-
SOLD: 4 m3 Grab Bucket Dredger w/ Liebherr HS 853 45-tonne Crane
Liebherr HS 853 HD excavator powered by V 8 cylinder diesel engine with a power rating of 400kW @ 1900 rpm. The crane has a max boom length of 29.0 m and min length of 11.0 m. Max capacity is 5.1 T @ 28.0 m reach. Bucket capacity is 4.0 m3. The barge is 28.0…
-
Sold – GIW 12″ x 10″ Underwater Pump
GIW 12″ x 10″ Underwater Pump Location: State of Nebraska, USA
-
Sold: Excavator Pump Attachment 10-inch Eddy Pumps
Non-clog design for high solids industrial pumping applications. Min flow of 1200 gal/min and a max flow of 5000 gal/min. Has a capacity of 300-350 yd3/hr. Only used on one job. Very low hours and in excellent condition. The attachment is currently set up for a Komatsu 400 excavator. Requires a separate Hydraulic Power Unit…
-
Not available – Self-Propelled Multipurpose Deck Barge with Dynamic Positioning
This self-propelled multipurpose deck barge was built in 1997. It has a Class Society nad Notation of Lloyds Register Sea Going. The barge has a Kongsberg KPOS11 DP system and 2 Azimuth Thrusters. Total main power is 1469 kW (1970 hp). The barge deck load is 10T/m2. It is next due for DD and SS…
-
SOLD: 150-tonne Self-Propelled Revolving Crane Barge
The floating crane can lift loads up to 150 mt, transport them on water and precisely position them. The crane is more flexible than mobile or port cranes in the handling of heavy and/or oversized cargo. Due to the floating cranes, waterside operations do not stain the quay. On the cranes’ cargo, loads can be stowed and transported over longer distances before safely being offloaded…
-
Sold – 200 mm (8-inch) Electric Powered Cutter Suction Dredge
Dredge Info This dredge was built in 1990. The dredge is fully electrical dredge and is in very good condition and very easy to operate. The price includes 250 m cable 4 x 180 and 250 m metal hose and all necessary needs to work. The dredge can be plugged into a 400 kw-380 V…
-
Sold – 3300 PSI 25 GPM Hydraulic Power Unit (HPU)
This HPU is driven by a Tier 4 Certified JCB Engine. Operating pressure 1200-3300 PSI with a hydraulic flow of 0-52 GPM. Hydraulic tank and diesel tank are both 120 gallons. 4″ x 10″ box tube skid rails & 10″ forklift boots. Fully boxed frame tubing for added protection Location: State of South Carolina, USA…
-
SOLD: 4-inch SDR 9 HDPE Pipe (Polypipe)
Quantity Available: 29,500-feet in 500 foot rolls. Unused Surplus. 4-inch reinforced DR9 PE4710. Location: State of Texas, USA
-
SOLD: 18-inch SDR 15.5 HDPE Pipe
Quantity Available – 6,000-feet of 18-inch SDR 15.5 Pipe in 50-foot pieces. Minimum 3,000-ft per purchase. There are approx. 10 normal flanges on the pipe. The pipe was used for dredging, but has very little internal wear. There are almost no welds in the pipe and handling scuffs and scrapes are generally light. Can load…
-
SOLD: 3,500 m3 Trailing Suction Hopper Dredger (TSHD)
Built in 1985 in Belgium, the dredge has an Unrestricted navigation area, dredging over 15 miles from shore with H.S. 2.5 m; dredging within 15 miles from shore or within 20 miles from port. The max dredging depth is 36.5 m with a suction diameter of 900mm and a hopper capacity of 3500m3. Self-emptying channels…
-
Not available – 200mm Bucket Wheel Cutter Dredger
Dredge Overview Neumann built 8″ Bucket Wheel Cutter Suction Dredger, non – self-propelled. It has twin variable speed slurry pumps installed in series, often saving the need for installation of a booster pump into the discharge pipeline. The vessel was completely re-fitted in 2014 during which the whole power system, electrical system, positioning system and…
-
SOLD: 1300 hp Single Screw Towing Tug
Built in 1995 in the Netherlands. Last dry dock October 2022. Hull blasted and new coated. In 2018 the engines were out of the vessel and completely overhauled. Boat was built for and used by Port of Rotterdam authorities, hence always kept in tip top condition. Tug is powered by 2 x M.T.U. 12V 183…
-
Not Available: 10-inch Horizontal Cutter Dredger, IMS 4010
Built in 2002 in USA. Dredging depth of 6.1 m with a production capacity of 150 m3/hr. Discharge distance of 400 m. Hydraulic system pump is a Parker PAVC100BR46C3/PAVC65WB2R4A, a variable displacement, axial piston and a fixed displacement pump. Pump capacity is 100 gpm @2,000 psig. Cutter head has a diameter of 559 m and…
-
SOLD: Crisafulli SD110
2010 Crisafulli SD110 w/full cab, Yamaha 115 4 stroke engine and trailer. Also includes trailer full of pipe – approx. 500-ft. The dredger is a lightweight (9,000 pounds), small (25 x 8.5 foot) self-propelled pontoon hull. Cutter head is 102 inches, dredging depth max in 12-ft. Capacity of sludge processing is 85 yd3/hr. Discharge diameter…
-
Sold – 2″ SDR 7 HDPE Pipe
Quantity Available: 50,000-feet most in 40-ft sticks. Unused stock. Location: State of Colorado, USA Pipe Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 2.37 inches 60.2-mm Pipe ID (Nominal) 1.66 inches 42.2-mm Wall Thickness (Nominal) 0.339 inches 8.6-mm Weight Per Foot 0.95 pounds 0.4 kg Standard Dimension Ratio (SDR) 7 Our pipe inventory changes…
-
SOLD: 6-inch Dredge Pump, hydraulic driven.
Innovative Material Systems CDH100C dredge pump, Hours: 1,132 on meter, Serial: 1024, Cummins 4BT, Fuel type: Diesel, Inlet/discharge diameter: 6″, (2) pumps, Hydraulic driven, (7) suction pipes, (1) 10′ L, (3) 8′ L, (3) 3′ L, Trailer, 16′ L x 84″ W, Suspension: Spring, Axles: Tandem, Tire size: ST205/75R15, good condition. Location: State of Kansas,…
-
Not Available: 12-inch SDR 11 Polyethylene Pipe (HDPE, Polypipe)
Quantity Available: 35,000-feet in 50-foot lengths. Pipe has been fused for fresh water service. Sold only by the truckload. Minimum purchase of 2,400 ft (one truck load). Location: State of Texas, USA Principal Dimensions and Characteristics Material High Density Polyethylene (Black) Pipe OD (Nominal) 12.75-inches 324 mm Pipe ID (Nominal) 10.293-inches 261 mm Wall Thickness…
-
Sold – 8-inch Horizontal Cutter Dredger Mud Cat MC275D
This Mud Cat MC275D has 2,324 hours on it. The dredging system is one truck transportable and comes with cable drive system as well as a robust dual marine prop drive system for self-propelled dredging. The John Deere Diesel engine has 300hp (224kW). Dredging depth max is 25-ft with nominal capacity of 3,000 GPM (681m3/hr).…
