-
SOLD: 6″ DR 13.5 HDPE Pipe
For sale: 6″ DR 13.5 in 50 ft. sections. This pipe was only used one time and is located in the United States. Location: North Carolina Dimensions and Characteristics Material: High Density Polyethylene SDR: SDR 13.5 Sections: 50 ft. lengths Quantity Available: 83 pieces Price: $4.00/ft Our pipe inventory changes…
-
SOLD: 10 inch SDR 17 HDPE Pipe
For sale: 10 inch SDR 17 HDPE Pipe located in the United States. Available in 40′-50′ sections. Some pieces have flanges and back up rings. Location: Florida, USA Type, Quantity, and Pricing Type: 10″ SDR17 Quantity: 750 LF Price: $10.35/ft Our pipe inventory changes weekly. If you don’t see what you’re looking for please give…
-
SOLD: Dock Barge with 7543 Tiger Crane
Dock / deck barge with 7543 Tiger Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 115 Yamaha Outboard Crane Information Model: 7543 Tiger Crane with Power Pack Elevated Helm Hydraulic Cat Head 2 Spuds Our deck barge inventory changes weekly. If you don’t see what you’re looking for, please call +1 (281) 248-8158 or email…
-
SOLD: 20-inch Cutter Suction Dredge, IHC 2600
The IHC Beaver 2600 was built in 2002 and is classified with the Italian Register. The dredge has a max dredging depth of 16 m with a 550mm suction and 500mm discharge. Power of the diesel engine for the dredge pump drive is 1566 kW (2130 hp). Power at the cutter shaft at approximately 30…
-
SOLD: 500 hp Dredge Cutterhead Module For 22-inch Dredge
48-inch Cutter Basket with 500hp hydraulic gearbox. Assembly came off a 22 inch dredge. Location: State of Florida, USA Dimensions and Characteristics Cutter Diameter: 1219 mm 48-inch Hydraulic Gearbox: 373 kW 500 hp Our inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225)…
-
Not Available: 16-inch Maddox Booster Pump
16” Maddox booster pump powered by Detroit diesel 12v92T with a twin disc PTO driving a Falk gear box . Pump is a Maddox 16x16x43. Booster is being sold as is where is. Location: State of Florida, USA Our inventory changes weekly. If you don’t see what you’re looking for please give us a call…
-
Not Currently Available: 883 m3 Trailing Suction Hopper Dredger
Built in 1965 in the UK and will be delivered under fresh Phoenix Class. The dredger has a dredging depth of 26m. Discharge is via bottom door. Cargo load time is 5000 m3/hr and has a hold capacity of 883 m3. The dredger has an overall length of 62.17m, breadth of 58.03m and depth of…
-
Not Available: 18/16 Warman Dredge Pump
Rebuilt in 2022 including new housing and new back plate. Impeller 85%. Location: Netherlands
-
Not Available: 1000 hp, 14 m, 12-PAX 28-knot Crew Boat
Built in 2012 in GBI, the crew boat has a class U.K. MCA COP 12+2 / 60 MILES. The boat is powered by 2 Cummins QSC 8.5 with combined power of 1000 hp. Propulsion is 2 x FPP and max speed is 28 knots. Length overall is 14.9 m, beam is 5.0 m and draft…
-
Not Available: 300 mm (12-inch) Submersible Pump, Damen DOP 3025
This Damen 3025 is a hydraulically driven, submersible dredge pump with wear resistant pump parts. Maximum working depth for the standard executed DOP pump is -40 meters. A protective casing, made of steel, is surrounding the dredge pump and drive. The hydraulic motors and gearbox are suitable for continuous operation under and above water level.…
-
Not Available: 2,500 m3 Self-Propelled Hopper Barge
This listing is for a 2,500 m3 capacity Split Hopper Barge with twin fixed pitch propellers. This vessel was designed for a trailing suction hopper dredger. But the suction system is not installed. It is operated as a dumping door barge. There are 16 bottom doors which are operated by two electric controllers near front…
-
Not Available: 40 m x 24 m, 560-tonne payload Jack Up Barge
Built in 2018, the spuds are 30 m (98-feet) and are operated with both a winch and jacking cylinders. It has accommodations for 2 persons. Location: Korea Dimensions and Characteristics Year Built: 2018 Length: 40 m 131-feet Beam: 24 m 78.7-feet Depth: 3.2 m 10.5-feet Draft: 2.5 m 8.2-feet …
-
Not Available: 800 hp Single Screw General Purpose Towing Tug
Single screw tug is powered by a NIIGATA 6MG 20 CX 800hp engine. The tug has a length of 23.90 m, a breadth of 7.0 m and depth of 3.0 m. The tug was built in 1985 in Japan. Location: West Mediterranean Sea General Built Year / Place: 1985 / Japan Dimensions and Characteristics…
-
Not Available: 8 m3 Clamshell Crane Dredger
318 Ton Grab Dredger built in 1986 in Japan. The dredger’s Class is KST. It is 33.62m in length and 16.0 in breadth and depth of 3.0 m. It has a SKK-1800GDT-A with a max dredging depth of 40m. Bucket size is Light 8m3 and Heavy 6 m3. Hammer (2) is 28 Ton. Engine is…
-
Not Available: 8-inch Horizontal Cutter Suction Dredge Mud Cat 115D
The MC 115D – was designed around the premise of making a durable, productive, transportable, stable, safe, and affordable dredge for entry-level buyers or operations on a budget. The controls can be learned quickly, and maintenance is simple. The system boasts a powerful 125 HP (93 kW) diesel engine, 2,000 GPM (454m3/hr.) dredge pump, and…
-
Not Available: 650 hp Twin Screw Work Tug
Nearly new Main Engines: JD 6090 tier 2 with 650hp. Gears and ration: MG 512 and 3:10. The tug has 2 aft winches. It has a length of 42 feet, a beam of 14.2 feet and a depth of 5.7 feet. Fuel capacity is 500 gallons. Location: State of Oregon, USA General Built: 1953…
-
Not Available: 23′ Modified V Hull HDPE Work Skiff
New Construction – the HDPE skiff is a length of 23-ft, beam of 8-ft 4-in, sides 34-in and a transom height of 20-in. Hull, floor and bench material thickness is 1/2” HDPE. Transom and upper deck material are 3/4″ HDPE. Features include fixed rear bench w/ storage, front platform/storage compartment and transom width to receive…
-
Not Available: 16-inch Cutter Suction Dredger NEW construction
The 16-inch CSD is reliable, fuel efficient and has low maintenance costs. This robust and highly productive dredger is equipped with state-of-the art technology. Max dredging depth is 10 m. It has a 16/12HG-II-(7)-850R-230 pump that combines high efficiency and a large ball passage to provide a high level of availability. The pump has a…
