-
7,047 cbm TSHD For Sale
Dredge Info For sale, Trailing Suction Hopper Dredger (TSHD) with a capacity of 7,047 cbm. Operating water depth of 9-27m, with wind speeds below 13.8m/sec. Wave level below 5, and swell wave level below 3, suitable for operations with wave height below 2m. Unable to operate during typhoons or severe weather conditions with strong winds…
-
Trailing Suction Hopper Dredge (TSHD) / Aggregates Carrier
Dredge Info For sale, TSHD / Aggregates Carrier, located in the Netherlands. Accommodations refurbished / upgraded in 2022. Vessel Overview Type: TSHD Year Built: 1986 (Appledore Ferguson Shipbuilders) Flag: British Location: Netherlands Class Society and Notation: Bureau Veritas class due 11.2026, last dd 3.2024 incl hull and af. 6.300 TDW on draft loaded 6.7 m…
-
Trailing Suction Hopper Dredger
Trailing Suction Hopper dredge with 974 m3 in hopper. Built in 1981 in France, repowered in 2008. It has a maximum dredging depth of 16 m (52.49 ft). Length of 62.0 m, beam of 10.5 m, a depth of 3.5 m. Suction pipe diameter of 600mm with side discharge. It is powered by 2 Cummings…
-
Not available – 2,306 m³ Trailing Suction Hopper Dredge For Charter
Dredge Overview For Charter. Trailing Suction Hopper Dredge (TSHD) with a hopper capacity of 2,306 m³. General Year Built: 1995 / Germany Type: TSHD Hull Material: Steel Class: RMRS Class Notation: KM★R1 AUT1 Hopper dredger Dimensions Length Overall: 99,83 m Width: 17,70 m Gross Tonnage: 3785 tons Characteristics Sailing speed loaded: 10 knots Max. draught…
-
Not Available – 850 mm (34-inch) Cutter Suction Dredger
Built in 2011 in China, the dredger has a Classification of CCS Unrestricted Navigation. Total installed power is 13,671 KW. Inboard pumps (2) are IHC HRMD221-36-85 with shaft power of 3626 KW. Dredging depth is 6-28 m and suction and discharge diameters are both 850 mm. Discharge distance is 5-10 km. Cutter is a Bakker…
-
SOLD: 2690 m3 Trailing Suction Hopper Dredger (TSHD)
Launched in 2006 by Fujian Xiongying Shipyard. The dredger’s voyage area is Coastland & (A1 +A2). Loading time for the 2690 m3 hopper is 45 minutes. Discharge time is 15 minutes. Flowing for slop pump is 6500m3/h. Dredging depth underwater is 30 m (98.4-ft). The dredger has a length of 87.8 m (288-ft), a beam…
-
Not Available: 27,000 m3 Trailing Suction Hopper Dredger (TSHD)
This Vessel has the function of the Dredging capacity which is 11,500m3/Hr pump from 15m~60m, and the Discharge capacity which is Dumping Conical Valve system, Shore delivery system(4,000m3/Hr), and Rainbow system. The dredger is 206.75 m (677.5-feet) in length with a draft of 12.351 m (40.5-feet). This Vessel was converted from 54,000 Ton Class Grain…
-
Not Available: 7000 m3 Trailing Suction Hopper Dredger (TSHD)
This 7200 m3 capacity hoop dredge has total installed power of 11,163 kW. Unloading can be handled by either pump ashore, bottom hump or rainbowing. Pumping distance is approximately 1500 m (4,921-feet) and rainbowing approximately 50 m (164-feet). The dredger has accommodations for 33 persons. Note that when current owners took delivery, dredger was comprehensively…
-
Sold – 1,535 m3 Trailing Suction Hopper Dredger (TSHD)
The Dredge was originally built in 1956 and was built by IHC Holland Sliedrecht – Netherlands and was refurbished in 2001. The vessel is loaded by a single drag head, and discharged by bottom dumping doors. Not equipped for shore pump out. Currently Committed until September 2018. Located in Pakistan Also for Charter Dimensions and…
-
Not Available – 1,800 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1983 in The Netherlands, this 1,800 m3 trailing suction hopper dredger has a dredging depth of 30 m and a suction pipe diameter of 60 mm. Powered by Wartsilla, SW260 engine with controlled pitch propeller and electric bow thruster. The dredger length is 89.97 m , width is 12.45 m and the loaded…
-
SOLD: 3,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1985 in Belgium, the dredge has an Unrestricted navigation area, dredging over 15 miles from shore with H.S. 2.5 m; dredging within 15 miles from shore or within 20 miles from port. The max dredging depth is 36.5 m with a suction diameter of 900mm and a hopper capacity of 3500m3. Self-emptying channels…
-
SOLD: 522 m3 Trailing Suction Hold Dredger with Conveyor Off Loading and Shore Pump out
This 522 m3 Trailing Suction Hold Dredger with Conveyor Off Loading and Shore Pump out was specially built in the Netherlands in 1965, was rebuilt in 1989 and has been modified several times since. Location: The Netherlands Principal Dimensions and Characteristics Year Built/Rebuilt: 1965 / 1989 Length: 72.65 m 238-feet Width: 7.12 m 23-feet Height:…
-
Sold – 650 m3 Trailing Suction Hopper Dredge For Sale
Dredge Info 650 m3 Trailing Suction Hopper Dredge (TSHD) for sale. Built in 1972 in Spain. Location: Southern Spain Year Built / Place: 1972 / Spain Hull material: Steel Flag: Spain Class Society and Notation: LAID UP, Hopper Capacity: 650 m3 Converted into trailing suction split hopper dredger in 1996 Last Dry Dock in 2017…
-
Not Currently Available: 883 m3 Trailing Suction Hopper Dredger
Built in 1965 in the UK and will be delivered under fresh Phoenix Class. The dredger has a dredging depth of 26m. Discharge is via bottom door. Cargo load time is 5000 m3/hr and has a hold capacity of 883 m3. The dredger has an overall length of 62.17m, breadth of 58.03m and depth of…
-
Not Available: 4700 m3 Trailing Suction Hopper Dredger w/Rainbowing
Built in 1986 by IHC Holland in The Netherlands, the Trailing Suction Hopper Dredger has a class notation of Russian Maritime Register of Shipping. The dredger has 2 x 810 kW IHC HOLLAND, electric dredge pumps each with a suction diameter of 700 mm (28-inch). The hopper capacity is 4700 m3 (6,147 yd3) and can…
-
Not Available: 2690 m3 Trailing Suction Hopper Dredger (TSHD)
Rebuilt in 2006 from a container vessel, this dredger has a load capacity of 2770T in 2690 m3 hopper. Load time is 45 minutes and discharge time is 15 minutes. Dredging depth is 30 m (98-ft). Pipe diameter is 650mm (25.6-inch). Submerged generator/pump rate of 6500 m3/h. The vessel is powered by a DEUTZRBV8M540 3200…
-
Not Available: 1,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1975 in the Netherlands, has a single rake cabin pump and a 4.7 T rake head. The rake pipe diameter is 700 mm. The dredge operates at a depth of 18 m. The dredge has a length of 83.85 m and a breadth of 13.00 m. Navigation area is offshore. Location: South China…
-
Not Available: 2,400 m3 Trailing Suction Hopper Dredger (TSHD)
Dredge has a maximum excavation depth of 30 m. Rake diameter is 700 mm with a single rake cabin pump suction method. Discharge is through bottom doors. There are rows of 16 piece bottom doors, each of which is driven by a hydraulic cylinder. The dredge is powered by 2 x 8Sw280 with 1850 kW…
