-
3300 PSI 25 GPM Hydraulic Power Unit (HPU)
This HPU is driven by a Tier 4 Certified JCB Engine. Operating pressure 1200-3300 PSI with a hydraulic flow of 0-52 GPM. Hydraulic tank and diesel tank are both 120 gallons. 4″ x 10″ box tube skid rails & 10″ forklift boots. Fully boxed frame tubing for added protection Location: State of South Carolina, USA…
-
4-inch Diesel Booster Pump 118-hp
The 4-inch Diesel Booster Pump has a 118-hp John Deere Engine. It has a 96 gallon fuel cell. The engine has liquid cooled, 12 Volt Power-in-Line 4 cycle Turbo Charge. The Pump has a min flow of 250 GPM and max flow of 1200 GPM. Discharge size is 4-in and suction size is 6-in. Solid…
-
4-inch Diesel Booster Pump 118-hp
The 4-inch Diesel Booster Pump has a 118-hp John Deere Engine. It has 96 gallon fuel cell. The engine has liquid cooled, 12 Volt Power-in-Line 4 cycle Turbo Charge. The Pump has a min flow of 250 GPM and max flow of 1200 GPM. Discharge size is 4-in and suction size is 6-in. Solid handling…
-
10-inch Ellicott 370 Pump w/ Reducer Complete
This 10-inch Ellicott 370 Pump was built in 2009. It is a complete pump and transmission (bearing housing and shaft). The the impeller and shell have about 60% life remaining. The dry end has been refurbished, and is in good condition. The transmission has new bearings, seals and a cooler. Location: Georgia Principal Dimensions and…
-
27 x 24 x 68-inch Booster Pump with twin Cat 399 power
This is a 27 x 24 x 68-inch Booster Pump with twin Cat 399 engines that are rebuilt, one only has 191 hours. The Ellicott pump made by Mobile Pulley is a complete new pump and has never been used. It is skid mounted and the skid breaks in half so the booster can be…
-
6 x 8-inch Booster Pump
This is a 6 x 8-inch Booster Pump with a Detroit Inline 6 diesel engine. Located in the state of Louisiana, USA Principal Dimensions and Characteristics Type: Booster Pump Make/Model: Furukawa Slurry / LFK004 pump Discharge Diameter: 152.4 mm 6 inches Suction Diameter: 203.2 mm 8 inches Weight: 10,000…
-
Dredge Cutter Head w/ 71-inch (1,803 mm) ID Black Ring
Cutter head includes 8 complete extra sets of replaceable cutter edges. The cutter head edges have casting #A6337 and #A6338. New York, USA All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied.…
-
SOLD – 10 x 8-inch Booster Pump w/Mack Engine
This listing is for a Lightning XL booster pump with a Mack 6 cylinder engine. The impeller is worn out. Pump recently painted. Location: state of Texas, USA Principal Dimensions and Characteristics Pump Make/Model: Lightning XL Discharge Diameter: 203.2 mm 8 inches Suction Diameter: 254 mm 10 inches Engine Make / Model: Mack 6 cylinder…
-
Sold: Metso J36 12″ x 12″ Pump
Metso J36 12″ x 12″ Pump Location: State of Nebraska, USA
-
Not Available – 16-inch Maddox Booster Pump w/ Detroit 16V92TI Prime Mover
This is a 16 x 16-inch Maddox Booster Pump with a 16V92TI Detroit Diesel engine, driven through a Falk Gear Box. Booster is in good condition. Location: state of Florida, USA Pump Dimensions and Characteristics Type: Booster Pump Make/Model: Maddox / 16X16X36 Discharge Diameter: 406.4 mm 16 inches Suction Diameter: 406.4…
-
Sold: 10-inch Booster Pump with Automation Package
The 10-inch booster pump is designed with centrifugal singles suction volute having a 12 inch diameter suction and is arranged for 10-inch inside diameter suction pipe. The 10-inch pump is mounted on a steel base. It is powered by a John Deere 6090 diesel engine rated at 325bhp @2200RPM.. The dredge pump is a GIW…
-
Sold: Excavator Pump Attachment 6-inch Eddy Pumps
Non-clog design dredge/booster pump for high solids industrial pumping applications. Min flow of 450 gal/min and a max flow of 2000 gal/min. Has a capacity of 150-200 yd3/hr. Only used on one job. Very low hours and in excellent condition. Location: State of California, USA Dimensions and Characteristics Length: 113-in 2.87 m Height: 37-in 0.94…
-
Sold: Excavator Pump Attachment 10-inch Eddy Pumps
Non-clog design for high solids industrial pumping applications. Min flow of 1200 gal/min and a max flow of 5000 gal/min. Has a capacity of 300-350 yd3/hr. Only used on one job. Very low hours and in excellent condition. The attachment is currently set up for a Komatsu 400 excavator. Requires a separate Hydraulic Power Unit…
-
SOLD: 6-inch Dredge Pump, hydraulic driven.
Innovative Material Systems CDH100C dredge pump, Hours: 1,132 on meter, Serial: 1024, Cummins 4BT, Fuel type: Diesel, Inlet/discharge diameter: 6″, (2) pumps, Hydraulic driven, (7) suction pipes, (1) 10′ L, (3) 8′ L, (3) 3′ L, Trailer, 16′ L x 84″ W, Suspension: Spring, Axles: Tandem, Tire size: ST205/75R15, good condition. Location: State of Kansas,…
-
SOLD: 14-inch Cutterhead Module with Cutterhead and 65 hp drive
Dredge works 65 HP cutter drive with pump and end ladder. The cutterhead has a 14-inch suction. Location: State of Nebraska, USA
-
SOLD: 12-inch Booster Pump
This 12-inch (305) mm, 715 hp Booster Pump was built in 2002. The pump is skid mounted and has 1,500 LOW hours with oil samples. The booster is diesel powered and V-belt driven. Location: State of Illinois, USA Principal Dimensions and Characteristics Year Built: 2002 Pump: Model/Make: Metso/L40 Discharge Diameter: 305 mm 12 inches Suction…
-
Not Available: 16-inch Maddox Booster Pump
16” Maddox booster pump powered by Detroit diesel 12v92T with a twin disc PTO driving a Falk gear box . Pump is a Maddox 16x16x43. Booster is being sold as is where is. Location: State of Florida, USA Our inventory changes weekly. If you don’t see what you’re looking for please give us a call…
-
SOLD: 500 hp Dredge Cutterhead Module For 22-inch Dredge
48-inch Cutter Basket with 500hp hydraulic gearbox. Assembly came off a 22 inch dredge. Location: State of Florida, USA Dimensions and Characteristics Cutter Diameter: 1219 mm 48-inch Hydraulic Gearbox: 373 kW 500 hp Our inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225)…
