-
2020 Mudcat Horizontal Cutter Dredge
This Mudcat 115D was built in 2020 and has only 1000 hours. Everything works as it should and it is a great dredge. Located in the State of Louisiana General Information Length: 33 ft. Width: 8 ft. 6 in. Draft: 22.5 in. Weight: 16,250 lbs Year Built: 2020 / USA…
-
New – 18″ x 18″ Custom Shark Dredge
This 18″ x 18″ CUSTOM SHARK DREDGE MODEL SH-10300-56D-SP has a minimum digging depth of 5′ and maximum of 56′. Overall length (with ladder) of 112′-4″ and a width (with side tanks) of 29′- 11″. Principal Dimensions and Characteristics Overall length (with ladder) 112′-4″ (34m) Overall width (with side tanks) 29′ – 11″ (9.1 m)…
-
New – 8″ Horizontal Cutter Dredge VMI 815
This VMI 815 horizontal cutter dredge built in 2021 has 1,324 hours on it. The dredging system is one truck transportable and comes with a cable drive system. The Cummins Diesel engine has 345hp (257kW). The dredging depth maximum is 15-ft with nominal capacity of 3,000 GPM (11,356 L/min). Pipe, hose, floats, and cable are…
-
New – 10″ Horizontal Auger Dredge
Location: Canada Principal CharacteristicsNew Hydraulic pumpRebuilt Engine 5.9 CumminsRebuilt dredging pump 10″Stainless Steal Ponton All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
-
1985 Mudcat by Ellicott Machine Corp dredge Model 815
1985 Mudcat by Ellicott Machine Corp dredge Model 815. Piping and trailer included. Located in Brown County Ohio East of Cincinnati. Would be a good unit for someone with a pond or marina. Location: State of Ohio, USA
-
12-inch Horizontal Dredge IMS 7012
IMS model 7012 Horizontal Cutter Dredger built in 2014. Reported to be in good working condition. The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge with a dry weight of 47,700 lbs (21,636 kg). Dredging depth is 30-ft using Starwheel Drive System and 32.8 using Cable Drive System. Cutterhead torque is 23,885 in.-lbs. (2,969…
-
16-inch Cutter Suction Dredge (CSD), AMMCO PD-16-14
Stationary suction dredger with cutter, driven by stilts and banding winches for uniform sweeping. Equipped with cutter scale for effective dredging. The dredging pump has 16″ suction and 14″ discharge, driven by a gearbox with the right ratio by an 700 HP engine of power, 500 HP for the pump and the rest for the…
-
NEW PRICING – 3-inch Remote Controlled Horizontal Dredge, LWT “Pit Hog” BCV-5
LWT Pit Hog Remote Controlled Dredge purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′ with a length overall…
-
12-inch Horizontal Dredge, IMS 7012
The 7012 HP Versi-Dredge is a one-truck transportable hydraulic dredge ideal for dredging rivers, small ports, canals, lakes, and small beach restoration. This unit is reported to be in very good condition, recently completely reworked. The dredge has been engaged in two projects. Dredging depth with Starwheel Drive is 30-ft and with Cable Drive is…
-
New Price – 12-inch Self-Propelled Horizontal Dredge IMS 5012
Built in 1999 with only 1,700 working hours. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such as canal, reservoir, and marina dredging projects.…
-
NEW PRICING – 3-inch Remote Controlled Horizontal Dredge, LWT “Pit Hog” BCV-4
LWT Pithog Remote Controlled Dredges purchased for a job that did not happen. Low original hours. Can be controlled from shore or on-board. Complete set of manuals which show date of September 2003. Dredging working depth is 20′ with suction and discharge diameters of 8.75″. Pontoon (2) length is 40′ with a length overall of…
-
4-inch Horizontal Cutter Dredge, Model VMI MDE-415HN
Built in 1992 with dual hydraulic pump drive – direct from engine. Dredging debt is 15-ft. Cutter diameter is 16-in with a width of 8-ft 6-in. Pump suction and discharge diameters are 4-in. Pump capacity is variable to 1000 GPM @ 130’ Head (Water @ 68 degrees F) @1750 RPM. The dredge has a length…
-
12-inch Horizontal Dredge IMS 5012-HP
Built in 2007, the dredge has 6,907 working hours. Self-Propelled with IMS patented Starwheel Drive. The dredge has a maximum dredging depth of 22-feet (6.7 m) with a discharge diameter of 12-inches (305 m) and a suction diameter of 9.75-inches (248 m). This durable hydraulic dredge is ideal for a variety of dredging applications such…
-
20-inch Cutter Suction Dredge, IHC 2600
The IHC Beaver 2600 was built in 2002 and is classified with the Italian Register. The dredge has a max dredging depth of 16 m with a 550mm suction and 500mm discharge. Power of the diesel engine for the dredge pump drive is 1566 kW (2130 hp). Power at the cutter shaft at approximately 30…
-
8-inch Jet Suction Dredger, Container Shipable, New
The plain suction dredger is a demountable type. The design of the structure is simple, simple and sturdy in construction. The plain suction dredger is designed for efficient operation and easy maintenance. The hull consists of 3 pontoons: the main pontoon and two side pontoons with a simple and quick assembly and disassembly system. A…
-
14 x 12-inch AMMCO Dredge
This 14 x 12-inch AMMCO Dredge was built in Nashville, the hull was rebuilt/refurbished in 2014. The vessel is a stock design hydraulic dredge built for commercial use at mine sites and protected waters. The dredge is in full operating condition, and is currently disassembled in a boatyard. Location: State of New Jersey, USA Principal…
-
200 mm (8-inch) Electric Powered Cutter Suction Dredge
This dredge was built in 1990. The dredge is fully electrical dredge and is in very good condition and very easy to operate. The price includes 250 m cable 4 x 180 and 250 m metal hose and all necessary needs to work. The dredge can be plugged into a 400 kw-380 V generator or…
-
10-inch Horizontal Cutter Dredger, IMS 4010
Built in 2002 in USA. Dredging depth of 6.1 m with a production capacity of 150 m3/hr. Discharge distance of 400 m. Hydraulic system pump is a Parker PAVC100BR46C3/PAVC65WB2R4A, a variable displacement, axial piston and a fixed displacement pump. Pump capacity is 100 gpm @2,000 psig. Cutter head has a diameter of 559 m and…
