-
450 m3 Grab Bucket Loading Split Hopper Dredger
Built 1984 in France the 450 m3 split hopper dredger has a maximum dredging depth of 20 m (65.62-feet). The crane is a Liebherr Type B16/14-16VG with a 6.4 m3 bucket. It is powered by 2 Baudouin engines with total power of 1059 kw. Length is 52.5m, beam is 12.0m and has a draft of…
-
Not Available: Bucket Wheel Dredger and matching Hopper Barge Set
Available for charter or sale. The dredger has a dredging depth of 18m and can be extended to 24m. Bucket capacity is 775lt. The output rate is 750 m3/h. It is powered by 2 engines both full overhauled in 2021. The dredger has a length of 80.17m, a breadth of 14.42m and a depth of…
-
18-inch Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
-
6 m3 Grab Bucket Dredger w/ Mitsubishi 8DC-61C Crane
6 m3 Grab Bucket Dredger was built in 1988. The dredge has a length of 33.62 m, a breadth of 16.0 m and depth of 2.50 m. The crane is a P & H FD600 with a capacity of 85 tons. Boom length is 32.0 m. Dredging capacity is 480 m3/h. The main engine is…
-
8 m3 Mitsubishi Clamshell Dredge With 25-tonne drop hammer
Dredge was built in 1988 in Japan and last went into docking for repair in 2019. The crane is a SKK 80 ton with a 38m boom length. Dredging depth (under water) is 50 m. The sand bucket has a capacity of 8m3 with a load of 20 tons. The heavy bucket has a capacity…
-
750 m3 Per Hour Bucket Ladder Dredger
This Chain Ladder Dredger was built in 1975 in Germany. It has a capacity of 750 m3/h. It is classified as RRR (Russian River Register) KM*L2 R3-AUT2 EPP Dredger and can navigate 200 miles from shore. Location: North-West Russia General Year Built / Where Built: 1975 / Germany …
-
2,300 m3 Crane Loading Split Hopper Dredger
Approx. 2300 m3 split hopper dredge. The dredge has a Liebherr HS895HD crane with 200 T lift capacity with arm of 41 m that can operate up to a max depth of 22 m (can be increased up to 50 m). The crane is fitted with 2 hydraulic grabs : one grab with a capacity…
-
4700 m3 Trailing Suction Hopper Dredger w/Rainbowing
Built in 1986 by IHC Holland in The Netherlands, the Trailing Suction Hopper Dredger has a class notation of Russian Maritime Register of Shipping. The dredger has 2 x 810 kW IHC HOLLAND, electric dredge pumps each with a suction diameter of 700 mm (28-inch). The hopper capacity is 4700 m3 (6,147 yd3) and can…
-
337 Bobcat Excavator mounted on Amphibious Undercarriage
This 337 Bobcat Excavator mounted on Amphibious Undercarriage was built in 2009 and currently has 5,274 runtime hours. The undercarriage is constructed of Corten steel with coal tar paint on the outside and inside of the pontoons. It has stainless steel inspection plugs, hydraulic lines and cylinders. It is also equipped with keyless ignition and…
-
8-inch Rebuilt Cutter Suction Dredger (CSD)
This 8-inch Rebuilt Cutter Suction Dredger (CSD) was completely overhauled in 2014. The dredger is compact, easy to transport and capable of a wide range of activities like maintenance dredging, sand winning and gravel winning. By means of the extensive renovation a KISS (keep it simple sir) type modern dredger is created by the former…
-
950 m3 Self-Propelled Split Hopper Barge w/ 6.5 m3 Grab
This 950 m3 Self-Propelled Split Hopper Barge w/ 6.5 m3 Grab was built in 2006 and the Classification Society is Inspeccion de Buques de la Direccion General de la Marina Mercante (Spanish Local Class). The vessel was last dry docked in the summer of 2015 for approx. 80/90 days in Spain. New navigation equipment was…
-
2.25 m3 55-tonne Grab Dredger
This Non-Propelled 2.25 m3, 55-tonne Grab Dredger was built in 2001. Location: Greece Principal Dimensions and Characteristics Year Built: 2001 Length Over All: 34 m 112 feet Beam: 16 m 52 feet Registered Depth: 2.85 m 9 feet Max. Load on Deck: 5,466 kg/m2 GRT / NRT: 534 /…
-
SOLD: 8-inch Swinging Ladder Dredge Ellicott 360 “Dragon”
Built in 2012 with total hours on dredge of 7,000. Powered by a 375 hp John Deere Motor with 1,000 runtime hours. Dredge Pump is an 8-inch Metso pump (new) with suction diameter of 8-in and discharge diameter of 8-in. Cutter diameter id 31.5-in.. Pump capacity of up to 2,500 gallons “GPM” Location: State of…
-
SOLD: 7316 m3 Trailing Suction Hopper Dredge (TSHD)
Built in 2021 in China, the TSHD has 2 sets x 8000cbm inboard dredging pumps. Max dredging depth is 36 m. Hopper capacity is 7310cbm. Dredger main engines are 2 x DN8330ZC engines with 3310kw each with cruising speeds of 13.6k. Location: China General Built: 2021, China Flag: China Class: CSS Dimensions…
-
SOLD: 120 m3 Hopper Dredger with 2 m3 Grab
This is a modern, compact and efficient self-propelled grab hopper dredger. Equipped with a 360 degree azimuth propulsion unit, self-elevating spud legs and a shallow draft, she is highly maneuvrable vessel able to dredge in more confined hard to reach areas. Operating with a small crew she is an efficient choice for smaller dredge requirements…
-
SOLD: 2,000 m3 Trailing Suction Hopper Dredger (TSHD) (3-Sisters)
This 2,000 m3 Trailing Suction Hopper Dredger (TSHD) was built in 1975 in Holland and its Classification Society is CSS (China Classification Society). Located in China Price is for each Dredger Principal Dimensions and Characteristics Year Built: 1975 Classification Society: CSS (China Classification Society) Length Over All (w/ ladder) approx.: 83.85…
-
SOLD: 8000 m3 Trailing Suction Hopper Dredger (TSHD)
The 8000 m3 hold capacity dredger has a dredging depth of 38 m. The dredge pumps are IHC HYTOP/HRMD172-36-85 x 2 sets, 10800 CBM. Method of discharge is rainbowing. GT/NS is 8031/4497. The overall length is 121 m, the breadth is 22 m and depth is 9 m. Draft is 4.182 m / 6.50 m.…
