-
60 inch Pipe Lay Barge with DP and Revolving Crane
Built in 1976 and fully rebuilt and upgraded in 2009. Capable of laying pipes up to 60″ in offshore waters. Deck area is 1500m2. The barge can accommodate up to 280 persons. The main crane is a Clyde DE52 230 + 30 + 15 with capacity up to 1000t (fixed) at a radius of 22m…
-
36 ft. x 12.5 ft. Work Spud Barges (2)
2 work barges. One is 36-inches in height and the other 42-inches. Both barges are 35-ft in length and 12.5-ft in width. Both barges also have 2 spuds. Both of these barges have recently been blasted, painted, re-decked where necessary new manhole were renewed as required. Price is for each barge.Location: State of Texas, USA…
-
1,000 m3 Non-Self-Propelled Split Hopper Barge
This listing is for a 1,000 m3 Non-Self-Propelled Split Hopper Barge that was built in Japan in 2001. Flag: Korea / KST, Coastal Location: Korea Dimensions and Characteristics Year Built: 2001 Length Over All: 48 m 158 feet Length: 46.10 m 151 feet Beam: 13 m 43 feet Depth: 4.10…
-
Sold – M33 Deck Barge With A-Frame
M33 Deck barge in good condition and ready to work. This barge is part of a package deal with the M36 deck barge linked below. 35′ x 12.6″ x 36″ A-Frame (not pictured) Package Deal; M36 deck barge with spuds M33 deck barge with A frame Location: Louisiana Our barge inventory changes weekly. If you…
-
Sold – 30′ Raked Bow Work Barge
30’x12’x3′ Work barge, built in 2022 by Barge Worx. Location: Louisiana 30x12x3 Raked Bow Barge with following features 1/4″ Plate, 2x2x1/4 framing on 24″ centers, 4 cleats, Flush water-tight manway, 2 coat exterior epoxy paint Dual engine brackets with underdeck rigging pipe and Aluminum console 8″ internal spudwells 6″ spuds 20ft long with hats and…
-
Sold – 17 m, 471 kW Transport Vessel/Landing Craft
Powered by 2 GUASCOR engines, the transport vessel/landing craft has total power of 471 kW (631 hp) at 1800 rpm. The vessel is 17 m in length and 4.2 m breadth. It was built in 1982 and has been reconditioned. The vessel is reported to has 200 hours of use. Location: Portugal General Year…
-
Not Available – 16-tonne Floating Crane and Grab Dredger
Floating Crane built in 1989 with major repair to engines in 2021. The barge was built in 1990. Registered as Germany (ZSUK)”Unionszeugnis” gültig bis 27.10.2025. The barge is 32.0 m in length, 14.30 in width and has a depth of 3.0 m. Overall height is 9.20 m.The cranes is a Weserhütte W320 Caterpillar 6TB00262 215kW…
-
Not Available – 4,000 m3 Bottom Dumping Hopper Barge
This 4,000 m3 Bottom Dumping Hopper Barge was built in January, 2001 in Japan. It’s Classification Society / Notation is KST (Korea Ship Safety Technology Authority), Navigation Area is Great Coastal. Its last S.S. was in October, 2013 and its last I. S. was passed in May, 2011. This barge can be used for both…
-
Sold – 29 m (95 ft) Split Hopper Barge
Barge Info 29 m (95 ft) Split Hopper Barge for sale. Latest dry dock was June 2024. In 2020, 40% of the steel plates from the hold where changed and thickness increased. Barge Information Year Built & Place: 2006 / Spain Class Society and Notation: Local 3T 200 NM Sea Going Flag: Spain Hull Material:…
-
Sold – 54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat
Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a…
-
SOLD: 400 m3 Self-Propelled Split Hopper Barge
Built in 1997 and completely renovated in 2019, and both engines were replaced by two new ones. The split hopper barge has a hold capacity of 400m3 (523 yd3). It is powered by 2 Diesel Volvo Penta engines with 630 hp. It has 2 Azimuthal Columns Aquamaster Rauma thrusters. The barge has a GT of…
-
SOLD: 7905 DWT Ballastable Barge for Charter
Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…
-
SOLD: 1,300 m3 Split Hopper Barge, Reinforced for Rock
Built in 2010, the barge hopper is 35mm thick and can be used for rock & stone. The main engine is 2 NINGDONG with 2 x 473 hp. Maximum speed is 11 knots. The barge length is 64.85 m, beam is 13.2 m and depth is 4.6 m. Location: Malaysia General Built: 2010 Class Society…
-
SOLD: 400m3 Split Hopper Barge
Built in 1983 in Germany, the hopper barge has a classification of Russian River Register (O-PR 2.0 (Ice 20)). The hopper has a capacity of 400m3 with a load of 850t. The barge is powered by 2 x 220 kW diesel engines. Loaded speed is 4 knots and empty speed is 10 knots. The barge…
-
SOLD: 1485 m3 Split Hopper Barge
This 2220 ton Split Hooper Barge was built in 1987 in Yugoslavia. Its Class Society is Phoenix Shipping, Flag Comoros. This Split Barge comes from a conversion project from dry cargo. Reconstruction in 2018 and last dry docked in January 2019. Accommodates five persons. Additional Information Summer Load Draft (extreme) 4,169 metres Displacement at Load…
-
SOLD: 130′ x 50′ x 12′ Spud Barge, not documented
The vessel is of all welded steel construction with a raked bow, square stern and cambered deck with a concrete pad down the center. There are six (6) compartments: (2 rakes and 4 main body compartments) and four (4) spud wells. All compartments sighted are separated by transverse and longitudinal watertight bulkheads. There are 3…
-
SOLD: 160-tonne Bottom Dumping Self-Propelled Hopper Barge
This Barge was built in 1963 at the Ulmer Schiffs-und Bootswerft, HaBmersheim Shipyard. This barge is in good functioning condition, the owner installed larger tanks of 728 liters in 2006. Located in Germany “As Is, Where Is” Principal Dimensions and Characteristics Length Over All: 28.00 m 92 feet Width: 5.20 m 17 feet…
-
Sold – Loader Barge with Barko Crane
Loader barge with 1987 Barko 160A TRK Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 2022 Suzuki 150hp In-line 4 Stroke Outboard Ballast Tanks: 2 Pontoons: with Hydraulic Spud Wells and Spuds Crane Information Model: 1987 Barko 160A TRK Crane Orange Peel Grapple Rotex Turntable Reach: 27′ Engine: GM 353 Our inventory changes weekly. If…
