-
Updated Price – 16-inch Cutter Suction Dredger (CSD) IHC Beaver 40
IHC Beaver 40 was built in 2018. Can be dismantled for easy transport. The dredging depth is 8m. The dredge pump is a IHC 900-175-350, single-walled and engine type is Caterpillar C18 TA Acert. Engine power is 483 kW @ 1800 rpm. Cutter type is a IHC Lancelot 955-50 with a diameter of 955 mm.…
-
Newly Listed – 8″ Horizontal Cutter Dredge VMI 815
This VMI 815 horizontal cutter dredge built in 2021 has 1,324 hours on it. The dredging system is one truck transportable and comes with a cable drive system. The Cummins Diesel engine has 345hp (257kW). The dredging depth maximum is 15-ft with nominal capacity of 3,000 GPM (11,356 L/min). Pipe, hose, floats, and cable are…
-
Newly Listed – 10″ Horizontal Auger Dredge
Location: Canada Principal CharacteristicsNew Hydraulic pumpRebuilt Engine 5.9 CumminsRebuilt dredging pump 10″Stainless Steal Ponton All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
-
1985 Mudcat by Ellicott Machine Corp dredge Model 815
1985 Mudcat by Ellicott Machine Corp dredge Model 815. Piping and trailer included. Located in Brown County Ohio East of Cincinnati. Would be a good unit for someone with a pond or marina. Location: State of Ohio, USA
-
1998 VMI 815 8″ Auger Dredge
Warman Ladder Mounted 8″ Pump 350 HP Cummins M11 Engine with 3,500 hours – recently rebuilt $150,000 invested into the dredge including Rebuilt engine All new hydraulics All new hoses All new wiring All new dredge steel and flex hose piping Brand new cutterhead, teeth, shroud and protective cage Rebuilt dredge pump with new impeller…
-
8-inch Swinging Ladder Dredge Ellicott 8010-HP
Built in 2008, rear “Kicker Spud” propulsion system. Two primary spuds. Hull mounted dredge pump with 8-in suctions and 8-in discharge with an impeller diameter of 19.5-in. Dredge has a minimum dredging depth is 2-ft 4-in and max depth of 15-ft. Powered by a Turbo-charged after-cooled John Deere diesel engine with a power rating of…
-
12-inch Horizontal Dredge IMS 7012
IMS model 7012 Horizontal Cutter Dredger built in 2014. Reported to be in good working condition. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge with a dry weight of 47,700 lbs (21,636 kg). Dredging depth is 30-ft using Starwheel Drive System and 32.8 using Cable Drive System. Cutterhead torque is 23,885 in.-lbs. (2,969…
-
10-inch Horizontal Cutter Dredger, IMS 4010
Built in 2002 in USA. Dredging depth of 6.1 m with a production capacity of 150 m3/hr. Discharge distance of 400 m. Hydraulic system pump is a Parker PAVC100BR46C3/PAVC65WB2R4A, a variable displacement, axial piston and a fixed displacement pump. Pump capacity is 100 gpm @2,000 psig. Cutter head has a diameter of 559 m and…
-
12-inch Horizontal Cutter Dredge IMS 7012
IMS model 7012 Horizontal Cutter Dredger. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. The 7012 HP is easy to operate, and its cutterhead design eats away a variety of materials such as sand, gravel, thick mud, light clays, and salt.…
-
10-inch Horizontal Dredge, IMS 3010
This 10-inch Horizontal Dredge IMS 3010 was built in 1998. A new Cummins engine was installed in 2008. Estimated hours on the engine is 500. In 2013, a new cutterhead was installed. Pontoons are rusted and will need to be replaced. Location: State of Texas, USA Principal Dimensions and Characteristics…
-
8-inch Horizontal Cutter Dredger Mud Cat MC275D
This Mud Cat MC275D has 2,324 hours on it. The dredging system is one truck transportable and comes with cable drive system as well as a robust dual marine prop drive system for self-propelled dredging. The John Deere Diesel engine has 300hp (224kW). Dredging depth max is 25-ft with nominal capacity of 3,000 GPM (681m3/hr).…
-
18-inch (450 mm) Cutter Suction Dredger (CSD)
The IHC Beaver 1200 C Cutter Suction Dredger was built in 2004. Prime mover is a Caterpillar 3508 (Top End 2020 ) with 620 kW. The engine has 37,000 working hours. The dredge pump is a 2016 IHC-1100-200-400. Aux power is a Caterpillar 3306 overhauled in 2019. It has 4,000 hrs. Max dredging depth is…
-
12-inch Horizontal Dredge IMS 5012-HP
Built in 2007, the dredge has 6,907 working hours. Self-Propelled with IMS patented Starwheel Drive. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such…
-
8-inch Jet Suction Dredger, Container Shipable, New
The plain suction dredger is a demountable type. The design of the structure is simple, simple and sturdy in construction. The plain suction dredger is designed for efficient operation and easy maintenance. The hull consists of 3 pontoons: the main pontoon and two side pontoons with a simple and quick assembly and disassembly system. A…
-
20-inch Cutter Suction Dredge, IHC 2600
The IHC Beaver 2600 was built in 2002 and is classified with the Italian Register. The dredge has a max dredging depth of 16 m with a 550mm suction and 500mm discharge. Power of the diesel engine for the dredge pump drive is 1566 kW (2130 hp). Power at the cutter shaft at approximately 30…
-
24-inch Cutter Suction Dredger (CSD)
Originally built in 1969 and rebuilt in 2017. The dredger has total power of 4,000 hp. The engine is a Diesel modelo 16-645E marca EMD with 2775 hp and cutter power of 400 hp. Max dredging depth is 16m (52.5-ft) and min depth of 1.5m (4.9-ft). Dredge pump is a HDM 80-28×24-C with suction of…
-
8-inch Horizontal Cutter Dredge Mudcat MC-15
This Mud Cat dredge is ideal for most horizontal auger dredge applications, including agricultural and industrial ponds, marina maintenance, canals, etc. The dredger is powered by a Detroit Diesel 6-71 RC/model 6030N) with 175 hp @1800 RPM. It has a dredging depth of 15-ft. Comes with 250-ft of 10″ fixed HDPE pipe. Location: State of…
-
600 mm Cuter Suction Dredger
Built in 2007 in Korea. The dredger has a capacity of 400m3/h with a dredging depth of 16m. Suction pipe diameter and discharge pipe diameter are 600mm. Main power is a NIIGATA 6L32CLX engine with 2,580hp @ 650 rpm. The generator is a NIIGATA 6L20AX with 750 hp @ 900 rpm. Location: South Korea …
