-
SOLD: 900 hp Twin Screw Pushboat (Towboat)
Powered by 2 x 12V71 Detroit engines with total of 900 hp. Engines have approx. 5000 work hours. Towboat has a length of 56-ft, width of 22-ft and depth of 8-ft. Fuel capacity is 9000 gallons. Boat is fully functional – engines ran smoother and quietly, tug neat and clean. Complete support equipment is included.…
-
Not Available – 16-inch SDR 17 HDPE
Quantity Available – 6,000-ft in 500 to 1000 foot strings. $14.30 per foot Location: State of Louisiana, USA Dimensions and Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 406.4 mm 16 inches Pipe ID (Nominal) 356 mm 14.005 inches Wall Thickness (Nominal) 24 mm 0.941 inches Weight Per Foot 19.42 lbs per foot Standard…
-
Sold – 50-tonne Modular Jack Up Barge
15 m x 12 m x 1.5 m dismountable jack up barge. Movable using 5 trucks (3 x 40-ft and 2 x 60-ft). Spuds are 20 m in length and wall thickness of 20 mm. The barge has a deck load of 15 t/m2 and a deck lifting capacity of 50 tonnes. Location: Ireland Principal…
-
SOLD: 357 m3 Non-Self-Propelled Bottom Dumping Hopper Barge
For sale or charter. Built in 1980 in Portugal. The barge has a length of 44.89 m and a breadth of 8.16 m. DWT is 826 tonnes. Location: Northern Europe General Built: 1980 / Portugal Hull Material: steel Principal Dimensions and Characteristics Length Over All: 44.89 m 147.3-ft Breadth: 8.16 m 26.77-ft DWT: 826 tonnes…
-
SOLD: 3,200 hp Twin Screw Ocean Towing Tug
This listing is for a 3,200 hp Twin Screw Ocean Towing Tug built in 2014 in China. Class Society and Notation is ABS. Next drydock is December 2019. Designed for endurance of 21 days. Accommodations include fully heated & air conditioned for 10 men in five cabins. Lifesaving to meet SOLAS requirements. Fire Fighting to meet SOLAS requirements. Flag: Kazakhstan…
-
Not available – 12-inch SDR 11 HDPE Pipe (Polypipe)
Quantity Available: -65,000-feet cut in 50-ft lengths. Reported to have no internal wear. Pipe used to transport water. Location: State of Pennsylvania, US Principal Dimensions and Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 12.75-inches 324 mm Pipe ID (Nominal) 10.293-inches 261 mm Wall Thickness…
-
SOLD: 26-inch SDR 11 HDPE Pipe (High Density Polyethylene)
Quantity Available – 850-feet of 26-inch SDR 11 HDPE Pipe. 21 pieces of 50-foot length and 14 pieces of 20-foot length. The pipe is used in good condition with minor scratches due to handling. Was used for water line construction. Location: State of California, USA Principal Dimensions and Characteristics Material High Density Polyethylene (Black) Pipe…
-
SOLD: 17-inch, HDPE Polypipe 1.1-inch Wall SDR 15
Quantity available: 141 feet in various lengths. Pipe lengths are 2-50 foot length, 1-22 foot length and 1-19 foot length NOT AVAILABLE 2 pcs 50-foot long 1 pcs 22-foot long 1 pcs 19-foot long TOTAL 141-FEET Location: State of Florida, USA
-
SOLD: 8000 m3 Trailing Suction Hopper Dredger (TSHD)
The 8000 m3 hold capacity dredger has a dredging depth of 38 m. The dredge pumps are IHC HYTOP/HRMD172-36-85 x 2 sets, 10800 CBM. Method of discharge is rainbowing. GT/NS is 8031/4497. The overall length is 121 m, the breadth is 22 m and depth is 9 m. Draft is 4.182 m / 6.50 m.…
-
SOLD: 10-inch Disch. Horizontal Cutter Dredger IMS Model 4010
Built in 2001. Designed and built by IMS, this 177 horsepower unit was made as a self-contained and portable hydraulic power source. The primary purpose of the power unit is to furnish high-pressure fluid to power the hydraulically driven IMS pumping system. The Murphy hour meter reads 641 hours. The dredge is in complete running…
-
Sold – 5 m3 Komatsu PC800 Excavator Dredger
Multi-functional pontoon with new Komatsu PC800 boom excavator. Full under Bureau Veritas class well maintained by owners. The dredger is 44m (144.4-feet) in length with a breadth of 11.38m (37.4-feet) and 4 stabilizing spuds. The excavator is a Komatsu PC800 and was built in 2018. The excavator has a dredging depth of 15m (49-feet) and…
-
SOLD: 14-inch Cutterhead Module with Cutterhead and 65 hp drive
Dredge works 65 HP cutter drive with pump and end ladder. The cutterhead has a 14-inch suction. Location: State of Nebraska, USA
-
Not Available: 80 m x 20 x 4 m – Ballasted Deck Barge
Built in 1998 in Denmark, the deck barge has a surface load of 15 T/m2 or bogie load of 32.0 T. Ballast water capacity is 8615,5 T with ballast pump capacity of 2 x 600 m3/h. Location: East Mediterranean General Built Year: 1998, Denmark Principal Dimensions Length: 84,61 m 278-ft …
-
Not Available: 1,350 m3 NEW BUILD Self Propelled Hopper Barge
Bottom door dump barge is 90% complete. Estimate 2 months to complete upon purchase agreement. Barge has 16 bottom doors, 8 cells. Hydraulic system opens doors. The barge is powered by 2 engines each with 800 hp (597 kW) and 2 Schottlet propellers. The barge has accommodations of 5 x cabins (1 Master’s and 4…
-
SOLD: 18-inch (450 mm) Cutter Suction Dredger (CSD)
The IHC Beaver 1200 C Cutter Suction Dredger was built in 2004. Prime mover is a Caterpillar 3508 (Top End 2020 ) with 620 kW. The engine has 37,000 working hours. The dredge pump is a 2016 IHC-1100-200-400. Aux power is a Caterpillar 3306 overhauled in 2019. It has 4,000 hrs. Max dredging depth is…
-
Sold – 80 tonne Modular Jack Up Barge
18 m x 12 m dismountable jack up barge. Movable using 10 trucks (8 x 40-ft and 2 x 60-ft). Spuds are 18 m in length and wall thickness of 25 mm. The barge has a deck load of 15 t/m2 and a deck lifting capacity of 80 tonnes. Location: Ireland Dimensions and Characteristics …
-
SOLD: 14-inch Jet Assisted Cutter Suction Dredge – Ellicott 870-JD – Jones Act Compliant
The 870 Series Jet Dragon® combines the reliability and durability of our industry proven Ellicott dredge while adding a ladder mounted dual hydra jet pump, to increase efficiency at deeper digging depths. Both the main pump engine and auxiliary engine are Caterpillar low emission ACERT engines. Max dredging depth is 60-ft. Swing width at max…
-
Sold – 8-inch Horizontal Cutter Dredger Mud Cat MC275D
This Mud Cat MC275D has 2,324 hours on it. The dredging system is one truck transportable and comes with cable drive system as well as a robust dual marine prop drive system for self-propelled dredging. The John Deere Diesel engine has 300hp (224kW). Dredging depth max is 25-ft with nominal capacity of 3,000 GPM (681m3/hr).…
