-
128 m3 New Non-Propelled Split Hopper Barge
New Barge – Just used for testing. Built in 2020. The 128 m3 hopper capacity has a load capacity of 150 tons. Barge opening system is with hydraulic actuators – Iveco diesel hydraulic unit new with 150hp. Length is 24.146 m and width is 7.520 m. Location: Northern Europe General Built: 2020 Dimensions and…
-
950 m3 Self-Propelled Split Hopper Barge w/ 6.5 m3 Grab
This 950 m3 Self-Propelled Split Hopper Barge w/ 6.5 m3 Grab was built in 2006 and the Classification Society is Inspeccion de Buques de la Direccion General de la Marina Mercante (Spanish Local Class). The vessel was last dry docked in the summer of 2015 for approx. 80/90 days in Spain. New navigation equipment was…
-
50-tonne Modular Jack Up Barge
15 m x 12 m x 1.5 m dismountable jack up barge. Movable using 5 trucks (3 x 40-ft and 2 x 60-ft). Spuds are 20 m in length and wall thickness of 20 mm. The barge has a deck load of 15 t/m2 and a deck lifting capacity of 50 tonnes. Location: Ireland Principal…
-
80-tonne Modular Jack Up Barge
18 m x 12 m dismountable jack up barge. Movable using 10 trucks (8 x 40-ft and 2 x 60-ft). Spuds are 18 m in length and wall thickness of 25 mm. The barge has a deck load of 15 t/m2 and a deck lifting capacity of 80 tonnes. Location: Ireland Principal Dimensions and Characteristics…
-
54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat
Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a…
-
45m x 12m x 3 m Spud Deck Barge (Spud pontoon)
The deck barge was built in 1975 in the Netherlands. Spuds and equipment were built in 1988-89. The classification is Buerau Veritas (“Deep Sea”) but has been discontinued. There are 3 spuds each 14m in length that are rope driven. The barge length is 45m, width is 12 m and height is 3 m. Location:…
-
36-feet x 12.5-feet Work Spud Barges (2)
2 work barges. One is 36-inches in height and the other 42-inches. Both barges are 35-ft in length and 12.5-ft in width. Both barges also have 2 spuds. Both of these barges have recently been blasted, painted , redecked where necessary new manhole were renewed as required. Price is for each barge.Location: State of Texas,…
-
91.5 x 27.5 x 5.5 m DWT 8579
Heavy deck cargo barge has an area of 2503 m2 with a max. deck load of 8T/m2. Void tank area is 12,641 m3. The barge was built in 1994 in Singapore and has a class of NV-GL, +1A1 Barge, Ocean Going. Location: Greece General Built Year / Place: 1994…
-
330-Person Accommodations Barge
Built in 2009 in Korea, the barge flag is Marshall Island and Classification and Notation is ABS + A1 Barge. The barge is 100m (328-ft) in length and has a breadth of 30.50m (100-ft). Clear deck area is 1,335 m2. Lift equipment includes a 68 tons @ 6.8 m radius main hoist, a 11 tons…
-
61.44 x 16.17 x 3.85 m Deck Barge DWT 2000
Max deck load of 12 T/m2. Barge has 10 ballast tanks and 2 ballast pumps and 6 ballast main pipe lines. Ballast tanks are hard coated. New build 2020 in Turkey and has a Class of RINA. The barge NT is 264T and GT of 882T. Location: East Mediterranean General Built Year / Place: 2020…
-
SOLD: 7905 DWT Ballastable Barge for Charter
Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…
-
610-tonne Payload Jack-Up Barge for Charter
This 42 x 23.5 Jack-Up barge has available deck area of 800 m2 and a deck load of 10T/m2. The barge has 4 x 37.5 m spuds. Maximum elevated height is 26.6 m. The barge was built in 1999, it’s flag is St Vincent & The Grenadines. Class Society and Notation is BV I Hull…
-
1700 m3 Self-Propelled Split Hopper Barge
This barge has a class INSB with a navigation area of Trips Coastal, 20 NM of shore. The barge is 74.35 m (244.5-ft) in length, with a beam of 14.0 m (50-ft) and depth of 4.5 m (14.8-ft). Deadweight 3000T. The barge is powered by 2 X JINAN, G6190 with 540 kW @ 1450RPM. The…
-
80 m x 20 x 4 m – Ballasted Deck Barge
Built in 1998 in Denmark, the deck barge has a surface load of 15 T/m2 or bogie load of 32.0 T. Ballast water capacity is 8615,5 T with ballast pump capacity of 2 x 600 m3/h. Location: East Mediterranean General Built Year: 1998, Denmark Principal Dimensions …
-
200-tonne Ravestein Jack Up Barge
The platform consists of multiple pontoons (16 units), each with outer measurements of a standard 40’ sea-container. The two outer pontoons are each with two legs wells and connections lugs for the hydraulic lifting system. The lifting system mainly consists of four legs, four removable hydraulic lifting systems, a power system and a control panel.…
-
20-inch Booster Barge
This listing is for a 20-inch Booster Barge that was built in Holland by IHC. It was last run about one year ago. Location: Adriatic Sea Principal Dimensions and Characteristics Pump: Make/Model: Royal IHC (Holland) type 128,5-22,5-45 Discharge Diameter: 500 mm 20 inches Suction Diameter: 500 mm 20…
-
400-tonne Payload Jack Up Barge
This jack-up barge is fully modular, and can be disassembled for transport by truck, rail, or ship. Each module is the size of a standard ISO shipping container, which greatly reduces the cost of transportation. The barge is classed for operation in up to 30 m water depth. Similar to File 170203-BJ except it is…
-
500 m3 Self Propelled Split Hopper Barge
This 500 m3 Self Propelled Split Hopper Barge was built in 1989. Located in Eastern Mediterranean Principal Dimensions and Characteristics Year Built: 1985 Hull Material: Steel Length Over All: 50.30 m 165 feet Beam: 12.00 m 39 feet Draft: 3.00 m 10 feet GRT/NRT: 477 / 381.6 …
