Pumps & Dredge Components

  • 18/16 Warman Dredge Pump

    18/16 Warman Dredge Pump

    • 72,500 EUR
    • 230602-CP

    Rebuilt in 2022 including new housing and new back plate. Impeller 85%. Location: Netherlands

  • Dragflow HY 400B Submersible Pump w/ Cutters

    Dragflow HY 400B Submersible Pump w/ Cutters

    • 216,700 USD
    • 230700-CP

    Built in 2014, worked for only one shift then project cancelled. Huge inventory of spare parts including impeller and housing. The pump has a capacity of 1020-1150 m3/h and motor power of 300-410 hp. The main body is spheroidal cast iron GS500 and main shaft is austempering NiCrMo4 Steel. The cutter is a Hydraulic excavator…

  • 12-inch Damien Submersible Pump and Power Unit

    12-inch Damien Submersible Pump and Power Unit

    • 218,000 USD
    • 220811-DU

    Damien DOP PUMP / 3025 with Power Pack. This Pump was built in 2005 and can be coupled to an excavator, crane or A Frame. It can be used as a deep dredging system and can also be coupled to a booster for greater discharge distance. Pontoons included. Location: Mexico          …

  • 500 hp Dredge Cutterhead Module For 22-inch Dredge

    500 hp Dredge Cutterhead Module For 22-inch Dredge

    • 34,000 USD
    • 221100-CP

    48-inch Cutter Basket with 500hp hydraulic gearbox. Assembly came off a 22 inch dredge. Location: State of Florida, USA           Principal Dimensions and Characteristics   Cutter Diameter:  1219 mm 48-inch   Hydraulic Gearbox:  373 kW 500 hp                     All details on these…

  • IMS 1012 Booster Pump

    IMS 1012 Booster Pump

    • 95,000 USD
    • 220807-CP

    B1012-754 IMS 5003X-03 built in 2008. Has runtime hours of 5,550. Powered by a John Deere 6090 engine with 325 bhp. Dredge pump is a GIW Cast Iron with discharge diameter of 10-in and suction diameter of 12-in. Pump performance is 4,000 gpm (252 liter/sec) @170-ft (51.8 m) TDH (water) @ 884 rpm Can be…

  • 6-inch Dredge Pump, hydraulic driven.

    6-inch Dredge Pump, hydraulic driven.

    • 22,000 USD
    • 220619-CP

    Innovative Material Systems CDH100C dredge pump, Hours: 1,132 on meter, Serial: 1024, Cummins 4BT, Fuel type: Diesel, Inlet/discharge diameter: 6″, (2) pumps, Hydraulic driven, (7) suction pipes, (1) 10′ L, (3) 8′ L, (3) 3′ L, Trailer, 16′ L x 84″ W, Suspension: Spring, Axles: Tandem, Tire size: ST205/75R15, good condition. Location: State of Kansas,…

  • 3300 PSI 25 GPM Hydraulic Power Unit (HPU)

    3300 PSI 25 GPM Hydraulic Power Unit (HPU)

    • 83,250 USD
    • 220614-CP

    This HPU is driven by a Tier 4 Certified JCB Engine. Operating pressure 1200-3300 PSI with a hydraulic flow of 0-52 GPM. Hydraulic tank and diesel tank are both 120 gallons. 4″ x 10″ box tube skid rails & 10″ forklift boots. Fully boxed frame tubing for added protection Location: State of South Carolina, USA…

  • 4-inch Diesel Booster Pump 118-hp

    4-inch Diesel Booster Pump 118-hp

    • 81,760 USD
    • 220615-CP

    The 4-inch Diesel Booster Pump has a 118-hp John Deere Engine. It has a 96 gallon fuel cell. The engine has liquid cooled, 12 Volt Power-in-Line 4 cycle Turbo Charge. The Pump has a min flow of 250 GPM and max flow of 1200 GPM. Discharge size is 4-in and suction size is 6-in. Solid…

