-
SOLD: 6-inch Booster Pump with 226 hp Perkins Engine NEW
This is a 6-inch Booster Pump with 226 hp Perkins Engine NEW with only two (2) operating hours. Located in Europe Principal Dimensions and Characteristics Pump Engine: Make/Model: Perkins / 1106-66TA, 2013 Power: 168 kW 226 hp Pump: Make/Model: Senwatec suction pump Pump Performance up…
-
SOLD: 2018 600 HP Water Transfer Pumps
Built in 2018, 4 water transfer pumps with John Deere 6135HFC90 engines and Cornell 8NHG19 pump ends. The 8NHG19 pump is designed with Cornell’s renowned quality and durability. It features a 8″ discharge, 10″ suction, and premium hydraulic efficiency. Available in All Iron or CD4MCu materials. Cornell’s patented Cycloseal® design is standard. Data sheets are…
-
Sold: Excavator Pump Attachment 10-inch Eddy Pumps
Non-clog design for high solids industrial pumping applications. Min flow of 1200 gal/min and a max flow of 5000 gal/min. Has a capacity of 300-350 yd3/hr. Only used on one job. Very low hours and in excellent condition. The attachment is currently set up for a Komatsu 400 excavator. Requires a separate Hydraulic Power Unit…
-
SOLD: 6-inch Dredge Pump, hydraulic driven.
Innovative Material Systems CDH100C dredge pump, Hours: 1,132 on meter, Serial: 1024, Cummins 4BT, Fuel type: Diesel, Inlet/discharge diameter: 6″, (2) pumps, Hydraulic driven, (7) suction pipes, (1) 10′ L, (3) 8′ L, (3) 3′ L, Trailer, 16′ L x 84″ W, Suspension: Spring, Axles: Tandem, Tire size: ST205/75R15, good condition. Location: State of Kansas,…
-
SOLD: 12-inch Booster Pump
This 12-inch (305) mm, 715 hp Booster Pump was built in 2002. The pump is skid mounted and has 1,500 LOW hours with oil samples. The booster is diesel powered and V-belt driven. Location: State of Illinois, USA Principal Dimensions and Characteristics Year Built: 2002 Pump: Model/Make: Metso/L40 Discharge Diameter: 305 mm 12 inches Suction…
-
SOLD: Impeller and Inlet Liner for Thomas 10 x 12-inch J30 Pump
This listing is for a brand new impeller and suction liner for a Thomas 10-12 series 30 dredge pump. Part numbers/description: Pump Impeller H30,LH3V30.0TD4.00-.333P,D Inlet Liner H#) Mark III Armor-LOK GPS80 Location: Canada
-
SOLD: 14-inch Cutterhead Module with Cutterhead and 65 hp drive
Dredge works 65 HP cutter drive with pump and end ladder. The cutterhead has a 14-inch suction. Location: State of Nebraska, USA
-
Not Available: 16-inch Maddox Booster Pump
16” Maddox booster pump powered by Detroit diesel 12v92T with a twin disc PTO driving a Falk gear box . Pump is a Maddox 16x16x43. Booster is being sold as is where is. Location: State of Florida, USA Our inventory changes weekly. If you don’t see what you’re looking for please give us a call…
-
Not Available: 18/16 Warman Dredge Pump
Rebuilt in 2022 including new housing and new back plate. Impeller 85%. Location: Netherlands
-
SOLD: 500 hp Dredge Cutterhead Module For 22-inch Dredge
48-inch Cutter Basket with 500hp hydraulic gearbox. Assembly came off a 22 inch dredge. Location: State of Florida, USA Dimensions and Characteristics Cutter Diameter: 1219 mm 48-inch Hydraulic Gearbox: 373 kW 500 hp Our inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225)…
-
Not Available: 300 mm (12-inch) Submersible Pump, Damen DOP 3025
This Damen 3025 is a hydraulically driven, submersible dredge pump with wear resistant pump parts. Maximum working depth for the standard executed DOP pump is -40 meters. A protective casing, made of steel, is surrounding the dredge pump and drive. The hydraulic motors and gearbox are suitable for continuous operation under and above water level.…
-
Not Available: 18-inch Floating Booster Pump
This 18-inch (457 mm) Booster Pump is mounted on floating pontoons. The pontoons measure 10 m x 6 m. The booster has been used on one job and run around 1500 hours. It is in good working condition and well maintained. The slurry capacity is 3500 m3/hr and has a discharge distance of 2000 m.…
-
Not Available: 18-inch Floating Booster Pump
This 18-inch (457 mm) Booster Pump is mounted on floating pontoons. The pontoons measure 10 m x 6 m. The booster has been used on one job and run around 1500 hours. It is in good working condition and well maintained. The slurry capacity is 3500 m3/hr and has a discharge distance of 2000 m.…
-
Not Available: 12-inch Submersible Pump with Agitators Dragflow HY 300B
Comes outfitted with a hydraulically driven mechanical agitators, 250 ft of 10 inch fixed HDPE pipe, includes hydraulic power unit and associated controls. Requires misc. riggings and shackles to operate. Location: State of Oregon, USA Dimensions and Characteristics Model: HY 300B (Serial # 2663) Weight: 3542.6…
-
Sold: Twin Disk MG 518 Marine Gear 2.47/1 reduction
Twin Disc MG 518-1; 2.47 to 1 reduction; sn 3 x 3918; rated 750 hp. Has been inspected and is in very good condition. Location: State of Nebraska, USA
-
Not Available: 10-inch Submersible Pump with Agitators Toyo DP-150B
Pump comes outfitted with a jet ring, water supply pump, 2 saddles and a control box, 50 ft of electrical cord and 250 ft of 10 inch fixed HDPE pipe. Location: State of Oregon, USA Dimensions and Characteristics Model: DP-150B-3D1 Outlet: 254 mm 10-in Capacity: 720 m3/h 942 yd3/h…
-
SOLD: Dragflow HY 400B Submersible Pump w/ Cutters
Built in 2014, worked for only one shift then project cancelled. Huge inventory of spare parts including impeller and housing. The pump has a capacity of 1020-1150 m3/h and motor power of 300-410 hp. The main body is spheroidal cast iron GS500 and main shaft is austempering NiCrMo4 Steel. The cutter is a Hydraulic excavator…
