-
Updated – 406 mm (16-inch) Non Propelled Cutter Suction Dredger (CSD)
Built in 1998 in France is a non-propelled cutter suction dredger. The dredge pump is a Caterpillar 3508 with 630kw @1800rpm. It has a max drilling depth of 12m and a maximum flow rate for water of 2880m3/hr. The cutter diameter is 1350mm. The deck crane has a capacity of 1.35T and a length of…
-
750 mm / 30-inch NEW Surplus Rubber Pipe
New made in 2022 in Europe. Designed for sand gravel application. Include steel flange and bolts/nuts. 4 pieces each 2000 mm. Free delivery (for all 4 pcs) to any Europe port FOB (2 weeks). Location: Ukraine USD 4,705 per piece Principal Dimensions and Characteristics Length (4 pieces) 2000 mm 6.56-ft DN 750 mm 30-in Working…
-
Amphibious Combination Dredger / Twin Sisters Available
Classified for inland water use only. Equipment is suitable for use on land and in water. One vessel has operated for up to 400 working hours and the 2nd is new. The Vessel has a dredging depth of 6 m and a bucket size of 0.8 m3. Sand pump output diameter is 200 mm and…
-
18/16 Warman Dredge Pump
Rebuilt in 2022 including new housing and new back plate. Impeller 85%. Location: Netherlands
-
57.8 m Low Air Draft Ro-Ro Barge
Originally built for shipping airplane wings for Airbus in Wales. The low air draft and shallow draft makes it perfect for passing under low bridges and canals in cities. It has a low level cargo deck with 300 tons capacity, lift system to lower cargo pallet legs in to the hull for low air draft,…
-
1,200 hp Single Screw Near Shore Towing Tug
Built in 1965 in Sweden. Class Society and Notation is Local Swedish Class Coastal Trade. Powered by 1 x Alpha Seffle 498 VO with total power of 1200 hp. Overall length is 24.60 m, breadth of 7.53 m, depth of 4.3 m and draft of 3.8 m. Accommodation for 5, 1 X 2 persons cabin…
-
710 hp, 17m Multicat
Built in 1991 and rebuilt in 2009, the Multicat was in dry dock June 2023 for maintenance wash down, replace damaged fenders, new antifouling. Owner also getting a new general arrangement, tank plan, line plan, structural drawings and new stability book. The vessel is powered by 2 x Baudouin 6 M16 (2018) with power output…
-
2432 hp twin Screw Towing Tug
Built in 1982, in the Netherlands. Hull is steel, flag Norway and classed DNV +1A TUG. The tug is Powered by 2 x Caterpillar D 399 PCTA with 2432 hp. Bow thruster is retractable 360 degrees Holland Roer type HRP-330-50. Has a bollard pull of 32 tonnes / 4 tons in all directions. It has…
-
16-tonne Floating Crane and Grab Dredger
Floating Crane built in 1989 with major repair to engines in 2021. The barge was built in 1990. Registered as Germany (ZSUK)”Unionszeugnis” gültig bis 27.10.2025. The barge is 32.0 m in length, 14.30 in width and has a depth of 3.0 m. Overall height is 9.20 m.The cranes is a Weserhütte W320 Caterpillar 6TB00262 215kW…
-
2012 hp Single Screw Towing Tug
Built in 1983, in the Italy. The tug has a steel hull and is classed NSB Tug or AH 100AE. It is powered by a Wartsila NOHAB DIESEL with 2012 hp. Cruising speed is 10 knots. Length is 25.05 m, breadth is 24.36 m and depth is 4.0 m. Location: South Europe …
-
720 hp Twin Screw General Purpose Towing Tug
Built in 2023 in Turkey, the tug is powered by 2 x Doosan L126TIH with 720 hp. Gearbox is Dongii DMT 170HL with ratio 4.48:1. Propellers are fixed in Kort nozzle : dia. 1300 mm. Bollard pull is 10T. The tug has a SWL 7.5 T deck winch and a SWL 900 kg @ 8…
-
12-inch & 16-inch Floating Hoses
12-inch & 16-inch Floating Hoses. Dynlop hoses used but reported to be in very good condition. Location: Baltic Sea Hoses available: Floating – 12″x9,1 m. Total – 8 pcs. Price 8 x 1176 EUR Floating – 16″x12,2 m. Total – 6 pcs. Price – 6 x 1,765 EUR Submarine – 1 pc 16″x12,2 m Total…
-
25-PAX Crew Boat – 10-knot Cruising Speed
Built in 1965 in the Netherlands with a Class of Local Dutch 5 nm offshore. Complete overhaul recently. Main engine was overhauled 2 years ago. Diesel gen set electric started, fitted 2 years ago. It has a overall length of 22m, a breadth of 5.10m and a draft of 1.95m. Has seats for 25 passengers.…
-
1650 hp Single Screw Towing Tug
Built in 1977, re-engined in 2000, the single screw tug is classed MCA Cat 2. The tug has a length of 25.28 m, breadth of 8.26 m and depth of 3.8 m. Bollard pull is 19 tonnes. Ballast capacity is 53 m3 The tug is powered by 1 x Caterpillar 35-1 @ 1800 RPM with…
-
16-tonne Floating Crane and Grab Dredger
Floating Crane built in 1989 with major repair to engines in 2021. The barge was built in 1990. Registered as Germany (ZSUK)”Unionszeugnis” gültig bis 27.10.2025. The barge is 32.0 m in length, 14.30 in width and has a depth of 3.0 m. Overall height is 9.20 m.The cranes is a Weserhütte W320 Caterpillar 6TB00262 215kW…
-
1000 hp, 14 m, 12-PAX 28-knot Crew Boat
Built in 2012 in GBI, the crew boat has a class U.K. MCA COP 12+2 / 60 MILES. The boat is powered by 2 Cummins QSC 8.5 with combined power of 1000 hp. Propulsion is 2 x FPP and max speed is 28 knots. Length overall is 14.9 m, beam is 5.0 m and draft…
-
46 m x 16 m x 3 x Flat Deck Pontoon (Deck Barge) w/ Fuel Cargo Tank
This barge was originally built in 1994/95. It is registered Germany (ZSUK)”Unionszeugnis” valid till 20.01.2026 and classed Germanischer Lloyd 100 A 5 I “Ponton” – discontinued. It has a 20.000 liter diesel tank. Location: Germany Principal Dimensions and Characteristics Built: 1994/95 Registry: Germany (ZSUK)”Unionszeugnis” valid till 20.01.2026 Class: Germanischer…
-
1000 hp Single Screw Towing Tug
Built in 1966 in Germany, the 1000 hp tug has a static bollard pull of 14 ton at 100% rating. Main engines (2) are Deutz SBA 6M 528. The tug has one towing hook with remote release. Maximum speed is 11 knots and cruising speed is 8 knots. Submersible pumps (3 units) have a total…
