-
SOLD: 2840 DWT Deck Barge 60m x 20m x 4m (Flat Top Pontoon)
There are two sister ships for sale or charter. Deck plating is 16mm, extra heavy deck. The clear deck area is 1175m2 and a deck load of 20 ton/m2. The deck is accessible via bow & stern section for ramps (8 x 1.5 m each). The barge has 2 spud wells. Location: UK Coast BARGE…
-
SOLD: 10-inch Cutter Suction Dredge
This is a 10-inch Cutter Suction Dredge The dredge is shop-built. It is in good operating condition. Pump and hydraulics are all in good condition. Dredge is currently in the water, and can be fully demonstrated during inspection. Location: State of Florida, USA Principal Dimensions and Characteristics Length Over…
-
SOLD: 3,200 bhp Twin Screw Ocean Going Towing Tug
The tug has accommodations for 15 persons and an endurance of 26 days. With 2 x Cummins KTA 50M2, the tug has combined 3,200 bhp. All navigation systems are in good condition. The latest use of this boat was 2.5 years ago. The tug is ready to go to work. GMDSS area – A1. SOLD…
-
SOLD: Cat 3516B Marine Gensets (Unused) – 2 available
Offshore Marine Gensets built 2011 but unused and kept in storage for a project which did not materialise. Common applications may include mid-water trawlers, crew boats, ferries, towboats and supply boats. Typical operation ranges from 3000 to 5000 hours per year. Price per unit. Location: Malaysia Principal Dimensions and Characteristics …
-
SOLD: 546 hp Twin Screw Workboat w/ A-frame Hoist
Multicat workboat built in 2014 in Egypt. Class BV Coastal 20 nm offshore. Powered by 2 x Caterpillar 3406 6 cyl with total power of 546 hp. The workboat is 24.0 m in length and has a breadth of 8.0 m. Free deck space is 96 m2. It has an Hydraulic Crane with 4.5 tons…
-
Not available – 1826 m3 Trailing Suction Hopper Dredger (TSHD)
Four deck suction hopper dredger. Maximum dredging depth is 20 m. Hold capacity is 1826.42 m3. The dredger is equipped with electronic positioning fixing system. It is powered by 2 x BL 230.6 engines with total power of 1940 kw. Propulsion and steering controls are two propellers and two rudders. Location: Black Sea General …
-
Sold – 91 m, 7,400 DWT Deck Barge
Built in 2012 in China, it was used by the shipyard that built her for light shipyard work. The barge remains in very good condition and ready to be put in service.. Ramp door & hydraulic winch were installed in 2019. Barge is 91.5 m in length, 24.4 m in breadth and has a depth…
-
SOLD: 8-inch SDR 17 & SDR 26 HDPE Pipe Mixed
Approximately 2,400 m of 8-inch SDR 17 & SDR 26 HDPE Pipe mixed with couplings and flanges. 200 pieces of 12 m lengths. Pipes was only used 100 hours total. About 50 pieces were never used (new). Produced in 2019. Can be purchased en-bloc with 200824-PF and 200822-CP Location: Netherlands Standard Dimension Ratio (SDR) 17…
-
SOLD: 16-inch SDR 17 HDPE (Polypipe) New Surplus
Quantity Available – 1,000 ft in 40-foot lengths (25 pieces total). New Surplus. Location: State of Florida, USA Principal Dimensions and Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 406.4 mm 16 inches Pipe ID (Nominal) 356 mm 14.005 inches Wall Thickness (Nominal) 24 mm…
-
SOLD: 225 mm (8-inch) Pipe Floaters
200 piece floaters for 8-inch pipe. Built in 2019. Can be purchased en-bloc with 200822-CP and 200823-PP Location: Netherlands
-
SOLD: 7316 m3 Trailing Suction Hopper Dredge (TSHD)
Built in 2021 in China, the TSHD has 2 sets x 8000cbm inboard dredging pumps. Max dredging depth is 36 m. Hopper capacity is 7310cbm. Dredger main engines are 2 x DN8330ZC engines with 3310kw each with cruising speeds of 13.6k. Location: China General Built: 2021, China Flag: China Class: CSS Dimensions…
-
SOLD: 160 mm Dragflow HY85 160 HC Submersible Pump (2 Available)
Built in 2018 at Dragflow in Italy. Hydraulic motor. Pump has been used for only 300 hours. Suitable for bentonite water, slurry water, sand-water, salt sand water, etc. Can be purchased en-bloc with 200824-PF and 200823-PP Location: Netherlands General Information Built: 2018 / Italy Working Hours: 300 hr Principal Dimensions and Characteristics Weight: 885 kgs…
-
SOLD: 400 m3 Self-Propelled Split Hopper Barge
Built in 1997 and completely renovated in 2019, and both engines were replaced by two new ones. The split hopper barge has a hold capacity of 400m3 (523 yd3). It is powered by 2 Diesel Volvo Penta engines with 630 hp. It has 2 Azimuthal Columns Aquamaster Rauma thrusters. The barge has a GT of…
-
SOLD: 7905 DWT Ballastable Barge for Charter
Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…
-
SOLD: 8-inch Cutter Suction Dredger (CSD)
This DSC dredge was rebuilt in 2018 (built 1997) and has new controls switches and wiring new paint and a new seat. The CAT 3116 was overhauled as well, injection pump rebuilt alternator and starter inspected and tested. All functions were tested on land before going to storage. Minimum dredging depth is 3-ft and maximum…
-
SOLD: 12-inch SDR 17 HDPE Pipe
4,000-feet available – 12-inch SDR 17 HDPE Pipe. Mostly in 50-ft sections. The pipe was used for a few dredging projects over a few months pumping mud/clay/water slurries. SOLD Location: State of California, USA Principal Dimensions and Characteristics Material High Density Polyurethane Pipe OD (Nominal) 12-inches 304.8 mm Pipe ID (Nominal) 12.75-inches 323.6 mm Wall…
-
SOLD: Self Propelled Floating Revolving Crane Demag 410e
Built in 1966 in Germany, the barge was rebuilt in 1980. Self propelled crane barge has a new class for European inland water. The crane is a Demag 410 hoisting/dredging crane. On the stern deck, there is a 16 tons A-frame for 16 tons hydraulic hoisting. The barge is powered by 2 Daimler Benz Germany…
-
SOLD: Crane Barge Anchoring System
Components for a four-point anchoring system. Barge not included. Package includes winches, hydraulic power units, interconnecting line packages, vertical fairleads, anchors and buoys. 1) Quantity Four (4) ACE 30 Heavy Ton Winches. 2) Quantity Two (2) ACE 89 kW Hydraulic Power Units, Open Loop Diesel 3) Quantity Four (4) ACE Interconnecting Hydraulic Line Packages 4) 5…
