-
Offshore Anchor Handling Tug Supply Vessel
Offshore AHTS for sale. Located on the East Coast of the United States. Certificates expired since 2016. Year Converted/Modified 2002 Location: North America Quick Overview Year Built / Place: 1986 / United States Hull Material: Steel Class Society and Notation: ABS Towing Vessel, OSV, AH, AMS, DPS-2 Dimensions Length Overall: 73.15 m Breadth:…
-
20,60 m Pusher
20,60 m. Pusher available for sale. Engine had major repair work done in 2018. Location: Germany Quick Overview Vessel Type: Pusher Registry: Germany (ZSUK) – Unionszeugnis Year of Build: 1973 Shipyard (Pontoon): Hilgers AG, Rheinbrohl, Germany Length: 20,60 m Width: 6,82 m Draft: 1,76 m Main Engine: Schottel SRP 150 DB OM424A (12 Cylinder) /…
-
Truckable Push / Tug Boat
25.6′ truckable push / tug boat made of polyethylene. No maintenance hull. Perfect boat for pushing, towing or transport. Made of rugged, durable, and indestructible HDPE. General Information Fully customizable – including engines, equipment, size, trailer, etc. Made of HDPE Built to order Very quick turn around Built to suit your needs Low Maintenance Location:…
-
Multipurpose HDPE Workboat
Looking for a low maintenance workboat? The Assault 30 is a 30 ft. custom center console made of indestructible polyethylene (HDPE). Nothing will stick to it, and it won’t crack or dent. Perfect for a variety of work tasks including emergency response, support vessel, line handling, inland dock building, and more. General Information Fully customizable…
-
120 ft. Offshore Supply Support Vessel For Charter
120 ft. offshore supply vessel for charter. Built in 1980 in the United States. Location: Northern Europe Principal Information Length Overall: 36.8m / 120.73 ft Built: 1980 USA Hull Material: Steel Flag: San Marino Class Society and Notation: RINA Supply Vessel, Unrestr. Navig. Next SS: 07/2025 Breadth: 8.38m Draft: 3.42m NT: 85 tons GT: 284…
-
19m Steel Workboat For Sale
19m workboat with steel hull. Built in Egypt in 2024. Located in the Eastern Mediterranean. Two engines new 0 hours, Two generators new 0 HOURS, 50 KW EACH ONE PROPELLERS 98 CM EACH ONE, SHAFT 90 MM. Engines controlled from bridge and full alarm system in engine room (8 CAMERAS). GEARBOX ADVANCE 300 RATIO 3:1…
-
BP 35T Twin Engine Towing Tug
The hull of this towing tug is built of Ordinary Strength Steel with five water tight bulkheads. Continuous main deck from Poop deck until the accommodation. The Forecastle is raised one level. The accommodation is in the middle and below there are the cycloidal propellers. Location: Mexico Information & Dimensions Length LOA:LBP Registry:Beam Moulded…
-
126 ft. Fishing Vessel For Sale
126 ft. fishing vessel built in 1968 in Norway. In working condition, can go fishing on short notice. Location: Nordic General Information Built: 1968 / Norway Hull material: Steel Flag: Norway Class Society and Notation DNV Fishing Vessel, Ice C Rebuilt 2017 (2021 Poland – Class Work and Danish Seine conversion) Principal Information Length Overall:…
-
NEW 76 HP, 25-foot Tug Boat/Dredge Tender w/ A-frame
Factory built in 2016 but never used. The vessel has 2 side pontoon that are bolt mounted on the side of the hull. The length of the vessel is 24-ft 10-in and width of 13-ft (including side pontoons). The XinHong / XHSJ20-374A-00 winch is hydraulic and has a capacity of 3000 lbs. It has a…
-
710 hp, 17m Multicat
Built in 1991 and rebuilt in 2009, the Multicat was in dry dock June 2023 for maintenance wash down, replace damaged fenders, new antifouling. Owner also getting a new general arrangement, tank plan, line plan, structural drawings and new stability book. The vessel is powered by 2 x Baudouin 6 M16 (2018) with power output…
-
294 hp Single Screw Work Boat
Built in 1969 and in 2016 was rebuilt with 600,000 euros of improvements. The vessel has a free deck area of 72 m2 (86 yd2) and hopper cargo area of 600 tons. Next Dry dock is October 2020 and next Annual Survey is October 2019. It has a Classification of Local Ship Inspectorate Harbor. Flag:…
-
73.6 kW Utility Tug
Built in 1996 in the Netherlands, this tug has 1,000 hours of use. It has 73.6 kW @3000 RPM. It is 7340 mm in length and weights 5000 kg. Location: Portugal General Year Built/Location: 1996 / Netherlands Hours of Use: 1,000 h Dimensions and Characteristics Length Over All: 7.34 m 24.1-feet …
-
550 hp Multi-Purpose Work Boat For Sale and Charter
This 550 hp Multi-Purpose Work Boat was built in 2005 and it’s Classification Society and Notation is INSB (International Naval Surveys Bureau), Sailing area: Full European up to 20 miles from a safe haven. Flag: Cyprus Located in Northern Europe Principal Dimensions and Characteristics Year Built: 2005 Make/Model: Multicat Classification Society/Notation:…
-
18-foot Deep V HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft 9-in, beam of 7-ft 8-in and a transome height of 23-in. Sides are made from 12-in Round Tube with upper (21 ¾” Total). Hull, floor and bench material thickness is ½” HDPE. Transom and side material is ¾” HDPE. Hull carries a twelve-month warranty…
-
17-foot Modified V Hull HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft, beam of 7-ft 6-in, sides 23-in and a transom height of 20-in. Hull, floor and bench material thickness is 3/8” HDPE. Floor/Front platform material is ½” HDPE. Features: Transom material is 3/4″ HDPE, rear transom wells for battery and fuel tank, front platform with…
-
New Construction 23′ Modified V Hull HDPE Work Skiff
New Construction – the HDPE skiff is a length of 23-ft, beam of 8-ft 4-in, sides 34-in and a transom height of 20-in. Hull, floor and bench material thickness is 1/2” HDPE. Transom and upper deck material are 3/4″ HDPE. Features include fixed rear bench w/ storage, front platform/storage compartment and transom width to receive…
-
1000 hp Twin Screw Anchor Boat
Built in 1973 in Japan. The anchor boat is powered by 2 Yanmar 6M-UT (4-valve) engines with 500 hp each and has 2 set x Screw Propeller. The length of the boat is 22.59 m (74.11-ft), breadth is 8.0 m (26.25-ft and has a depth of 2.5 m (8.2-ft). Location: West Mediterranean Sea …
-
800 hp Single Screw General Purpose Towing Tug
Single screw tug is powered by a NIIGATA 6MG 20 CX 800hp engine. The tug has a length of 23.90 m, a breadth of 7.0 m and depth of 3.0 m. The tug was built in 1985 in Japan. Location: West Mediterranean Sea General Built Year / Place: 1985 / Japan Dimensions and Characteristics…
