-
49.6 m x 19.5 m x 4.3 m Flat Top Barge, 1,800-tonne Dead Weight (for charter)
Available for charter. Built in 1977 in Italy the barge is non-self-propelled. Class is RINA International 20 nm Offshore. 49.6 m x 19.5 m x 4.3 m Flat Top Barge has a GT to 1080 tons. Free space for loading: complete – bollards under deck. Authorized RoRo embarkment: by ramp drivable capacity T90 – per…
-
Twin 290-man Accommodations Barges
Year built 2009. The barge is 76.16 m (250-ft) in length and has a beam of 17.76 m (58-ft). Maximum draft is 3.0 m (9.84-ft). It has a fresh water capacity of 170 m3, fuel oil capacity of 80 m3 and sewage waste capacity of 580 m3. Equipment include (2) 800 kW CAT generator, (2)…
-
36 ft. x 12.5 ft. Work Spud Barges (2)
2 work barges. One is 36-inches in height and the other 42-inches. Both barges are 35-ft in length and 12.5-ft in width. Both barges also have 2 spuds. Both of these barges have recently been blasted, painted, re-decked where necessary new manhole were renewed as required. Price is for each barge.Location: State of Texas, USA…
-
Sold – M33 Deck Barge With A-Frame
M33 Deck barge in good condition and ready to work. This barge is part of a package deal with the M36 deck barge linked below. 35′ x 12.6″ x 36″ A-Frame (not pictured) Package Deal; M36 deck barge with spuds M33 deck barge with A frame Location: Louisiana Our barge inventory changes weekly. If you…
-
Sold – 30′ Raked Bow Work Barge
30’x12’x3′ Work barge, built in 2022 by Barge Worx. Location: Louisiana 30x12x3 Raked Bow Barge with following features 1/4″ Plate, 2x2x1/4 framing on 24″ centers, 4 cleats, Flush water-tight manway, 2 coat exterior epoxy paint Dual engine brackets with underdeck rigging pipe and Aluminum console 8″ internal spudwells 6″ spuds 20ft long with hats and…
-
Sold – 17 m, 471 kW Transport Vessel/Landing Craft
Powered by 2 GUASCOR engines, the transport vessel/landing craft has total power of 471 kW (631 hp) at 1800 rpm. The vessel is 17 m in length and 4.2 m breadth. It was built in 1982 and has been reconditioned. The vessel is reported to has 200 hours of use. Location: Portugal General Year…
-
Not Available – 16-tonne Floating Crane and Grab Dredger
Floating Crane built in 1989 with major repair to engines in 2021. The barge was built in 1990. Registered as Germany (ZSUK)”Unionszeugnis” gültig bis 27.10.2025. The barge is 32.0 m in length, 14.30 in width and has a depth of 3.0 m. Overall height is 9.20 m.The cranes is a Weserhütte W320 Caterpillar 6TB00262 215kW…
-
Sold – 54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat
Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a…
-
SOLD: 130′ x 50′ x 12′ Spud Barge, not documented
The vessel is of all welded steel construction with a raked bow, square stern and cambered deck with a concrete pad down the center. There are six (6) compartments: (2 rakes and 4 main body compartments) and four (4) spud wells. All compartments sighted are separated by transverse and longitudinal watertight bulkheads. There are 3…
-
SOLD: 7905 DWT Ballastable Barge for Charter
Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…
-
SOLD: 45m x 12m x 3 m Spud Deck Barge (Spud pontoon)
The deck barge was built in 1975 in the Netherlands. Spuds and equipment were built in 1988-89. The classification is Buerau Veritas (“Deep Sea”) but has been discontinued. There are 3 spuds each 14m in length that are rope driven. The barge length is 45m, width is 12 m and height is 3 m. Location:…
-
SOLD: 91.5 x 27.5 x 5.5 m DWT 8579
Heavy deck cargo barge has an area of 2503 m2 with a max. deck load of 8T/m2. Void tank area is 12,641 m3. The barge was built in 1994 in Singapore and has a class of NV-GL, +1A1 Barge, Ocean Going. Location: Greece General Built Year / Place: 1994…
-
Sold – Loader Barge with Barko Crane
Loader barge with 1987 Barko 160A TRK Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 2022 Suzuki 150hp In-line 4 Stroke Outboard Ballast Tanks: 2 Pontoons: with Hydraulic Spud Wells and Spuds Crane Information Model: 1987 Barko 160A TRK Crane Orange Peel Grapple Rotex Turntable Reach: 27′ Engine: GM 353 Our inventory changes weekly. If…
-
Currently Chartered – 2430 ton Flattop Barge For Sale or Charter
Barge Info 2430 ton flattop barge for sale or charter, located in Northern Europe. Her latest dry dock was in 2023. Loading capacity is about 2400 metric tons. This can be increased if recalculating freeboard (today about 1 meter summer freeboard). When towing the barge in open sea, it is towed backwards due to the…
-
Sold – Flattop Barge
Flattop Barge for sale or charter. Direct from owners. Location: Northern Europe Spud legs 2x10m – possible to extend extra 10 or 8m. 70% new bottom, some deck plates, some stiffeners and partly bulkheads account to class (PRS IACS member) requirements renewed in shipyard 08 2024. Hydraulic system overhauled, new hoses installed. Quick Overview Vessel…
-
Sold – 45-foot Twin Propeller Airboat w/ Knuckleboom Crane
This is a 2,400 quad-engine airboat with a 30-knot cruising speed. There is a 10,000 pound deck mounted knuckleboom crane with basket, and a 13,000 pound hydraulic bow winch. Located in the state of Texas, USA Principal Dimensions and Characteristics Length Over All: 45-feet 13.72 m Beam: 16-feet…
-
SOLD: Dock Barge with 7543 Tiger Crane
Dock / deck barge with 7543 Tiger Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 115 Yamaha Outboard Crane Information Model: 7543 Tiger Crane with Power Pack Elevated Helm Hydraulic Cat Head 2 Spuds Our deck barge inventory changes weekly. If you don’t see what you’re looking for, please call +1 (281) 248-8158 or email…
-
SOLD: 300-tonne Floating Revolving Crane
The 300-tonnes barge has a storage area of 12m x 12m. Length of the barge is 36m, breadth is 16m and depth is 4m. The crane is an American-Hoist 300 T with a maximum lift capacity of 65 T at 13 m. Barge equipment includes 2×12 T hydraulic winches + hydraulic power pack , 2…
