-
SOLD: 8-inch Horizontal Cutter Dredge Mudcat MC-15
This Mud Cat dredge is ideal for most horizontal auger dredge applications, including agricultural and industrial ponds, marina maintenance, canals, etc. The dredger is powered by a Detroit Diesel 6-71 RC/model 6030N) with 175 hp @1800 RPM. It has a dredging depth of 15-ft. Comes with 250-ft of 10″ fixed HDPE pipe. Location: State of…
-
SOLD: 12-inch IMS 5012 Horizontal Cutter Dredger
One-truck transportable hydraulic dredge features IMS’s patented Starwheel® drive self-propulsion system eliminating the need for cables or spuds. The 5012 LP is ideal for lake, canal, and river dredging projects. Built in 1997 the dredger has 4,387 working hours. Powered by a Cummins Diesel engine with 250 hp. Propulsion is by Starwheel Drive self-propulsion. Additional…
-
Sold – 200 mm (8-inch) Electric Powered Cutter Suction Dredge
Dredge Info This dredge was built in 1990. The dredge is fully electrical dredge and is in very good condition and very easy to operate. The price includes 250 m cable 4 x 180 and 250 m metal hose and all necessary needs to work. The dredge can be plugged into a 400 kw-380 V…
-
SOLD: Crisafulli SD110
2010 Crisafulli SD110 w/full cab, Yamaha 115 4 stroke engine and trailer. Also includes trailer full of pipe – approx. 500-ft. The dredger is a lightweight (9,000 pounds), small (25 x 8.5 foot) self-propelled pontoon hull. Cutter head is 102 inches, dredging depth max in 12-ft. Capacity of sludge processing is 85 yd3/hr. Discharge diameter…
-
Not Available: 10-inch Horizontal Cutter Dredger, IMS 4010
Built in 2002 in USA. Dredging depth of 6.1 m with a production capacity of 150 m3/hr. Discharge distance of 400 m. Hydraulic system pump is a Parker PAVC100BR46C3/PAVC65WB2R4A, a variable displacement, axial piston and a fixed displacement pump. Pump capacity is 100 gpm @2,000 psig. Cutter head has a diameter of 559 m and…
-
Sold – 8-inch Horizontal Cutter Dredger Mud Cat MC275D
This Mud Cat MC275D has 2,324 hours on it. The dredging system is one truck transportable and comes with cable drive system as well as a robust dual marine prop drive system for self-propelled dredging. The John Deere Diesel engine has 300hp (224kW). Dredging depth max is 25-ft with nominal capacity of 3,000 GPM (681m3/hr).…
-
SOLD: 10-inch Disch. Horizontal Cutter Dredger IMS Model 4010
Built in 2001. Designed and built by IMS, this 177 horsepower unit was made as a self-contained and portable hydraulic power source. The primary purpose of the power unit is to furnish high-pressure fluid to power the hydraulically driven IMS pumping system. The Murphy hour meter reads 641 hours. The dredge is in complete running…
-
SOLD: 18-inch (450 mm) Cutter Suction Dredger (CSD)
The IHC Beaver 1200 C Cutter Suction Dredger was built in 2004. Prime mover is a Caterpillar 3508 (Top End 2020 ) with 620 kW. The engine has 37,000 working hours. The dredge pump is a 2016 IHC-1100-200-400. Aux power is a Caterpillar 3306 overhauled in 2019. It has 4,000 hrs. Max dredging depth is…
-
SOLD: 14-inch Jet Assisted Cutter Suction Dredge – Ellicott 870-JD – Jones Act Compliant
The 870 Series Jet Dragon® combines the reliability and durability of our industry proven Ellicott dredge while adding a ladder mounted dual hydra jet pump, to increase efficiency at deeper digging depths. Both the main pump engine and auxiliary engine are Caterpillar low emission ACERT engines. Max dredging depth is 60-ft. Swing width at max…
-
SOLD: 8-inch Horizontal Cutter Dredge – VMI Model 815
This listing is for an 8-inch Horizontal Cutter Dredge that was built in 2014. It has approximately 1,192 run time hours and was only used for one job. Location: Texas, USA Principal Dimensions and Characteristics Year Built: 2014 Serial Number: 824 Length: 11.73 m 38.6 feet Height (without A/C): 2.69 m…
-
Not Available – 8″ Horizontal Cutter Dredge VMI 815
This VMI 815 horizontal cutter dredge built in 2021 has 1,324 hours on it. The dredging system is one truck transportable and comes with a cable drive system. The Cummins Diesel engine has 345hp (257kW). The dredging depth maximum is 15-ft with nominal capacity of 3,000 GPM (11,356 L/min). Pipe, hose, floats, and cable are…
-
SOLD: 20-inch Cutter Suction Dredge, IHC 2600
The IHC Beaver 2600 was built in 2002 and is classified with the Italian Register. The dredge has a max dredging depth of 16 m with a 550mm suction and 500mm discharge. Power of the diesel engine for the dredge pump drive is 1566 kW (2130 hp). Power at the cutter shaft at approximately 30…
-
Sold – 6-inch Horizontal Cutter Dredger, LWT 3010 “Pit Hog”
This dredge is in fully working order, and runs and pumps great, with a 4-inch Cornell Pump with a 6-inch Discharge. The Air Conditioning Unit has been recently replaced. The 1994 Featherlite Flatbed Trailer pictured is included. Slurry Production is approximately 1,200 GPM (4,542 L/hr.) depending on job conditions. Location: State of Minnesota, USA …
-
Not Available: 6500 m3 Non-Propelled Cutter Suction Dredge
This listing is for a 1000mm (40-inch) Non-Propelled Cutter Suction Dredger with a discharge distance of 6 km. The dredge was built in 2019 in China and has a classification of CCS Unrestricted Navigation. Flag: China Location: China Dimensions and Characteristics Year Built: 2019 / China Classification CCS Unrestricted Navigation Length Overall:…
-
Sold – 16-inch Cutter Suction Dredger NEW construction
The 16-inch CSD is reliable, fuel efficient and has low maintenance costs. This robust and highly productive dredger is equipped with state-of-the art technology. Max dredging depth is 10 m. It has a 16/12HG-II-(7)-850R-230 pump that combines high efficiency and a large ball passage to provide a high level of availability. The pump has a…
-
Not Available: 12-inch Horizontal Dredge IMS 7012
The dredge was used in Florida on a peat bog for all 6,410 hours, so no major wear on the pump or cutter. This unit was repainted and refurbished at IMS’s factory for a total cost of $77,000. Some of the major components replaced included: Both Starwheel gearboxes, hydraulic cylinders, hydraulic valve bank, duo cone…
-
Not Available: 10-inch Cutter Suction Dredger (CSD)
Fully reconditioned in 2002, the dredger was originally built in 1987. Dredge pump is a Warman with dredging depth of 10m (32.81-ft), a suction diameter of 305 mm (12-inch) and a discharge diameter of 254 mm (10-inch). Delivery of sand is 150 m3/h. The dredger is powered by V16 GM and 6 cylinder DAF with…
-
Not Available: 600 mm Cuter Suction Dredger
Built in 2007 in Korea. The dredger has a capacity of 400m3/h with a dredging depth of 16m. Suction pipe diameter and discharge pipe diameter are 600mm. Main power is a NIIGATA 6L32CLX engine with 2,580hp @ 650 rpm. The generator is a NIIGATA 6L20AX with 750 hp @ 900 rpm. Location: South Korea …
