-
1000 hp Twin Screw Anchor Boat
Built in 1973 in Japan. The anchor boat is powered by 2 Yanmar 6M-UT (4-valve) engines with 500 hp each and has 2 set x Screw Propeller. The length of the boat is 22.59 m (74.11-ft), breadth is 8.0 m (26.25-ft and has a depth of 2.5 m (8.2-ft). Location: West Mediterranean Sea …
-
26.6 m Survey and Salvage Boat
Class is currently MCA Cat 2 60 nm Offshore but could be changed to Cat1, up to 150 nm offshore. It is equipped with bow thrusters. It has a reverse osmosis plant, full catering facilities and a full compliment of electronics equipment including Inmarsat. On deck it has a HIAB, survey winch A-Frame and diving…
-
45-foot Twin Propeller Airboat w/ Knuckleboom Crane
This is a 2,400 quad-engine airboat with a 30-knot cruising speed. There is a 10,000 pound deck mounted knuckleboom crane with basket, and a 13,000 pound hydraulic bow winch. Located in the state of Texas, USA Principal Dimensions and Characteristics Length Over All: 45-feet 13.72 m Beam: 16-feet…
-
1360 hp Crew Boat Wind Farm Vessel
Built in 2012 and refitted in 2017, this Crew Boat / Wind Farm Vessel has 2 Caterpillar engines with total power of 1360 hp. It’s maximum speed is 25 knots and cruising speed is 22 knots. It has seating for 3 crew members and 12 passengers. It’s Class Society and Notation is MCA Cat2 –…
-
1,658 2014 Multi Purpose Work Boat
This 1,658 2014 Multi Purpose Work Boat was built in 2014 in Spain and its Classification Society and Notation is RINA (Registro Italiano Navale), Unrestricted – C TUG-AUT–UMS. Its next Dry Docking is due in October, 2016, its next Special Survey is due in October, 2019 and the next Annual Survey is due in October,…
-
Sold – 19m Steel Workboat For Sale
19m workboat with steel hull. Built in Egypt in 2024. Located in the Eastern Mediterranean. Two engines new 0 hours, Two generators new 0 HOURS, 50 KW EACH ONE PROPELLERS 98 CM EACH ONE, SHAFT 90 MM. Engines controlled from bridge and full alarm system in engine room (8 CAMERAS). GEARBOX ADVANCE 300 RATIO 3:1…
-
SOLD: 1,070 hp Triple Screw Multicat Type Work Boat
This listing is for a 1,070 hp Triple Screw Multicat Type Work Boat w/ 25-tonne Deck Crane was built in Turkey in 2012 and was renovated in 2018. Its’ Classification Society and Notation is PHRS (Phoenix Register of Shipping). Its’ next Dry Docking and Special Survey is scheduled for January of 2020. Flag: Turkey Location:…
-
SOLD: 546 hp Twin Screw Workboat w/ A-frame Hoist
Multicat workboat built in 2014 in Egypt. Class BV Coastal 20 nm offshore. Powered by 2 x Caterpillar 3406 6 cyl with total power of 546 hp. The workboat is 24.0 m in length and has a breadth of 8.0 m. Free deck space is 96 m2. It has an Hydraulic Crane with 4.5 tons…
-
SOLD: 4,800 hp Offshore Anchor Handling Supply Tug
This 4,800 hp Offshore Anchor Handling Supply Tug was built in France in 1979 and its Classification Society and Notation is BV (Bureau Veritas) Unrestricted Deep Sea Tug. It’s next Special Survey is due in July, 2018 and its next Annual Survey is due in October, 2016. Flag: Malta Located in East Mediterranean Principal…
-
SOLD: 500 hp Outboard Semi Rigid Zodiac 7530B
This Vessel was built in 2008 in Canada and its Class Notation is Cargo ship 3 rd cat (Division FR222), BV approved vessel with deep V and low center of gravity. Flag: French Located in Europe Principal Dimensions and Characteristics Year Built: 2008 Class Notation: Cargo ship 3 rd cat (Division FR222), BV approved…
-
SOLD: 220 hp Single Screw Multipurpose Work Boat
This 220 hp Single Screw Multipurpose Work Boat was built in 2008 in the Netherlands and its Classification Society is Local Dutch Ship Insp. Class. Its last Dry Docking was in March, 2013, it has new propeller, painting and new wire on spud poles and the next is due in March, 2017. Its next Annual…
-
SOLD: 660 hp Multi Purpose Survey Research Standby Vessel
This Vessel was built to LLOYD’s rules in 1968 in the UK with major conversions in 1988 and 2009 and its Classification Society/Notation is Class DTp VIII (MCA). The autopilot has been upgraded to a 921G with XTE resolution of 1.85m, i.e. autopilot. The unit has been set up for ‘plug & play’ input of…
-
SOLD: 225 hp Road Transportable Multi Purpose Work Boat
This Multi Purpose Work Boat is a new build and it Class will be Local Ship Inspectorate Class (registered as small work boat). The vessel is road transportable, there is no generator all the equipment is run on the main engine. The vessel is powerful and has an extreme short turning point. It could be…
-
Sold – 710 hp, 17m Multicat
Built in 1991 and rebuilt in 2009, the Multicat was in dry dock June 2023 for maintenance wash down, replace damaged fenders, new antifouling. Owner also getting a new general arrangement, tank plan, line plan, structural drawings and new stability book. The vessel is powered by 2 x Baudouin 6 M16 (2018) with power output…
-
Sold – 25.43m Fishing Autoliner
25.43m (83 ft.) fishing autoliner is now available for sale. It could be put under BV Class at an extra cost. Vessel was re-built in 2005: The vessel was shelter decked (aluminium),heeling correction tanks, sandblasted and hot galvanized in Poland. In 2015 it was lengthened (4,5 meters). Anti-rolling tank installedIn April 2022 the vessel will…
-
Not Available – 20,60 m Pusher
20,60 m. Pusher available for sale. Engine had major repair work done in 2018. Location: Germany Quick Overview Vessel Type: Pusher Registry: Germany (ZSUK) – Unionszeugnis Year of Build: 1973 Shipyard (Pontoon): Hilgers AG, Rheinbrohl, Germany Length: 20,60 m Width: 6,82 m Draft: 1,76 m Main Engine: Schottel SRP 150 DB OM424A (12 Cylinder) /…
-
SOLD: 33 ft. Aluminum Flat Deck Work Boat
33 ft. aluminum work boat for sale, located in the southern United States. In good condition. Location: Florida Renovated in 2022 with new twin 250 hp Suzuki outboards (July 2022) New air conditioning New generator New paint New radio New Garmin New Blue Fin trailer Sept 2023 Large flat back deck Air conditioned cabin Our…
-
Not Available: 1,700 hp Twin Screw Offshore Supply Vessel (OSV)
Twin Diesel Caterpillar c32 engines with 1,700 hp with a deck area of 340 m2 (34.6 x 9.81 m), GT of 624 and NT of 187. Cruising speed is 9 knots and towing speed of 4-6 knots with a bollard pull of 17 tons.. The vessel has a Link Belt Modela HSP-8040 Hydraulic Telescope Crane…
