-
60T BP Ocean Going Tug
Ocean going tug with 60T BP and a double winch, in perfect condition with very low running hours. The boat was built under ABS certification. During all its maintenance under the U.S. military ABS certificates have been maintained. At the time of sale, for reasons of confidentiality, ABS withdrew its certificate. The studies need to…
-
NEW 76 HP, 25-foot Tug Boat/Dredge Tender w/ A-frame
Factory built in 2016 but never used. The vessel has 2 side pontoon that are bolt mounted on the side of the hull. The length of the vessel is 24-ft 10-in and width of 13-ft (including side pontoons). The XinHong / XHSJ20-374A-00 winch is hydraulic and has a capacity of 3000 lbs. It has a…
-
2012 hp Single Screw Towing Tug
Built in 1983, in the Italy. The tug has a steel hull and is classed NSB Tug or AH 100AE. It is powered by a Wartsila NOHAB DIESEL with 2012 hp. Cruising speed is 10 knots. Length is 25.05 m, breadth is 24.36 m and depth is 4.0 m. Location: South Europe General Information Built:…
-
1650 hp Single Screw Towing Tug
Built in 1977, re-engined in 2000, the single screw tug is classed MCA Cat 2. The tug has a length of 25.28 m, breadth of 8.26 m and depth of 3.8 m. Bollard pull is 19 tonnes. Ballast capacity is 53 m3 The tug is powered by 1 x Caterpillar 35-1 @ 1800 RPM with…
-
73.6 kW Utility Tug
Built in 1996 in the Netherlands, this tug has 1,000 hours of use. It has 73.6 kW @3000 RPM. It is 7340 mm in length and weights 5000 kg. Location: Portugal General Year Built/Location: 1996 / Netherlands Hours of Use: 1,000 h Dimensions and Characteristics Length Over All: 7.34 m 24.1-feet …
-
880 hp Twin Screw Near Shore Tug and GP Work Boat
This listing is for a 880 hp Twin Screw Near Shore Tug and GP Work Boat that was built in the United Kingdom in 2004. She is a twinscrew motor tug, certificated under the MCA Workboat Code of Practice for operation up to 60 miles offshore. She is available for towage and survey works throughout…
-
550 hp Multi-Purpose Work Boat For Sale and Charter
This 550 hp Multi-Purpose Work Boat was built in 2005 and it’s Classification Society and Notation is INSB (International Naval Surveys Bureau), Sailing area: Full European up to 20 miles from a safe haven. Flag: Cyprus Located in Northern Europe Principal Dimensions and Characteristics Year Built: 2005 Make/Model: Multicat Classification Society/Notation:…
-
35-tonne BP Twin Cycloidal Propulsion Towing Tug
Built in 1977. The hull is built of Ordinary Strength Steel with five water tight bulkheads. Continuous main deck from Poop deck until the accommodation. The Forecastle is raised one level. The accommodation is in the middle and below there are the cycloidal propellers. Powered by a Stork Wartsila 4tew SWD 9 FHD 240 engine…
-
18-foot Deep V HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft 9-in, beam of 7-ft 8-in and a transome height of 23-in. Sides are made from 12-in Round Tube with upper (21 ¾” Total). Hull, floor and bench material thickness is ½” HDPE. Transom and side material is ¾” HDPE. Hull carries a twelve-month warranty…
-
17-foot Modified V Hull HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft, beam of 7-ft 6-in, sides 23-in and a transom height of 20-in. Hull, floor and bench material thickness is 3/8” HDPE. Floor/Front platform material is ½” HDPE. Features: Transom material is 3/4″ HDPE, rear transom wells for battery and fuel tank, front platform with…
-
23-foot Flat Bottom HDPE Work Skiff
New Construction – the HDPE skiff is a length of 23-ft, beam of 8-ft 3-in, sides 24-in and a transom height of 25-in. Hull, floor and bench material thickness is 3/8” HDPE. Transom material is ¾” HDPE. Cabin and other accessory material are ¼” HDPE. Features recessed transom w/ storage, front platform/storage compartment and rear…
-
1000 hp Twin Screw Anchor Boat
Built in 1973 in Japan. The anchor boat is powered by 2 Yanmar 6M-UT (4-valve) engines with 500 hp each and has 2 set x Screw Propeller. The length of the boat is 22.59 m (74.11-ft), breadth is 8.0 m (26.25-ft and has a depth of 2.5 m (8.2-ft). Location: West Mediterranean Sea …
-
41-foot Aluminum High Speed Work Boat
US Coast Guard UTB Vessel built in 1975, the Huron Explorer is 41-ft in length, has a beam of 14-ft and draft of 4-ft. The boat is powered by 2 Cummins engines with 320hp. The boat has an aluminum hull with new bottom paint. SOLD Location: state of Florida, USA General Built Year: 1975 Hull:…
-
26.6 m Survey and Salvage Boat
Class is currently MCA Cat 2 60 nm Offshore but could be changed to Cat1, up to 150 nm offshore. It is equipped with bow thrusters. It has a reverse osmosis plant, full catering facilities and a full compliment of electronics equipment including Inmarsat. On deck it has a HIAB, survey winch A-Frame and diving…
-
1360 hp Crew Boat Wind Farm Vessel
Built in 2012 and refitted in 2017, this Crew Boat / Wind Farm Vessel has 2 Caterpillar engines with total power of 1360 hp. It’s maximum speed is 25 knots and cruising speed is 22 knots. It has seating for 3 crew members and 12 passengers. It’s Class Society and Notation is MCA Cat2 –…
-
38-foot, 250 hp Crew Boat (2-Sisters Available)
Built in 1972 in the USA, the crew boat has 2 x Detroit diesel 6-71N with a total of 250 hp and a 200 gallon diesel tank. Estimated range is 16 Hrs at max RPM. The flat main deck is part inserted with a wood supported open space area for carriage of stores or equipment.…
-
150 tonne Revolving Crane Vessel w/ Mooring and Dive Support
Vessel in Lay up condition under regular maintenance program. It can be used purely as a crane ship or as a dive support vessel or used in hook, maintenance and installation works. Heavy Lift Crane Vessel 150t (47.5 x 17m) – present rigged for 120t and 34.5m Boom – 6* point mooring – 3* Diver…
-
860 bhp Twin Screw Work Boat
Currently laid up ashore under suspended class arrangement. Reported to be fully operational but needs class and code surveys to be able to operate when required. Special survey is due 12th April 2021. Rebuilt and re-engined 2010, UK. Engine hours are approximations, due to her not having latest hours entered, as crew only sailed her…
