-
18/16 Warman Dredge Pump
Rebuilt in 2022 including new housing and new back plate. Impeller 85%. Location: Netherlands
-
160 mm Dragflow HY85 160 HC Submersible Pump (2 Available)
Built in 2018 at Dragflow in Italy. Hydraulic motor. Pump has been used for only 300 hours. Suitable for bentonite water, slurry water, sand-water, salt sand water, etc Can be purchased en-bloc with 200824-PF and 200823-PP Location: Netherlands General Information Built: 2018 / Italy Working Hours: 300 hr Principal Dimensions and Characteristics Weight: 885 kgs…
-
14-inch GIW Pump Impeller
Brand new GIW Impeller 14×36 IN 3M 2C4.5 for a dredge pump. The rotation direction is clockwise from the shaft side. The impeller weights 526.17 kg (1160 lbs). Location: Netherlands
-
18-inch Floating Booster Pump
This 18-inch (457 mm) Booster Pump is mounted on floating pontoons. The pontoons measure 10 m x 6 m. The booster has been used on one job and run around 1500 hours. It is in good working condition and well maintained. The slurry capacity is 3500 m3/hr and has a discharge distance of 2000 m.…
-
18-inch Floating Booster Pump
This 18-inch (457 mm) Booster Pump is mounted on floating pontoons. The pontoons measure 10 m x 6 m. The booster has been used on one job and run around 1500 hours. It is in good working condition and well maintained. The slurry capacity is 3500 m3/hr and has a discharge distance of 2000 m.…
-
10-inch Booster Pump
This 10-inch (254mm), 600 hp Booster Pump. The pump is skid mounted and has 2,000 hours. The engine and gearbox are in good condition. Pump is in very good condition. Location: Portugal Principal Dimensions and Characteristics Year Built: 2015 Transportation dimensions Length: 6 m x 2 19.7-ft x 2 …