  • 4-inch Diesel Booster Pump 118-hp

    4-inch Diesel Booster Pump 118-hp

    • 81,730 USD
    • 220617-CP

    The 4-inch Diesel Booster Pump has a 118-hp John Deere Engine. It has 96 gallon fuel cell. The engine has liquid cooled, 12 Volt Power-in-Line 4 cycle Turbo Charge. The Pump has a min flow of 250 GPM and max flow of 1200 GPM. Discharge size is 4-in and suction size is 6-in. Solid handling…

  • 16-inch Maddox Booster Pump

    16-inch Maddox Booster Pump

    • 89,000 USD
    • 220804-CP

    16” Maddox booster pump powered by Detroit diesel 12v92T with a twin disc PTO driving a Falk gear box . Pump is a Maddox 16x16x43. Booster is being sold as is where is. Location: State of Florida, USA

  • 4-inch Diesel Booster Pump 118-hp

    4-inch Diesel Booster Pump 118-hp

    • 81,760 USD
    • 220616-CP

    The 4-inch Diesel Booster Pump has a 118-hp John Deere Engine. It has 96 gallon fuel cell. The engine has liquid cooled, 12 Volt Power-in-Line 4 cycle Turbo Charge. The Pump has a min flow of 250 GPM and max flow of 1200 GPM. Discharge size is 4-in and suction size is 6-in. Solid handling…

  • 12-inch Submersible Pump with Agitators Dragflow HY 300B

    12-inch Submersible Pump with Agitators Dragflow HY 300B

    • 110,000 USD
    • 220212-CP

    Comes outfitted with a hydraulically driven mechanical agitators, 250 ft of 10 inch fixed HDPE pipe, includes hydraulic power unit and associated controls. Requires misc. riggings and shackles to operate. Location: State of Oregon, USA Principal Dimensions and Characteristics Model: HY 300B (Serial # 2663) Weight: 3542.6 kg 7810 lbs Pump Capacity: 19987 LPM  5280…

  • 10-inch Submersible Pump with Agitators Toyo DP-150B

    10-inch Submersible Pump with Agitators Toyo DP-150B

    • 164,000 USD
    • 220213-CP
    • Location: Oregon

    Pump comes outfitted with a jet ring, water supply pump, 2 saddles and a control box, 50 ft of electrical cord and 250 ft of 10 inch fixed HDPE pipe. Location: State of Oregon, USA           Principal Dimensions and Characteristics     Model: DP-150B-3D1     Outlet: 254 mm 10-in  …

  • Excavator Pump Attachment 10-inch Eddy Pumps

    Excavator Pump Attachment 10-inch Eddy Pumps

    • 163,000 USD
    • 220218-CP

    Non-clog design for high solids industrial pumping applications. Min flow of 1200 gal/min and a max flow of 5000 gal/min. Has a capacity of 300-350 yd3/hr. Only used on one job. Very low hours and in excellent condition. The attachment is currently set up for a Komatsu 400 excavator.  Requires a separate Hydraulic Power Unit…

  • 10-inch Booster Pump with Automation Package

    10-inch Booster Pump with Automation Package

    • 189,000 USD
    • 220220-CP

    The 10-inch booster pump is designed with centrifugal singles suction volute having a 12 inch diameter suction and is arranged for 10-inch inside diameter suction pipe. The 10-inch pump is mounted on a steel base. It is powered by a John Deere 6090 diesel engine rated at 325bhp @2200RPM.. The dredge pump is a GIW…

  • 18-inch Floating Booster Pump

    18-inch Floating Booster Pump

    • 775,000 USD
    • 200112-CP

    This 18-inch (457 mm) Booster Pump is mounted on floating pontoons. The pontoons measure 10 m x 6 m. The booster has been used on one job and run around 1500 hours. It is in good working condition and well maintained. The slurry capacity is 3500 m3/hr and has a discharge distance of 2000 m.…

  • 10-inch Booster Pump

    10-inch Booster Pump

    • 100,000 EUR
    • 191023-CP

    This 10-inch (254mm), 600 hp Booster Pump. The pump is skid mounted and has 2,000 hours. The engine and gearbox are in good condition. Pump is in very good condition. Location: Portugal Principal Dimensions and Characteristics   Year Built: 2015   Transportation dimensions     Length: 6 m x 2 19.7-ft x 2    …