-
3,600-tonne Lifting Jack Up Barge w/ 21 Pax Accommodations
48 x 28 x 4.5 m barge with 60 m legs. The jacking system is a SAMBO C.M.C. Lifting weight is 3600T and holding weight is 4,800T. Jacking speed up and down is 40 m/hr. The barge can operate in a depth of 40 m and wave height of 2.5 m. It has accommodations for…
-
60-inch Pipe Lay Barge w/ DP and 1000-tonne Revolving Crane
Built in 1976 and fully rebuilt and upgraded in 2009. Capable of laying pipes up to 60″ in offshore waters. Deck area is 1500m2. The barge can accommodate up to 280 persons. The main crane is a Clyde DE52 230 + 30 + 15 with capacity up to 1000t (fixed) at a radius of 22m…
-
750 m3 Per Hour Bucket Ladder Dredger
This Chain Ladder Dredger was built in 1975 in Germany. It has a capacity of 750 m3/h. It is classified as RRR (Russian River Register) KM*L2 R3-AUT2 EPP Dredger and can navigate 200 miles from shore. Location: North-West Russia General Year Built / Where Built: 1975 / Germany …
-
22-inch Cutter Suction Dredger (CSD) IHC Beaver 2300
The IHC Beaver 2300 has a suction diameter of 24-inches (607mm), a discharge diameter of 22-inches (559 mm) and a dredge pump capacity of 2600 m3/h. It is powered by a CAT 3516. Auxiliary powered by CAT 3412 & D398. Built in 1970. It has a length of 28m, a breadth of 10 m and…
-
36-inch Cutter Suction Dredger for Charter, South America
This listing is for a 36-inch Cutter Suction Dredger for Charter in South America. Location: Venezuela Principal Dimensions and Characteristics Length Over All 73 m 240-feet Beam: 14.7 m 48-feet Depth: 3.76 m 12-feet Draft: 1.6 m 5.3-feet Lightship: 1,000 tonnes Dredging Capacities Max. Dredging Depth: 18 m 59-feet Nominal Production: 2,200 m3/hr 2,878 m2/hr…
-
350-tonne Jack Up Barge for Pile Driving or Rock Drilling
This jack up barge is constructed in a “U” shape, so that it is open along the center for most of its length. The open end of the “U” is tied together by the superstructure. A 50-tonne electric crane is positioned over the open area, and travels the length of the barge on rails. The…
-
1,500-tonne Floating Sheer Leg Crane
This 1,500-tonne Floating Sheer Leg Crane was built in October, 1971 at the Hakodate Dock Co., Ltd in Japan. The barge was docked in 2011 and is not in operation, the hull is in good condition, the hoisting gear system needs to be refurbished and it was last certified 20 years ago with GL (Germanischer…
-
900 m3 Self-Propelled Split Hopper Barge
This 900 m3 Self-Propelled Split Hopper Barge was built in 2014 and its Classification Society is Bureau Colombo. Flag: Brazil Located in Brazil Also available for Charter Principal Dimensions and Characteristics Year Built: 2014 Classification Society: Bureau Colombo Length Over All: 61.01 m 200 feet Beam: 9.50 m 31 feet…
-
940 hp Tug Boat
This 940 hp Tug Boat was built in 1979 and is used for towing and relining anchors. It’s Classification Society and Notation is PMPC KM*R3, Navigation – coastal. Flag: Russia Located in Russia Principal Dimensions and Characteristics Year Built: 1979 Classification Society/Notation: PMPC KM*R3, Navigation – coastal Length Over All: 18.60…
-
SOLD: 3,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1985 in Belgium, the dredge has an Unrestricted navigation area, dredging over 15 miles from shore with H.S. 2.5 m; dredging within 15 miles from shore or within 20 miles from port. The max dredging depth is 36.5 m with a suction diameter of 900mm and a hopper capacity of 3500m3. Self-emptying channels…
