-

SOLD: 120 m3 Hopper Dredger with 2 m3 Grab
This is a modern, compact and efficient self-propelled grab hopper dredger. Equipped with a 360 degree azimuth propulsion unit, self-elevating spud legs and a shallow draft, she is highly maneuvrable vessel able to dredge in more confined hard to reach areas. Operating with a small crew she is an efficient choice for smaller dredge requirements…
-

SOLD: 8-inch Remote Controlled Dredge – Mud Cat 100E
Brand new Mud Cat™ Dredge. This unit has zero hrs on it. It sat on a pond for about 4 months and then has been in a storage container ever since. This unit has several extra’s. Radio Remote control with hand held remote 600’ of Power Cord A/C unit for electrical enclosure Hydraulic oil cooling…
-


SOLD: 546 hp Twin Screw Workboat w/ A-frame Hoist
Multicat workboat built in 2014 in Egypt. Class BV Coastal 20 nm offshore. Powered by 2 x Caterpillar 3406 6 cyl with total power of 546 hp. The workboat is 24.0 m in length and has a breadth of 8.0 m. Free deck space is 96 m2. It has an Hydraulic Crane with 4.5 tons…
-


Not available – 1826 m3 Trailing Suction Hopper Dredger (TSHD)
Four deck suction hopper dredger. Maximum dredging depth is 20 m. Hold capacity is 1826.42 m3. The dredger is equipped with electronic positioning fixing system. It is powered by 2 x BL 230.6 engines with total power of 1940 kw. Propulsion and steering controls are two propellers and two rudders. Location: Black Sea General …
-


SOLD: 8-inch SDR 17 & SDR 26 HDPE Pipe Mixed
Approximately 2,400 m of 8-inch SDR 17 & SDR 26 HDPE Pipe mixed with couplings and flanges. 200 pieces of 12 m lengths. Pipes was only used 100 hours total. About 50 pieces were never used (new). Produced in 2019. Can be purchased en-bloc with 200824-PF and 200822-CP Location: Netherlands Standard Dimension Ratio (SDR) 17…
-

SOLD: 16-inch SDR 17 HDPE (Polypipe) New Surplus
Quantity Available – 1,000 ft in 40-foot lengths (25 pieces total). New Surplus. Location: State of Florida, USA Principal Dimensions and Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 406.4 mm 16 inches Pipe ID (Nominal) 356 mm 14.005 inches Wall Thickness (Nominal) 24 mm…
-


SOLD: 225 mm (8-inch) Pipe Floaters
200 piece floaters for 8-inch pipe. Built in 2019. Can be purchased en-bloc with 200822-CP and 200823-PP Location: Netherlands
-


SOLD: 7316 m3 Trailing Suction Hopper Dredge (TSHD)
Built in 2021 in China, the TSHD has 2 sets x 8000cbm inboard dredging pumps. Max dredging depth is 36 m. Hopper capacity is 7310cbm. Dredger main engines are 2 x DN8330ZC engines with 3310kw each with cruising speeds of 13.6k. Location: China General Built: 2021, China Flag: China Class: CSS Dimensions…
-


SOLD: 160 mm Dragflow HY85 160 HC Submersible Pump (2 Available)
Built in 2018 at Dragflow in Italy. Hydraulic motor. Pump has been used for only 300 hours. Suitable for bentonite water, slurry water, sand-water, salt sand water, etc. Can be purchased en-bloc with 200824-PF and 200823-PP Location: Netherlands General Information Built: 2018 / Italy Working Hours: 300 hr Principal Dimensions and Characteristics Weight: 885 kgs…
-


SOLD: 8-inch Cutter Suction Dredger (CSD)
This DSC dredge was rebuilt in 2018 (built 1997) and has new controls switches and wiring new paint and a new seat. The CAT 3116 was overhauled as well, injection pump rebuilt alternator and starter inspected and tested. All functions were tested on land before going to storage. Minimum dredging depth is 3-ft and maximum…
-


SOLD: 12-inch SDR 17 HDPE Pipe
4,000-feet available – 12-inch SDR 17 HDPE Pipe. Mostly in 50-ft sections. The pipe was used for a few dredging projects over a few months pumping mud/clay/water slurries. SOLD Location: State of California, USA Principal Dimensions and Characteristics Material High Density Polyurethane Pipe OD (Nominal) 12-inches 304.8 mm Pipe ID (Nominal) 12.75-inches 323.6 mm Wall…










