-
Sold – 17 m, 471 kW Transport Vessel/Landing Craft
Powered by 2 GUASCOR engines, the transport vessel/landing craft has total power of 471 kW (631 hp) at 1800 rpm. The vessel is 17 m in length and 4.2 m breadth. It was built in 1982 and has been reconditioned. The vessel is reported to has 200 hours of use. Location: Portugal General Year…
-
Not Available – 16-tonne Floating Crane and Grab Dredger
Floating Crane built in 1989 with major repair to engines in 2021. The barge was built in 1990. Registered as Germany (ZSUK)”Unionszeugnis” gültig bis 27.10.2025. The barge is 32.0 m in length, 14.30 in width and has a depth of 3.0 m. Overall height is 9.20 m.The cranes is a Weserhütte W320 Caterpillar 6TB00262 215kW…
-
Sold – 54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat
Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a…
-
SOLD: 130′ x 50′ x 12′ Spud Barge, not documented
The vessel is of all welded steel construction with a raked bow, square stern and cambered deck with a concrete pad down the center. There are six (6) compartments: (2 rakes and 4 main body compartments) and four (4) spud wells. All compartments sighted are separated by transverse and longitudinal watertight bulkheads. There are 3…
-
SOLD: 7905 DWT Ballastable Barge for Charter
Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…
-
Sold – Loader Barge with Barko Crane
Loader barge with 1987 Barko 160A TRK Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 2022 Suzuki 150hp In-line 4 Stroke Outboard Ballast Tanks: 2 Pontoons: with Hydraulic Spud Wells and Spuds Crane Information Model: 1987 Barko 160A TRK Crane Orange Peel Grapple Rotex Turntable Reach: 27′ Engine: GM 353 Our inventory changes weekly. If…
-
Sold – 57 m Hold Barge, 1135 DWT
Hold barge built in 1970 with certification that expires November 2024. The barge has a length of 57.38 m, width of 8.8 m and depth of 3.52 m. Available for sale or charter Location: Netherlands General Information Built: 1970 Certification: Expires November 2024 Dimensions and Characteristics Length Over All: 57.38 m 188.3-ft…
-
Sold – 45-foot Twin Propeller Airboat w/ Knuckleboom Crane
This is a 2,400 quad-engine airboat with a 30-knot cruising speed. There is a 10,000 pound deck mounted knuckleboom crane with basket, and a 13,000 pound hydraulic bow winch. Located in the state of Texas, USA Principal Dimensions and Characteristics Length Over All: 45-feet 13.72 m Beam: 16-feet…
-
SOLD: 300-tonne Floating Revolving Crane
The 300-tonnes barge has a storage area of 12m x 12m. Length of the barge is 36m, breadth is 16m and depth is 4m. The crane is an American-Hoist 300 T with a maximum lift capacity of 65 T at 13 m. Barge equipment includes 2×12 T hydraulic winches + hydraulic power pack , 2…
-
Not Available: 20-inch Booster Barge
This listing is for a 20-inch Booster Barge that was built in Holland by IHC. It was last run about one year ago. Location: Adriatic Sea Principal Dimensions and Characteristics Pump: Make/Model: Royal IHC (Holland) type 128,5-22,5-45 Discharge Diameter: 500 mm 20 inches Suction Diameter: 500 mm 20…
-
SOLD: 1120 DWT Cargo Landing Craft
1120 DWT Cargo Landing Craft, Built 2013. Owners just completed extensive refit including full engine room overhaul. Location: Eastern Mediterranean Price: Available upon request Dimensions Year Built / Place: 2013 / Turkey Class: TL (IACS) Length: 80.0 m Beam: 16.10 m Depth: 3.50 m Max Loaded…
