-
3,600-tonne Lifting Jack Up Barge w/ 21 Pax Accommodations
48 x 28 x 4.5 m barge with 60 m legs. The jacking system is a SAMBO C.M.C. Lifting weight is 3600T and holding weight is 4,800T. Jacking speed up and down is 40 m/hr. The barge can operate in a depth of 40 m and wave height of 2.5 m. It has accommodations for…
-
60-inch Pipe Lay Barge w/ DP and 1000-tonne Revolving Crane
Built in 1976 and fully rebuilt and upgraded in 2009. Capable of laying pipes up to 60″ in offshore waters. Deck area is 1500m2. The barge can accommodate up to 280 persons. The main crane is a Clyde DE52 230 + 30 + 15 with capacity up to 1000t (fixed) at a radius of 22m…
-
22-inch Cutter Suction Dredger (CSD) IHC Beaver 2300
The IHC Beaver 2300 has a suction diameter of 24-inches (607mm), a discharge diameter of 22-inches (559 mm) and a dredge pump capacity of 2600 m3/h. It is powered by a CAT 3516. Auxiliary powered by CAT 3412 & D398. Built in 1970. It has a length of 28m, a breadth of 10 m and…
-
2,800 bhp Twin Screw Ocean Going Towing Tug
This 2,800 bhp, 29 ton Twin Screw Ocean Going Towing Tug has 2 x Mitsubishi S12R-MPTK. The tug travels at an economical speed of 10 knots and a maximum speed of 12 knots. Endurance is approximately 35 days and the tug has accommodates 17 persons. All navigation systems are in good condition. The latest use…
-
1,500-tonne Floating Sheer Leg Crane
This 1,500-tonne Floating Sheer Leg Crane was built in October, 1971 at the Hakodate Dock Co., Ltd in Japan. The barge was docked in 2011 and is not in operation, the hull is in good condition, the hoisting gear system needs to be refurbished and it was last certified 20 years ago with GL (Germanischer…
-
SOLD: 36-inch Cutter Suction Dredger for Charter, South America
This listing is for a 36-inch Cutter Suction Dredger for Charter in South America. Location: Venezuela Principal Dimensions and Characteristics Length Over All 73 m 240-feet Beam: 14.7 m 48-feet Depth: 3.76 m 12-feet Draft: 1.6 m 5.3-feet Lightship: 1,000 tonnes Dredging Capacities Max. Dredging Depth: 18 m 59-feet Nominal Production: 2,200 m3/hr 2,878 m2/hr…
-
SOLD: 3,200 bhp Twin Screw Ocean Going Towing Tug
The tug has accommodations for 15 persons and an endurance of 26 days. With 2 x Cummins KTA 50M2, the tug has combined 3,200 bhp. All navigation systems are in good condition. The latest use of this boat was 2.5 years ago. The tug is ready to go to work. GMDSS area – A1. SOLD…
-
SOLD: 3,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1985 in Belgium, the dredge has an Unrestricted navigation area, dredging over 15 miles from shore with H.S. 2.5 m; dredging within 15 miles from shore or within 20 miles from port. The max dredging depth is 36.5 m with a suction diameter of 900mm and a hopper capacity of 3500m3. Self-emptying channels…
-
Not Available: 900 m3 Self-Propelled Split Hopper Barge
This 900 m3 Self-Propelled Split Hopper Barge was built in 2014 and its Classification Society is Bureau Colombo. Flag: Brazil Located in Brazil Also available for Charter Dimensions and Characteristics Year Built: 2014 Classification Society: Bureau Colombo Length Over All: 61.01 m 200 feet Beam: 9.50 m 31 feet Depth:…
-
Not Available: 350-tonne Jack Up Barge for Pile Driving or Rock Drilling
This jack up barge is constructed in a “U” shape, so that it is open along the center for most of its length. The open end of the “U” is tied together by the superstructure. A 50-tonne electric crane is positioned over the open area, and travels the length of the barge on rails. The…
