-
850 mm (34-inch) Cutter Suction Dredger
Built in 2011 in China, the dredger has a Classification of CCS Unrestricted Navigation. Total installed power is 13,671 KW. Inboard pumps (2) are IHC HRMD221-36-85 with shaft power of 3626 KW. Dredging depth is 6-28 m and suction and discharge diameters are both 850 mm. Discharge distance is 5-10 km. Cutter is a Bakker…
-
Not Currently Available: 883 m3 Trailing Suction Hopper Dredger
Built in 1965 in the UK and will be delivered under fresh Phoenix Class. The dredger has a dredging depth of 26m. Discharge is via bottom door. Cargo load time is 5000 m3/hr and has a hold capacity of 883 m3. The dredger has an overall length of 62.17m, breadth of 58.03m and depth of…
-
Not Available: Bucket Wheel Dredger and matching Hopper Barge Set
Available for charter or sale. The dredger has a dredging depth of 18m and can be extended to 24m. Bucket capacity is 775lt. The output rate is 750 m3/h. It is powered by 2 engines both full overhauled in 2021. The dredger has a length of 80.17m, a breadth of 14.42m and a depth of…
-
18-inch Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
-
6 m3 Grab Bucket Dredger w/ Mitsubishi 8DC-61C Crane
6 m3 Grab Bucket Dredger was built in 1988. The dredge has a length of 33.62 m, a breadth of 16.0 m and depth of 2.50 m. The crane is a P & H FD600 with a capacity of 85 tons. Boom length is 32.0 m. Dredging capacity is 480 m3/h. The main engine is…
-
750 m3 Per Hour Bucket Ladder Dredger
This Chain Ladder Dredger was built in 1975 in Germany. It has a capacity of 750 m3/h. It is classified as RRR (Russian River Register) KM*L2 R3-AUT2 EPP Dredger and can navigate 200 miles from shore. Location: North-West Russia General Year Built / Where Built: 1975 / Germany …
-
1,800 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1983 in The Netherlands, this 1,800 m3 trailing suction hopper dredger has a dredging depth of 30 m and a suction pipe diameter of 60 mm. Powered by Wartsilla, SW260 engine with controlled pitch propeller and electric bow thruster. The dredger length is 89.97 m , width is 12.45 m and the loaded…
-
1,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1975 in the Netherlands, has a single rake cabin pump and a 4.7 T rake head. The rake pipe diameter is 700 mm. The dredge operates at a depth of 18 m. The dredge has a length of 83.85 m and a breadth of 13.00 m. Navigation area is offshore. Location: South China…
-
2,400 m3 Trailing Suction Hopper Dredger (TSHD)
Dredge has a maximum excavation depth of 30 m. Rake diameter is 700 mm with a single rake cabin pump suction method. Discharge is through bottom doors. There are rows of 16 piece bottom doors, each of which is driven by a hydraulic cylinder. The dredge is powered by 2 x 8Sw280 with 1850 kW…
-
2690 m3 Trailing Suction Hopper Dredger (TSHD)
Rebuilt in 2006 from a container vessel, this dredger has a load capacity of 2770T in 2690 m3 hopper. Load time is 45 minutes and discharge time is 15 minutes. Dredging depth is 30 m (98-ft). Pipe diameter is 650mm (25.6-inch). Submerged generator/pump rate of 6500 m3/h. The vessel is powered by a DEUTZRBV8M540 3200…
-
27,000 m3 Trailing Suction Hopper Dredger (TSHD)
This Vessel has the function of the Dredging capacity which is 11,500m3/Hr pump from 15m~60m, and the Discharge capacity which is Dumping Conical Valve system, Shore delivery system(4,000m3/Hr), and Rainbow system. The dredger is 206.75 m (677.5-feet) in length with a draft of 12.351 m (40.5-feet). This Vessel was converted from 54,000 Ton Class Grain…
-
7000 m3 Trailing Suction Hopper Dredger (TSHD)
This 7200 m3 capacity hoop dredge has total installed power of 11,163 kW. Unloading can be handled by either pump ashore, bottom hump or rainbowing. Pumping distance is approximately 1500 m (4,921-feet) and rainbowing approximately 50 m (164-feet). The dredger has accommodations for 33 persons. Note that when current owners took delivery, dredger was comprehensively…
-
1365 m3 Trailing Suction Hopper Dredger w/ Rainbowing
This Trailing Suction Hopper Dredger has 2 x 460 kW IHC HOLLAND, electric dredge pumps each with a suction diameter of 600 mm (24-inch). The hopper can hold a max of 1365 m3 (1,785 yd3) and can unload via hydraulically operated bottom doors, pump ashore installation or rainbow installation capable 45° ± 35 m ashore. …
-
4,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 2007 in China, this dredger has been working in Western India since 2007 with the same owner. The dredger has 22 section bottom dump Hopper with a hold capacity of 4500 m3 and a telescopic hydraulically operated weir level overflow system. The vessel has accommodations for 29 persons. Location: India …
-
522 m3 Trailing Suction Hold Dredger with Conveyor Off Loading and Shore Pump out
This 522 m3 Trailing Suction Hold Dredger with Conveyor Off Loading and Shore Pump out was specially built in the Netherlands in 1965, was rebuilt in 1989 and has been modified several times since. Location: The Netherlands Principal Dimensions and Characteristics Year Built/Rebuilt: 1965 / 1989 Length: 72.65 m 238-feet Width: 7.12 m 23-feet Height:…
-
337 Bobcat Excavator mounted on Amphibious Undercarriage
This 337 Bobcat Excavator mounted on Amphibious Undercarriage was built in 2009 and currently has 5,274 runtime hours. The undercarriage is constructed of Corten steel with coal tar paint on the outside and inside of the pontoons. It has stainless steel inspection plugs, hydraulic lines and cylinders. It is also equipped with keyless ignition and…
-
950 m3 Self-Propelled Split Hopper Barge w/ 6.5 m3 Grab
This 950 m3 Self-Propelled Split Hopper Barge w/ 6.5 m3 Grab was built in 2006 and the Classification Society is Inspeccion de Buques de la Direccion General de la Marina Mercante (Spanish Local Class). The vessel was last dry docked in the summer of 2015 for approx. 80/90 days in Spain. New navigation equipment was…
-
1,000 m3 Trailing Suction Hopper Dredger w/ Side Casting
This 1,000 m3 Trailing Suction Hopper Dredger w/ Side casting was built in 1978 in Japan. It’s Classification Society / Notation is KM (Kerajaan Malaysia) * L3 1 AUT2 Dredger. Located in the Black Sea Dimensions and Characteristics Year Built: 1978 Classification Society: KM (Kerajaan Malaysia) * L3 1 AUT2 Dredger Length…
