-
Metso 8″ x 6″ Slurry Pump w/ 50 hp electric drive
Metso 8×6 slurry pump with drive and 50 hp motor. Location: State of Nebraska, USA
-
10-inch Booster Pump IMS 1012
The booster has only been used on one project. Impeller and volute cast from high chrome Gasite iron. Discharge diameter is 10-in, suction diameter is 12-in and sphere passage is 5-in. Pump has about 2000 hours. Can be purchased as a package with Dredger 200919-DH Location: State of Florida Pump Dimensions and Characteristics Length: 19-ft…
-
4-inch Diesel Booster Pump 118-hp
The 4-inch Diesel Booster Pump has a 118-hp John Deere Engine. It has a 96 gallon fuel cell. The engine has liquid cooled, 12 Volt Power-in-Line 4 cycle Turbo Charge. The Pump has a min flow of 250 GPM and max flow of 1200 GPM. Discharge size is 4-in and suction size is 6-in. Solid…
-
Damen 250 Submersible Pump
This Damen DOP250 Submersible Pump is a compact pump directly powered by a hydraulic motor, mounted in a protective casing. The robust casing can be fitted out with a large array of suction heads, which results in a versatile dredging tool fit for a broad range of tasks. Pumps are designed to be user friendly…
-
10-inch Ellicott 370 Pump w/ Reducer Complete
This 10-inch Ellicott 370 Pump was built in 2009. It is a complete pump and transmission (bearing housing and shaft). The the impeller and shell have about 60% life remaining. The dry end has been refurbished, and is in good condition. The transmission has new bearings, seals and a cooler. Location: Georgia Principal Dimensions and…
-
27 x 24 x 68-inch Booster Pump with twin Cat 399 power
This is a 27 x 24 x 68-inch Booster Pump with twin Cat 399 engines that are rebuilt, one only has 191 hours. The Ellicott pump made by Mobile Pulley is a complete new pump and has never been used. It is skid mounted and the skid breaks in half so the booster can be…
-
6 x 8-inch Booster Pump
This is a 6 x 8-inch Booster Pump with a Detroit Inline 6 diesel engine. Located in the state of Louisiana, USA Principal Dimensions and Characteristics Type: Booster Pump Make/Model: Furukawa Slurry / LFK004 pump Discharge Diameter: 152.4 mm 6 inches Suction Diameter: 203.2 mm 8 inches Weight: 10,000…
-
Not Available – 10-inch Booster Pump
This 10-inch (254mm), 600 hp Booster Pump. This booster pump is skid mounted and has 2,000 hours. The engine and gearbox are in good condition. Pump is in very good condition. Location: Portugal Pump Dimensions and Characteristics Year Built: 2015 Transportation dimensions Length: 6 m x 2 19.7-ft x 2 …
-
SOLD – 10 x 8-inch Booster Pump w/Mack Engine
This listing is for a Lightning XL booster pump with a Mack 6 cylinder engine. The impeller is worn out. Pump recently painted. Location: state of Texas, USA Principal Dimensions and Characteristics Pump Make/Model: Lightning XL Discharge Diameter: 203.2 mm 8 inches Suction Diameter: 254 mm 10 inches Engine Make / Model: Mack 6 cylinder…
-
Sold: Metso J36 12″ x 12″ Pump
Metso J36 12″ x 12″ Pump Location: State of Nebraska, USA
-
SOLD: 14-inch GIW Pump Impeller
Brand new GIW Impeller 14×36 IN 3M 2C4.5 for a dredge pump. The rotation direction is clockwise from the shaft side. The impeller weights 526.17 kg (1160 lbs). Location: Netherlands
-
SOLD: 160 mm Dragflow HY85 160 HC Submersible Pump (2 Available)
Built in 2018 at Dragflow in Italy. Hydraulic motor. Pump has been used for only 300 hours. Suitable for bentonite water, slurry water, sand-water, salt sand water, etc. Can be purchased en-bloc with 200824-PF and 200823-PP Location: Netherlands General Information Built: 2018 / Italy Working Hours: 300 hr Principal Dimensions and Characteristics Weight: 885 kgs…
-
SOLD: 6-inch Booster Pump with 226 hp Perkins Engine NEW
This is a 6-inch Booster Pump with 226 hp Perkins Engine NEW with only two (2) operating hours. Located in Europe Principal Dimensions and Characteristics Pump Engine: Make/Model: Perkins / 1106-66TA, 2013 Power: 168 kW 226 hp Pump: Make/Model: Senwatec suction pump Pump Performance up…
-
Not Available – 16-inch Maddox Booster Pump w/ Detroit 16V92TI Prime Mover
This is a 16 x 16-inch Maddox Booster Pump with a 16V92TI Detroit Diesel engine, driven through a Falk Gear Box. Booster is in good condition. Location: state of Florida, USA Pump Dimensions and Characteristics Type: Booster Pump Make/Model: Maddox / 16X16X36 Discharge Diameter: 406.4 mm 16 inches Suction Diameter: 406.4…
-
Sold – 24/20-inch Booster Pump with Radiator Cooling Cat 3516
Pump and Gearbox are brand new, only 700 total runtime hours on the prime mover. The pump has a mechanical seal, so there is no need for packing or a seal flushing pump. Suction diameter is 24-inch and discharge diameter is 20-inch. Location: state of Florida, USA The following Chrome Alloy spare parts are included…
-
Sold: Excavator Pump Attachment 6-inch Eddy Pumps
Non-clog design dredge/booster pump for high solids industrial pumping applications. Min flow of 450 gal/min and a max flow of 2000 gal/min. Has a capacity of 150-200 yd3/hr. Only used on one job. Very low hours and in excellent condition. Location: State of California, USA Dimensions and Characteristics Length: 113-in 2.87 m Height: 37-in 0.94…
-
Sold: 10-inch Booster Pump with Automation Package
The 10-inch booster pump is designed with centrifugal singles suction volute having a 12 inch diameter suction and is arranged for 10-inch inside diameter suction pipe. The 10-inch pump is mounted on a steel base. It is powered by a John Deere 6090 diesel engine rated at 325bhp @2200RPM.. The dredge pump is a GIW…
-
SOLD: 2018 600 HP Water Transfer Pumps
Built in 2018, 4 water transfer pumps with John Deere 6135HFC90 engines and Cornell 8NHG19 pump ends. The 8NHG19 pump is designed with Cornell’s renowned quality and durability. It features a 8″ discharge, 10″ suction, and premium hydraulic efficiency. Available in All Iron or CD4MCu materials. Cornell’s patented Cycloseal® design is standard. Data sheets are…
