-
New – 18″ x 18″ Custom Shark Dredge
This 18″ x 18″ CUSTOM SHARK DREDGE MODEL SH-10300-56D-SP has a minimum digging depth of 5′ and maximum of 56′. Overall length (with ladder) of 112′-4″ and a width (with side tanks) of 29′- 11″. Principal Dimensions and Characteristics Overall length (with ladder) 112′-4″ (34m) Overall width (with side tanks) 29′ – 11″ (9.1 m)…
-
CAT 336 Excavator for Mechanical and Hydraulic Dredging
Long reach CAT 336 excavator with clamshell and grapple for mechanical dredging, and a 8″ hydraulic pump for hydraulic dredging. Can dredge up to 45′ underwater. Sold with vessel linked below. Must be purchased with 160 ft. Crew Boat 240807-VO. With purchase of vessel this creates a turnkey dredging system or vessel only for $1,150,000. Price…
-
New – 1984 Ellicott 370 Dragon Cutter Suction Dredger
Built in 1984. Rebuilt pump with low hours. Everything works. Cab and controls need to be rebuilt and modernized. Used for dredging marinas, lakes and rivers, channels, canals, sand mining, more. Location: Northwest, USA Principal Dimensions and Characteristics Discharge Size: 12″ x 10″ All details on these pages are given in good faith and are…
-
Updated Price – 16-inch Cutter Suction Dredge (CSD) IHC Beaver 40
IHC Beaver 40 was built in 2018. Can be dismantled for easy transport. The dredging depth is 8m. The dredge pump is a IHC 900-175-350, single-walled and engine type is Caterpillar C18 TA Acert. Engine power is 483 kW @ 1800 rpm. Cutter type is a IHC Lancelot 955-50 with a diameter of 955 mm.…
-
New – Sinaloa Cutter Suction Dredge
Built in 1980 in the USA. Location: Nicaragua General Information Built By: AMMCO (USA) Year Built: 1980 Flag: Mexico Classification: No Dimensions and Characteristics Length Over All: 35.71 m Beam: 18 m Depth Molded: 1.80 m Dredge Max Dredging Depth: 13.35 m Min Dredging Depth: 2…
-
10-inch Swinging Ladder Dredge w/ Traveling Spud
This listing is for a 10-inch Swinging Ladder Dredge w/ Traveling Spud that was rebuilt in 2012 and 2016. It has a diesel engine that was also rebuilt in 2016, the Traveling Spud is hydraulically operated and it comes with the following additional equipment: 3,000-feet of 12-inch HDPE Pipe 1,000-gallon Fuel Barge Lowe Dredge Tender…
-
8″ Horizontal Cutter Dredge VMI 815
This VMI 815 horizontal cutter dredge built in 2021 has 1,324 hours on it. The dredging system is one truck transportable and comes with a cable drive system. The Cummins Diesel engine has 345hp (257kW). The dredging depth maximum is 15-ft with nominal capacity of 3,000 GPM (11,356 L/min). Pipe, hose, floats, and cable are…
-
New – 10″ Horizontal Auger Dredge
Location: Canada Principal CharacteristicsNew Hydraulic pumpRebuilt Engine 5.9 CumminsRebuilt dredging pump 10″Stainless Steal Ponton All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
-
1985 Mudcat by Ellicott Machine Corp dredge Model 815
1985 Mudcat by Ellicott Machine Corp dredge Model 815. Piping and trailer included. Located in Brown County Ohio East of Cincinnati. Would be a good unit for someone with a pond or marina. Location: State of Ohio, USA
-
4-inch Horizontal Cutter Dredge
Built in 1992 with dual hydraulic pump drive – direct from engine. Dredging debt is 15 ft. Cutter diameter is 16 in. with a width of 8 ft. 6 in. Pump suction and discharge diameters are 4 in. Pump capacity is variable to 1000 GPM @ 130’ Head (Water @ 68 degrees F) @1750 RPM.…
-
24-inch Cutter Suction Dredger (CSD)
Originally built in 1969 and rebuilt in 2017. The dredger has total power of 4,000 hp. The engine is a Diesel modelo 16-645E marca EMD with 2775 hp and cutter power of 400 hp. Max dredging depth is 16m (52.5-ft) and min depth of 1.5m (4.9-ft). Dredge pump is a HDM 80-28×24-C with suction of…
-
18-inch Cutter Suction Dredger
Includes 18-inch Cutter suction Dredger, workboat, house boat, pipes and floaters. Running hours is approximately 18,000 hours. The dredger was built in 2017. It has a length overall of 22.78 m and a breadth of 8.25 m. Draft loaded is 0.84 m. Dry weight is 60 TON. Max. dredging depth is 15 m. Production capacity…
-
850 mm (34-inch) Cutter Suction Dredger
Built in 2011 in China, the dredger has a Classification of CCS Unrestricted Navigation. Total installed power is 13,671 KW. Inboard pumps (2) are IHC HRMD221-36-85 with shaft power of 3626 KW. Dredging depth is 6-28 m and suction and discharge diameters are both 850 mm. Discharge distance is 5-10 km. Cutter is a Bakker…
-
12-inch Horizontal Dredge IMS 7012
IMS model 7012 Horizontal Cutter Dredger built in 2014. Reported to be in good working condition. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge with a dry weight of 47,700 lbs (21,636 kg). Dredging depth is 30-ft using Starwheel Drive System and 32.8 using Cable Drive System. Cutterhead torque is 23,885 in.-lbs. (2,969…
-
750 mm (30-inch) Cutter Suction Dredger (CSD) IHC Beaver 4600
The dredger is a dismountable cutter suction dredger and non-propelled and equipped with an anchor boom installation. The hull consists of six pontoons designed for simple and quick assembly and dismantling. The cutter is driven by slow-running hydraulic motors. The two spuds are each operated by means of a hydraulic ram. All winches are driven…
-
16-inch Cutter Suction Dredge (CSD), AMMCO PD-16-14
Stationary suction dredger with cutter, driven by stilts and banding winches for uniform sweeping. Equipped with cutter scale for effective dredging. The dredging pump has 16″ suction and 14″ discharge, driven by a gearbox with the right ratio by an 700 HP engine of power, 500 HP for the pump and the rest for the…
-
NEW PRICING – 3-inch Remote Controlled Horizontal Dredge, LWT “Pit Hog” BCV-5
LWT Pit Hog Remote Controlled Dredge purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′ with a length overall…
-
12-inch Horizontal Dredge, IMS 7012
The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. This unit is reported to be in very good condition, recently completely reworked. The dredge has been engaged in two projects. Dredging depth with Starwheel Drive is 30-ft and with Cable Drive is…
