Dredging Equipment – Dredge Brokers





Filters
Search

Category

Location

  • SOLD: 8-inch SDR 17 & SDR 26 HDPE Pipe Mixed

    SOLD: 8-inch SDR 17 & SDR 26 HDPE Pipe Mixed

    • 47,500 EUR
    • 200823-PP
    • Location: Netherlands

    Approximately 2,400 m of 8-inch SDR 17 & SDR 26 HDPE Pipe mixed with couplings and flanges. 200 pieces of 12 m lengths. Pipes was only used 100 hours total. About 50 pieces were never used (new). Produced in 2019. Can be purchased en-bloc with 200824-PF and 200822-CP Location: Netherlands Standard Dimension Ratio (SDR) 17…

  • SOLD: 16-inch SDR 17 HDPE (Polypipe) New Surplus

    SOLD: 16-inch SDR 17 HDPE (Polypipe) New Surplus

    • 210702-PP
    • Location: Florida

    Quantity Available – 1,000 ft in 40-foot lengths (25 pieces total). New Surplus. Location: State of Florida, USA           Principal Dimensions and Characteristics   Material High Density Polyethylene (Black)   Pipe OD (Nominal) 406.4 mm 16 inches   Pipe ID (Nominal) 356 mm 14.005 inches   Wall Thickness (Nominal) 24 mm…

  • SOLD: 225 mm (8-inch) Pipe Floaters

    SOLD: 225 mm (8-inch) Pipe Floaters

    • 35,000 EUR
    • 200824-PF
    • Location: Netherlands

    200 piece floaters for 8-inch pipe. Built in 2019. Can be purchased en-bloc with 200822-CP and 200823-PP Location: Netherlands

  • SOLD: 7316 m3 Trailing Suction Hopper Dredge (TSHD)

    SOLD: 7316 m3 Trailing Suction Hopper Dredge (TSHD)

    • 28,800,000 USD
    • 210807-DS

    Built in 2021 in China, the TSHD has 2 sets x 8000cbm inboard dredging pumps. Max dredging depth is 36 m. Hopper capacity is 7310cbm. Dredger main engines are 2 x DN8330ZC engines with 3310kw each with cruising speeds of 13.6k. Location: China General   Built: 2021, China   Flag: China   Class: CSS Dimensions…

  • SOLD: 160 mm Dragflow HY85 160 HC Submersible Pump (2 Available)

    SOLD: 160 mm Dragflow HY85 160 HC Submersible Pump (2 Available)

    • 25,000 EUR
    • 200822-CP

    Built in 2018 at Dragflow in Italy. Hydraulic motor. Pump has been used for only 300 hours. Suitable for bentonite water, slurry water, sand-water, salt sand water, etc. Can be purchased en-bloc with 200824-PF and 200823-PP Location: Netherlands General Information Built: 2018 / Italy Working Hours: 300 hr Principal Dimensions and Characteristics Weight: 885 kgs…

  • SOLD: 400 m3 Self-Propelled Split Hopper Barge

    SOLD: 400 m3 Self-Propelled Split Hopper Barge

    • 1,850,000 EUR
    • 200904-BS
    • Location: Portugal

    Built in 1997 and completely renovated in 2019, and both engines were replaced by two new ones. The split hopper barge has a hold capacity of 400m3 (523 yd3). It is powered by 2 Diesel Volvo Penta engines with 630 hp. It has 2 Azimuthal Columns Aquamaster Rauma thrusters. The barge has a GT of…

  • SOLD: 7905 DWT Ballastable Barge for Charter

    SOLD: 7905 DWT Ballastable Barge for Charter

    • 200916-BD
    • Location: Northern Europe

    Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…

  • SOLD: 8-inch Cutter Suction Dredger (CSD)

    SOLD: 8-inch Cutter Suction Dredger (CSD)

    • 163,000 USD
    • 200922-DB

    This DSC dredge was rebuilt in 2018 (built 1997) and has new controls switches and wiring new paint and a new seat. The CAT 3116 was overhauled as well, injection pump rebuilt alternator and starter inspected and tested. All functions were tested on land before going to storage. Minimum dredging depth is 3-ft and maximum…

  • SOLD: 12-inch SDR 17 HDPE Pipe

    SOLD: 12-inch SDR 17 HDPE Pipe

    • 200600-PP
    • Location: California

    4,000-feet available – 12-inch SDR 17 HDPE Pipe. Mostly in 50-ft sections. The pipe was used for a few dredging projects over a few months pumping mud/clay/water slurries. SOLD Location: State of California, USA Principal Dimensions and Characteristics Material High Density Polyurethane Pipe OD (Nominal) 12-inches 304.8 mm Pipe ID (Nominal) 12.75-inches 323.6 mm Wall…

