-
1998 VMI 815 8″ Auger Dredge
Warman Ladder Mounted 8″ Pump 350 HP Cummins M11 Engine with 3,500 hours – recently rebuilt $150,000 invested into the dredge including Rebuilt engine All new hydraulics All new hoses All new wiring All new dredge steel and flex hose piping Brand new cutterhead, teeth, shroud and protective cage Rebuilt dredge pump with new impeller…
-
25,000 m3 Sand Carrier / Conveyor Unloading, Suction Loading
This ship is a self-priming and self-unloading sand ship propelled by a stern model, twin engines, twin propellers, twin rudders, and diesel engines; There are four deckhouses at the rear. The six cargo holds are arranged in the cargo area. This ship is a cargo ship that uses its own belt conveyor to unload granular…
-
57.8 m Low Air Draft Ro-Ro barge
Originally built for shipping airplane wings for Airbus in Wales. The low air draft and shallow draft makes it perfect for passing under low bridges and canals in cities. It has a low level cargo deck with 300 tons capacity, lift system to lower cargo pallet legs in to the hull for low air draft,…
-
10-inch SDR 17 HDPE Pipe
Quantity Available: Between 10,000-12,000-ft of 10-inch SDR 17 Pipe in 40-foot sections. Pipe can be banded for transportation. Location: State of New Jersey, USA USD 8.25 per foot Principal Dimensions and Characteristics Material High Density Polyurethane (Black) Pipe OD (Nominal) 10.75-inches 273.05-mm Pipe ID (Nominal) 9.410-inches 239-mm Wall Thickness (Nominal) 0.632-inches 16.05-mm Weight Per Foot…
-
SOLD – 20 inch Ellicott Dredge 1870
Built in 2019 by Ellicott. The series 1870 Dragon cutterhead dredge is a medium to large size dredge that is portable and can be transported by truck. It has a max dredging depth of 50-ft (15 m). Total installed power not including standard Genset is 1,755 hp (1,309 k). Power at Cutter Shaft is 250…
-
Pipe Floaters for 16-inch IPS pipe size
45 pairs of un-used, Neptune PF16-400-R 16” Floats. Location: State of California, USA
-
65 m, 1339 DWT Twin Screw Ro_Ro
Built in 2004 in Istanbul. The self-propelled barge has an over all length of 66.5 m, breadth of 64.63 m and depth of 16.6 m. GT is 975 and NT is 436. The barge is powered by 2 Baudouin engines with combined 2958 hp. Fuel capacity is 71.58 m3 and daily consumption is 11.32 m3.…
-
2432 hp twin Screw Towing Tug
Built in 1982, in the Netherlands. Hull is steel, flag Norway and classed DNV +1A TUG. The tug is Powered by 2 x Caterpillar D 399 PCTA with 2432 hp. Bow thruster is retractable 360 degrees Holland Roer type HRP-330-50. Has a bollard pull of 32 tonnes / 4 tons in all directions. It has…
-
46 m x 16 m x 3 x Flat Deck Pontoon (Deck Barge) w/ Fuel Cargo Tank
This barge was originally built in 1994/95. It is registered Germany (ZSUK)”Unionszeugnis” valid till 20.01.2026 and classed Germanischer Lloyd 100 A 5 I “Ponton” – discontinued. It has a 20.000 liter diesel tank. Location: Germany Principal Dimensions and Characteristics Built: 1994/95 Registry: Germany (ZSUK)”Unionszeugnis” valid till 20.01.2026 Class: Germanischer…
-
3,600-tonne Lifting Jack Up Barge w/ 21 Pax Accommodations
48 x 28 x 4.5 m barge with 60 m legs. The jacking system is a SAMBO C.M.C. Lifting weight is 3600T and holding weight is 4,800T. Jacking speed up and down is 40 m/hr. The barge can operate in a depth of 40 m and wave height of 2.5 m. It has accommodations for…
-
20,000-tonne Floating Dry Dock
Cassion Dock for transportation and launching. The Dry Dock has a lift capacity of 20,000 Ton and a Max draft of 5.7 m. It has a length of 76 m, an inside breadth of 48 m and outside breadth of 60.0 m. Ballast pump capacity is 3,000m3/h x 12m x 180Kw. It has 2 deck…
-
13 m3 Grab Bucket Dredger
Built in Japan in 1982, the dredger has a SKK 16013 GDT -A crane with a dredging depth of 50m (164-ft). The bucket is a light : 13m3 (40 Ton) / Heavy : 8m3 (45 Ton). The Rock Breaking Hammer capacity is 40 Ton/50 Ton. Gross tonnage is 2,098. Location: South Korea General Year Built:…
-
28.90 x 13.65 x 2.63 m Excavator Pontoon (Deck Barge)
The deck barge was built in 1976 and rebuilt in 2019. Comes with spud legs and lifting winches. Spuds (2) have a height of 14 m. Draft 0.65 m. Hydraulic vertical support legs built for the pontoon provides positioning depth of 12 meters. The total useful area of the pontoon is 394.5 m2. Location: Baltic…
-
2,500-tonne Deck Barge w/ 4-point Mooring and 2-spuds for Charter
Available for charter. The deck barge has a declk load of 10T/m2 and available area of 620 m2. It has 2 spuds with a length of 18 m and Double Drum Slipway Winch (4). The barge has an overall length of 62.59 m and breadth of 23.54 m. Light draught is 0.7 m and loaded…
-
24-inch SDR 17 HDPE Pipe
Quantity Available 2,000 feet 35 pieces of 50-ft lengths and 10 pieces of 25-ft lengths. Pipe used on a potable water pipeline construction project. Condition of the pipe is good with minor scrapes on the outside from handling. $15.00 per ft Location: State of California, USA Principal Dimensions and Characteristics Material High Density Polyurethane (Black)…
-
8 m3 Grab Dredger
318 Ton Grab Dredger built in 1986 in Japan. The dredger’s Class is KST. It is 33.62m in length and 16.0 in breadth and depth of 3.0 m. It has a SKK-1800GDT-A with a max dredging depth of 40m. Bucket size is Light 8m3 and Heavy 6 m3. Hammer (2) is 28 Ton. Engine is…
-
8 m3 Grab Dredger
The 394 ton Grab Dredger was built in 1989 in Japan. The crane is a SKK-1508GDT-F with a dredging depth of 40m. Bucket size is light 8m3 (25 ton) and heavy 5m3 (30 ton). Lifting capacity is 40 ton, 400m3/hr. Engine power is 1310hp x 1800 rpm. The dredger has a length of 36.48m and…
-
16 m3 Grab Dredger
This 758 GT Grab Dredger was built in 1979 in South Korea. It is classed KST. It has a SKK-13016GDT-A crane with lifting capacity of 100 Ton(60°) at 24.4m ~ 48.0m, 136 Ton(80°) at 12.7m ~ 25.30m. The max dredging depth is 50m with a dredging capacity of 290m3/hr. Bucket capacity is 16(Light, 45ton) /…
