-
880 hp Twin Screw Near Shore Tug and GP Work Boat
This listing is for a 880 hp Twin Screw Near Shore Tug and GP Work Boat that was built in the United Kingdom in 2004. She is a twinscrew motor tug, certificated under the MCA Workboat Code of Practice for operation up to 60 miles offshore. She is available for towage and survey works throughout…
-
35-tonne BP Twin Cycloidal Propulsion Towing Tug
Built in 1977. The hull is built of Ordinary Strength Steel with five water tight bulkheads. Continuous main deck from Poop deck until the accommodation. The Forecastle is raised one level. The accommodation is in the middle and below there are the cycloidal propellers. Powered by a Stork Wartsila 4tew SWD 9 FHD 240 engine…
-
23-foot Flat Bottom HDPE Work Skiff
New Construction – the HDPE skiff is a length of 23-ft, beam of 8-ft 3-in, sides 24-in and a transom height of 25-in. Hull, floor and bench material thickness is 3/8” HDPE. Transom material is ¾” HDPE. Cabin and other accessory material are ¼” HDPE. Features recessed transom w/ storage, front platform/storage compartment and rear…
-
2,800 bhp Twin Screw Ocean Going Towing Tug
This 2,800 bhp, 29 ton Twin Screw Ocean Going Towing Tug has 2 x Mitsubishi S12R-MPTK. The tug travels at an economical speed of 10 knots and a maximum speed of 12 knots. Endurance is approximately 35 days and the tug has accommodates 17 persons. All navigation systems are in good condition. The latest use…
-
3,200 hp Twin Screw Ocean Towing Tug
This listing is for a 3,200 hp Twin Screw Ocean Towing Tug built in 2014 in China. Class Society and Notation is ABS. Next drydock is December 2019. Designed for endurance of 21 days. Accommodations include fully heated & air conditioned for 10 men in five cabins. Lifesaving to meet SOLAS requirements. Fire Fighting to meet SOLAS requirements. Flag: Kazakhstan…
-
Mud Cat Weed Harvester
This Mud Cat Weed Harvester is a Model #H5220 and comes with a trailer. Located in the State of Missouri, USA Principal Dimensions and Characteristics Length: 10.06 m 33 feet Width: 3.54 m 11.6 feet Cutting (Width x Depth:) 2.13 m x 1.83 m 7 feet x 6 feet Weight: 7,000 lbs. Paddle Wheel…
-
2,640 hp Deep Sea Towing Tug
This Tug was built in 1977 in the UK and is Classification Society is I.N.S.B A1+2+3 and the next Special Survey is in 02/2012. This vessel is in very good condition. Location for inspection/delivery: W. AFRICA / W. EUROPE (September) Principal Dimensions and Characteristics Year Built: Classification Society: Length…
-
SOLD: 25-PAX Crew Boat – 10-knot Cruising Speed
Built in 1965 in the Netherlands with a Class of Local Dutch 5 nm offshore. Complete overhaul recently. Main engine was overhauled 2 years ago. Diesel gen set electric started, fitted 2 years ago. It has a overall length of 22m, a breadth of 5.10m and a draft of 1.95m. Has seats for 25 passengers.…
-
SOLD: 12-person High Speed Crew Boat
Aluminum hull, 1260 bhp high speed crew boat was built in 2012 in Netherlands. It has around 6500 running hours. Class is BV Fast Utility Sea Area 3. Main engines are 2 x Caterpillar C7 and main propulsion is 2x Ultra jet 340. Cruising speed is reported as 21 knots. Fuel capacity is 0.87 m3…
-
SOLD: 500 hp Outboard Semi Rigid Zodiac 7530B
This Vessel was built in 2008 in Canada and its Class Notation is Cargo ship 3 rd cat (Division FR222), BV approved vessel with deep V and low center of gravity. Flag: French Located in Europe Principal Dimensions and Characteristics Year Built: 2008 Class Notation: Cargo ship 3 rd cat (Division FR222), BV approved…
-
SOLD: 1300 hp Single Screw Towing Tug
Built in 1995 in the Netherlands. Last dry dock October 2022. Hull blasted and new coated. In 2018 the engines were out of the vessel and completely overhauled. Boat was built for and used by Port of Rotterdam authorities, hence always kept in tip top condition. Tug is powered by 2 x M.T.U. 12V 183…