  • SOLD: Self Propelled Floating Revolving Crane Demag 410e

    SOLD: Self Propelled Floating Revolving Crane Demag 410e

    • 216,000 EUR
    • 200706-BL
    • Location: Northern Europe

    Built in 1966 in Germany, the barge was rebuilt in 1980. Self propelled crane barge has a new class for European inland water. The crane is a Demag 410 hoisting/dredging crane. On the stern deck, there is a 16 tons A-frame for 16 tons hydraulic hoisting. The barge is powered by 2 Daimler Benz Germany…

  • SOLD: Crane Barge Anchoring System

    SOLD: Crane Barge Anchoring System

    • 165,000 USD
    • 190917-CM

    Components for a four-point anchoring system. Barge not included. Package includes winches, hydraulic power units, interconnecting line packages, vertical fairleads, anchors and buoys. 1) Quantity Four (4) ACE 30 Heavy Ton Winches. 2) Quantity Two (2) ACE 89 kW Hydraulic Power Units, Open Loop Diesel 3) Quantity Four (4) ACE Interconnecting Hydraulic Line Packages 4) 5…

  • SOLD: 12-inch SDR 17 HDPE Pipe

    SOLD: 12-inch SDR 17 HDPE Pipe

    • 201009-PP
    • Location: Tennessee

    2 miles of 12-inch SDR 17 HDPE Pipe in 50-ft sections. Used for fresh water transfer. Pipe is reported to be in excellent reusable condition. Location: state of Tennessee, USA Principal Dimensions and Characteristics Material High Density Polyethylene Pipe OD (Nominal) 12-inches 304.8 mm Pipe ID (Nominal) 12.74-inches 323.6 mm Wall Thickness (Nominal) 0.75-inches 19.05…

  • SOLD: 20-inch Cutter Suction dredge, IHC Beaver 1600

    SOLD: 20-inch Cutter Suction dredge, IHC Beaver 1600

    • 800,000 USD
    • 171104-DB
    • Location: Vietnam

    This 20-inch Cutter Suction dredger, IHC Beaver 1600 was built in Holland in 2000. The IHC Beaver is well known for its robust construction, reliable operation and excellent performance. Among the salient features of the vessel are the compact dredge pump drive incorporating a reduction gearing with integrated pump bearing, and a fresh water engine…

  • Sold: 20-inch SDR 11 HDPE Pipe

    Sold: 20-inch SDR 11 HDPE Pipe

    • 180404-PP
    • Location: Tennessee

    This 20-inch SDR 11 HDPE Pipe is new surplus and is in very good condition. 1,000 feet Available Location: Tennessee Dimensions and Characteristics   Material High Density Polyethylene (Black)   Pipe OD (Nominal) 508 mm 20 inches   Pipe ID (Nominal) 410.11 mm 16.146 inches   Wall Thickness (Nominal) 46.18 mm 1.818 inches   Weight…

  • SOLD: 10-inch SDR 17 HDPE Pipe with Pipe Floats

    SOLD: 10-inch SDR 17 HDPE Pipe with Pipe Floats

    • 180518-PP
    • Location: Georgia

    5,000-feet of 10-inch SDR 17 Pipe. 46-Sets of Pipe Floats Location: State of Georgia, USA Price for Pipe Floats: USD $250.00 per set           Principal Dimensions and Characteristics   Material High Density Polyethylene (Black)   Pipe OD (Nominal) 10.75-inches 273.05-mm   Pipe ID (Nominal) 9.410-inches 239-mm   Wall Thickness (Nominal) 0.632-inches…

  • Not Available: 750 mm Cutter Suction Dredger (CSD)

    Not Available: 750 mm Cutter Suction Dredger (CSD)

    • 160907-DB

    This large Cutter Suction Dredger was built in China in 2007. It is is Indian flagged, and classed IRS (International Registry of Shipping). Total Installed Power is 5,866 kW (7,866 hp). It is currently in use and working in India. Location: Western India Dimensions and Characteristics   Length Over All 73.2 m 240-feet   Length…

  • SOLD: 1,604 hp Twin Screw Tug for Charter

    SOLD: 1,604 hp Twin Screw Tug for Charter

    • 160422-VN
    • Location: Caspian Sea

    This 1,604 hp Twin Screw Tug was built in 1988 in the USSR and its Classification Society is RMRS (Russian Maritime Register of Shipping), KM*L1 R2RSN AUT2 Tug. It was last Dry Docked in June, 2013 and the next is due in December, 2016 and the next Special Survey is due in November, 2019. Flag:…

  • Sold – 10-inch SDR 9 Lightly Used HDPE Pipe

    Sold – 10-inch SDR 9 Lightly Used HDPE Pipe

    • 161010-PP

    This dredge pipe is straight and undamaged with minimal weld joints and almost no wear. Quantity Available: 16,000-feet in 40 to 50-foot lengths.. Location: State of Colorado, USA           Principal Dimensions and Characteristics   Material High Density Polyethylene (Black)   Pipe OD (Nominal) 10.75-inches 273 mm   Pipe ID (Nominal) 8.219-inches…