Damen DOP 3025

    • 143,000 USD
    • 190802-CP
    • Location: North America

    This Damen 3025 is a hydraulically driven, submersible dredge pump with wear resistant pump parts. Maximum working depth for the standard executed DOP pump is -40 meters. A protective casing, made of steel, is surrounding the dredge pump and drive. The hydraulic motors and gearbox are suitable for continuous operation under and above water level.…

  • 10-inch Ellicott 370 Pump w/ Reducer Complete

    10-inch Ellicott 370 Pump w/ Reducer Complete

    • 72,000 USD
    • 180519-CP

    This 10-inch Ellicott 370 Pump was built in 2009. It is a complete pump and transmission (bearing housing and shaft). The the impeller and shell have about 60% life remaining. The dry end has been refurbished, and is in good condition. The transmission has new bearings, seals and a cooler. Location: Georgia Principal Dimensions and…

  • 27 x 24 x 68-inch Booster Pump with twin Cat 399 power

    27 x 24 x 68-inch Booster Pump with twin Cat 399 power

    • 885,000 USD
    • 151052-CP

    This is a 27 x 24 x 68-inch Booster Pump with twin Cat 399 engines that are rebuilt, one only has 191 hours. The Ellicott pump made by Mobile Pulley is a complete new pump and has never been used. It is skid mounted and the skid breaks in half so the booster can be…

  • 6 x 8-inch Booster Pump

    6 x 8-inch Booster Pump

    • 39,000 USD
    • 151021-CP

    This is a 6 x 8-inch Booster Pump with a Detroit Inline 6 diesel engine. Located in the state of Louisiana, USA   Principal Dimensions and Characteristics   Type: Booster Pump   Make/Model: Furukawa Slurry / LFK004 pump   Discharge Diameter: 152.4 mm 6 inches   Suction Diameter: 203.2 mm 8 inches   Weight: 10,000…

  • SOLD: 14-inch GIW Pump Impeller

    SOLD: 14-inch GIW Pump Impeller

    • 7,225 EUR
    • 200114-CP
    • Location: Netherlands

    Brand new GIW Impeller 14×36 IN 3M 2C4.5 for a dredge pump. The rotation direction is clockwise from the shaft side. The impeller weights 526.17 kg (1160 lbs). Location: Netherlands

  • SOLD: 160 mm Dragflow HY85 160 HC Submersible Pump (2 Available)

    SOLD: 160 mm Dragflow HY85 160 HC Submersible Pump (2 Available)

    • 25,000 EUR
    • 200822-CP

    Built in 2018 at Dragflow in Italy. Hydraulic motor. Pump has been used for only 300 hours. Suitable for bentonite water, slurry water, sand-water, salt sand water, etc Can be purchased en-bloc with 200824-PF and 200823-PP Location: Netherlands General Information Built: 2018 / Italy Working Hours: 300 hr Principal Dimensions and Characteristics Weight: 885 kgs…

  • SOLD – 10 x 8-inch Booster Pump w/Mack Engine

    SOLD – 10 x 8-inch Booster Pump w/Mack Engine

    • 12,000 USD
    • 210100-CP

    This listing is for a Lightning XL pump with a Mack 6 cylinder engine. The impeller is worn out. Pump recently painted. Location: state of Texas, USA Principal Dimensions and Characteristics Pump Make/Model: Lightning XL Discharge Diameter: 203.2 mm 8 inches Suction Diameter: 254 mm 10 inches Engine Make / Model: Mack 6 cylinder All…

  • Sold: Metso J36 12″ x 12″ Pump

    Sold: Metso J36 12″ x 12″ Pump

    • 45,000 USD
    • 211009-CP

    Metso J36 12″ x 12″ Pump Location: State of Nebraska, USA

  • SOLD: 6-inch Booster Pump with 226 hp Perkins Engine NEW

    SOLD: 6-inch Booster Pump with 226 hp Perkins Engine NEW

    • 82,000 EUR
    • 150112-CP

    This is a 6-inch Booster Pump with 226 hp Perkins Engine NEW with only two (2) operating hours. Located in Europe   Principal Dimensions and Characteristics   Pump Engine:     Make/Model: Perkins / 1106-66TA, 2013     Power: 168 kW 226 hp   Pump:     Make/Model: Senwatec suction pump     Pump Performance up…

  • SOLD: 14-inch Cutterhead Module with Cutterhead and 65 hp drive

    SOLD: 14-inch Cutterhead Module with Cutterhead and 65 hp drive

    • 56,000 USD
    • 211007-CH
    • Location: Nebraska

    Dredge works 65 HP cutter drive with pump and end ladder. The cutterhead has a 14-inch suction. Location: State of Nebraska, USA

  • SOLD: 12-inch Booster Pump

    SOLD: 12-inch Booster Pump

    • 323,000 USD
    • 190902-CP

    This 12-inch (305) mm, 715 hp Booster Pump was built in 2002. The pump is skid mounted and has 1,500 LOW hours with oil samples. The booster is diesel powered and V-belt driven. Location: State of Illinois, USA Principal Dimensions and Characteristics Year Built: 2002 Pump: Model/Make: Metso/L40 Discharge Diameter: 305 mm 12 inches Suction…

  • Sold: Twin Disk MG 518 Marine Gear 2.47/1 reduction

    Sold: Twin Disk MG 518 Marine Gear 2.47/1 reduction

    • 28,000 USD
    • 211006-CH
    • Location: North America

    Twin Disc MG 518-1; 2.47 to 1 reduction; sn 3 x 3918; rated 750 hp. Has been inspected and is in very good condition. Location: State of Nebraska, USA