-
35-tonne BP Twin Cycloidal Propulsion Towing Tug
Built in 1977. The hull is built of Ordinary Strength Steel with five water tight bulkheads. Continuous main deck from Poop deck until the accommodation. The Forecastle is raised one level. The accommodation is in the middle and below there are the cycloidal propellers. Powered by a Stork Wartsila 4tew SWD 9 FHD 240 enging…
-
650 hp Twin Screw Work Tug
Nearly new Main Engines: JD 6090 tier 2 with 650hp. Gears and ration: MG 512 and 3:10. The tug has 2 aft winches. It has a length of 42 feet, a beam of 14.2 feet and a depth of 5.7 feet. Fuel capacity is 500 gallons. Location: State of Oregon, USA …
-
NEW 76 HP, 25-foot Tug Boat/Dredge Tender w/ A-frame
Factory built in 2016 but never used. The vessel has 2 side pontoon that are bolt mounted on the side of the hull. The length of the vessel is 24-ft 10-in and width of 13-ft (including side pontoons). The XinHong / XHSJ20-374A-00 winch is hydraulic and has a capacity of 3000 lbs. It has a…
-
2,400 hp Twin Screw Towing Tug
This 2,400 hp Twin Screw Towing Tug was built in 1974 by the Putnam Shipbuilding Corp. in Palatka, Florida. Located in the state of New York, USA Principal Dimensions and Characteristics Year Built: 1974 Length Over All: 28.96 m 95 feet Beam: 8.84 m 29 feet Depth: 3.69 m 12…
-
15 lbs/min Complete Portable Polymer Preparation System
This 15 lbs/min Complete Portable Polymer Preparation System is designed to prepare up to 15 lbs/minute of activepolymer in a dry form. The system is installed in three (3) sea containers and is designed to make down polymer at a 0.5% solution into five (5) mixing/aging tanks. The system contains four (4) feed pumps with…
