-
2012 hp Single Screw Towing Tug
Built in 1983, in the Italy. The tug has a steel hull and is classed NSB Tug or AH 100AE. It is powered by a Wartsila NOHAB DIESEL with 2012 hp. Cruising speed is 10 knots. Length is 25.05 m, breadth is 24.36 m and depth is 4.0 m. Location: South Europe General Information Built:…
-
710 hp, 17m Multicat
Built in 1991 and rebuilt in 2009, the Multicat was in dry dock June 2023 for maintenance wash down, replace damaged fenders, new antifouling. Owner also getting a new general arrangement, tank plan, line plan, structural drawings and new stability book. The vessel is powered by 2 x Baudouin 6 M16 (2018) with power output…
-
4 m3 Grab Bucket Dredger w/ Liebherr HS 853 45-tonne Crane
Liebherr HS 853 HD excavator powered by V 8 cylinder diesel engine with a power rating of 400kW @ 1900 rpm. The crane has a max boom length of 29.0 m and min length of 11.0 m. Max capacity is 5.1 T @ 28.0 m reach. Bucket capacity is 4.0 m3. The barge is 28.0…
-
1650 hp Single Screw Towing Tug
Built in 1977, re-engined in 2000, the single screw tug is classed MCA Cat 2. The tug has a length of 25.28 m, breadth of 8.26 m and depth of 3.8 m. Bollard pull is 19 tonnes. Ballast capacity is 53 m3 The tug is powered by 1 x Caterpillar 35-1 @ 1800 RPM with…
-
Amphibious Combination Dredger / Twin Sisters Available
Classified for inland water use only. Equipment is suitable for use on land and in water. One vessel has operated for up to 400 working hours and the 2nd is new. The Vessel has a dredging depth of 6 m and a bucket size of 0.8 m3. Sand pump output diameter is 200 mm and…
-
294 hp Single Screw Work Boat
Built in 1969 and in 2016 was rebuilt with 600,000 euros of improvements. The vessel has a free deck area of 72 m2 (86 yd2) and hopper cargo area of 600 tons. Next Dry dock is October 2020 and next Annual Survey is October 2019. It has a Classification of Local Ship Inspectorate Harbor. Flag:…
-
10-inch Booster Pump
This 10-inch (254mm), 600 hp Booster Pump. The pump is skid mounted and has 2,000 hours. The engine and gearbox are in good condition. Pump is in very good condition. Location: Portugal Principal Dimensions and Characteristics Year Built: 2015 Transportation dimensions Length: 6 m x 2 19.7-ft x 2 …
-
73.6 kW Utility Tug
Built in 1996 in the Netherlands, this tug has 1,000 hours of use. It has 73.6 kW @3000 RPM. It is 7340 mm in length and weights 5000 kg. Location: Portugal General Year Built/Location: 1996 / Netherlands Hours of Use: 1,000 h Dimensions and Characteristics Length Over All: 7.34 m 24.1-feet …
-
Excavator Dredge Based on P-944 Excavator
Pontoon F 600 with Pontoon Excavator P 944. Excavator has 2 buckets – 5.6m3 and 2.1 Pontoon length is 22.0 m (72-ft), width of 7,48 m (24.5-ft) and max flotation depth of 1,10 m (26-inches). Spuds has a length of 8.5 m (28-ft) however there is a 2m bolt in section that extends the spud…
-
20-inch Cutter Suction Dredge, IHC 2600
The IHC Beaver 2600 was built in 2002 and is classified with the Italian Register. The dredge has a max dredging depth of 16 m with a 550mm suction and 500mm discharge. Power of the diesel engine for the dredge pump drive is 1566 kW (2130 hp). Power at the cutter shaft at approximately 30…