-
2023 LCT Cargo Vessel, Self-Propelled Sea Going
Built in 2023 this sea going, LCT cargo vessel / barge can be used for containers, heavy vehicles, heavy equipment, coal, bauxite, stone, general cargo, and more. Location: China Built March 2023 Hull material: Steel Flag: China Class Society and Notation: China ZC Price: $3,000,000 General Information Gross Tonnage: 2272 Net Tonnage: 1272…
-
10 x 20 Service Barge
Barge Details & Characteristics Dimensions: 10′ x 20′ Power: Yamaha F150 Outboard Equipment and Other: Gantry crane, Single Pilot Station, Tool Boxes Our barge inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225) 301-2873 or email us to discuss what you’re looking for.
-
Twin 290-man Accommodations Barges
Year built 2009. The barge is 76.16 m (250-ft) in length and has a beam of 17.76 m (58-ft). Maximum draft is 3.0 m (9.84-ft). It has a fresh water capacity of 170 m3, fuel oil capacity of 80 m3 and sewage waste capacity of 580 m3. Equipment include (2) 800 kW CAT generator, (2)…
-
60 inch Pipe Lay Barge with DP and Revolving Crane
Built in 1976 and fully rebuilt and upgraded in 2009. Capable of laying pipes up to 60″ in offshore waters. Deck area is 1500m2. The barge can accommodate up to 280 persons. The main crane is a Clyde DE52 230 + 30 + 15 with capacity up to 1000t (fixed) at a radius of 22m…
-
36 ft. x 12.5 ft. Work Spud Barges (2)
2 work barges. One is 36-inches in height and the other 42-inches. Both barges are 35-ft in length and 12.5-ft in width. Both barges also have 2 spuds. Both of these barges have recently been blasted, painted, re-decked where necessary new manhole were renewed as required. Price is for each barge.Location: State of Texas, USA…
-
Sold – M33 Deck Barge With A-Frame
M33 Deck barge in good condition and ready to work. This barge is part of a package deal with the M36 deck barge linked below. 35′ x 12.6″ x 36″ A-Frame (not pictured) Package Deal; M36 deck barge with spuds M33 deck barge with A frame Location: Louisiana Our barge inventory changes weekly. If you…
-
Sold – 30′ Raked Bow Work Barge
30’x12’x3′ Work barge, built in 2022 by Barge Worx. Location: Louisiana 30x12x3 Raked Bow Barge with following features 1/4″ Plate, 2x2x1/4 framing on 24″ centers, 4 cleats, Flush water-tight manway, 2 coat exterior epoxy paint Dual engine brackets with underdeck rigging pipe and Aluminum console 8″ internal spudwells 6″ spuds 20ft long with hats and…
-
Sold – 17 m, 471 kW Transport Vessel/Landing Craft
Powered by 2 GUASCOR engines, the transport vessel/landing craft has total power of 471 kW (631 hp) at 1800 rpm. The vessel is 17 m in length and 4.2 m breadth. It was built in 1982 and has been reconditioned. The vessel is reported to has 200 hours of use. Location: Portugal General Year…
-
Not Available – 16-tonne Floating Crane and Grab Dredger
Floating Crane built in 1989 with major repair to engines in 2021. The barge was built in 1990. Registered as Germany (ZSUK)”Unionszeugnis” gültig bis 27.10.2025. The barge is 32.0 m in length, 14.30 in width and has a depth of 3.0 m. Overall height is 9.20 m.The cranes is a Weserhütte W320 Caterpillar 6TB00262 215kW…
-
Sold – 54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat
Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a…
-
SOLD: 130′ x 50′ x 12′ Spud Barge, not documented
The vessel is of all welded steel construction with a raked bow, square stern and cambered deck with a concrete pad down the center. There are six (6) compartments: (2 rakes and 4 main body compartments) and four (4) spud wells. All compartments sighted are separated by transverse and longitudinal watertight bulkheads. There are 3…
-
SOLD: 7905 DWT Ballastable Barge for Charter
Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…
-
Sold – Loader Barge with Barko Crane
Loader barge with 1987 Barko 160A TRK Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 2022 Suzuki 150hp In-line 4 Stroke Outboard Ballast Tanks: 2 Pontoons: with Hydraulic Spud Wells and Spuds Crane Information Model: 1987 Barko 160A TRK Crane Orange Peel Grapple Rotex Turntable Reach: 27′ Engine: GM 353 Our inventory changes weekly. If…
-
Sold – Shugart Style 4 Used Sectional Rake Spud Barges
Barge Information For sale: 4 Shugart Style used sectional rake spud barges, located in Florida. Price is for all 4 barges. Barge Dimensions and Details Each barge dimensions: 40′ x 10′ x ‘5 Must buy all 4 Shugart-Style connecting pins Uprights, and crossbeams 3×3 ¼ angle no further than 2′ apart ¼” Plate throughout Each…
-
Sold – 45-foot Twin Propeller Airboat w/ Knuckleboom Crane
This is a 2,400 quad-engine airboat with a 30-knot cruising speed. There is a 10,000 pound deck mounted knuckleboom crane with basket, and a 13,000 pound hydraulic bow winch. Located in the state of Texas, USA Principal Dimensions and Characteristics Length Over All: 45-feet 13.72 m Beam: 16-feet…
-
Sold – 28 m x 16.2 m x 3 m Heavy Spud Barge
This listing is for a 28 m x 16 m x 3 m Barge with 4-point Mooring. It was built in Lebanon in 1999 and was reconditioned there in 2019. Its’ Classification Society and Notation is IROS (International Register of Shipping). Barge is currently fitted with a 75 Ton Lima Crane and a manual grab…
-
SOLD: 300-tonne Floating Revolving Crane
The 300-tonnes barge has a storage area of 12m x 12m. Length of the barge is 36m, breadth is 16m and depth is 4m. The crane is an American-Hoist 300 T with a maximum lift capacity of 65 T at 13 m. Barge equipment includes 2×12 T hydraulic winches + hydraulic power pack , 2…
-
Sold – 2,200-tonne Floating A-frame Crane Luffing Type
Built in 2014 in Korea, the floating crane barge is registered in Panama. It has a GT of 9205 Ton and NT of 2361 Ton. The max lifting capacity if 2,200 Ton with 2 JIB Luffing Type. Lift Height from deck is 87 m with a boom angle of 65 degrees.Outreach from bow is 29.3…
