-
Trailing Suction Hopper Dredger
Trailing Suction Hopper dredge with 974 m3 in hopper. Built in 1981 in France, repowered in 2008. It has a maximum dredging depth of 16 m (52.49 ft). Length of 62.0 m, beam of 10.5 m, a depth of 3.5 m. Suction pipe diameter of 600mm with side discharge. It is powered by 2 Cummings…
-
1,535 m3 Trailing Suction Hopper Dredger (TSHD)
The Dredge was originally built in 1956 and was built by IHC Holland Sliedrecht – Netherlands and was refurbished in 2001. The vessel is loaded by a single drag head, and discharged by bottom dumping doors. Not equipped for shore pump out. Currently Committed until September 2018. Located in Pakistan Also for Charter Dimensions and…
-
850 mm (34-inch) Cutter Suction Dredger
Built in 2011 in China, the dredger has a Classification of CCS Unrestricted Navigation. Total installed power is 13,671 KW. Inboard pumps (2) are IHC HRMD221-36-85 with shaft power of 3626 KW. Dredging depth is 6-28 m and suction and discharge diameters are both 850 mm. Discharge distance is 5-10 km. Cutter is a Bakker…
-
SOLD: 2690 m3 Trailing Suction Hopper Dredger (TSHD)
Launched in 2006 by Fujian Xiongying Shipyard. The dredger’s voyage area is Coastland & (A1 +A2). Loading time for the 2690 m3 hopper is 45 minutes. Discharge time is 15 minutes. Flowing for slop pump is 6500m3/h. Dredging depth underwater is 30 m (98.4-ft). The dredger has a length of 87.8 m (288-ft), a beam…
-
SOLD: 3,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1985 in Belgium, the dredge has an Unrestricted navigation area, dredging over 15 miles from shore with H.S. 2.5 m; dredging within 15 miles from shore or within 20 miles from port. The max dredging depth is 36.5 m with a suction diameter of 900mm and a hopper capacity of 3500m3. Self-emptying channels…
-
Not Available: 4700 m3 Trailing Suction Hopper Dredger w/Rainbowing
Built in 1986 by IHC Holland in The Netherlands, the Trailing Suction Hopper Dredger has a class notation of Russian Maritime Register of Shipping. The dredger has 2 x 810 kW IHC HOLLAND, electric dredge pumps each with a suction diameter of 700 mm (28-inch). The hopper capacity is 4700 m3 (6,147 yd3) and can…
-
Not Available: 2690 m3 Trailing Suction Hopper Dredger (TSHD)
Rebuilt in 2006 from a container vessel, this dredger has a load capacity of 2770T in 2690 m3 hopper. Load time is 45 minutes and discharge time is 15 minutes. Dredging depth is 30 m (98-ft). Pipe diameter is 650mm (25.6-inch). Submerged generator/pump rate of 6500 m3/h. The vessel is powered by a DEUTZRBV8M540 3200…
-
Not Available: 1,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1975 in the Netherlands, has a single rake cabin pump and a 4.7 T rake head. The rake pipe diameter is 700 mm. The dredge operates at a depth of 18 m. The dredge has a length of 83.85 m and a breadth of 13.00 m. Navigation area is offshore. Location: South China…
-
Not Available: 2,400 m3 Trailing Suction Hopper Dredger (TSHD)
Dredge has a maximum excavation depth of 30 m. Rake diameter is 700 mm with a single rake cabin pump suction method. Discharge is through bottom doors. There are rows of 16 piece bottom doors, each of which is driven by a hydraulic cylinder. The dredge is powered by 2 x 8Sw280 with 1850 kW…
