-
36 ft. x 12.5 ft. Work Spud Barges (2)
2 work barges. One is 36-inches in height and the other 42-inches. Both barges are 35-ft in length and 12.5-ft in width. Both barges also have 2 spuds. Both of these barges have recently been blasted, painted, re-decked where necessary new manhole were renewed as required. Price is for each barge.Location: State of Texas, USA…
-
Sold – M33 Deck Barge With A-Frame
M33 Deck barge in good condition and ready to work. This barge is part of a package deal with the M36 deck barge linked below. 35′ x 12.6″ x 36″ A-Frame (not pictured) Package Deal; M36 deck barge with spuds M33 deck barge with A frame Location: Louisiana Our barge inventory changes weekly. If you…
-
Sold – 30′ Raked Bow Work Barge
30’x12’x3′ Work barge, built in 2022 by Barge Worx. Location: Louisiana 30x12x3 Raked Bow Barge with following features 1/4″ Plate, 2x2x1/4 framing on 24″ centers, 4 cleats, Flush water-tight manway, 2 coat exterior epoxy paint Dual engine brackets with underdeck rigging pipe and Aluminum console 8″ internal spudwells 6″ spuds 20ft long with hats and…
-
Sold – 17 m, 471 kW Transport Vessel/Landing Craft
Powered by 2 GUASCOR engines, the transport vessel/landing craft has total power of 471 kW (631 hp) at 1800 rpm. The vessel is 17 m in length and 4.2 m breadth. It was built in 1982 and has been reconditioned. The vessel is reported to has 200 hours of use. Location: Portugal General Year…
-
Not Available – 16-tonne Floating Crane and Grab Dredger
Floating Crane built in 1989 with major repair to engines in 2021. The barge was built in 1990. Registered as Germany (ZSUK)”Unionszeugnis” gültig bis 27.10.2025. The barge is 32.0 m in length, 14.30 in width and has a depth of 3.0 m. Overall height is 9.20 m.The cranes is a Weserhütte W320 Caterpillar 6TB00262 215kW…
-
Sold – 80-tonne Road Transportable Jack Up Barge
This 80-tonne Road Transportable Jack Up Barge is under currently construction (June, 2016), and will require another 3 to 4 months to complete. All of the main works are complete, just needs the jacking system installed. Located in Malaysia Principal Dimensions and Characteristics Year of Build: 2016 Certification: BV (Bureau Veritas) Hull Attestation…
-
Sold – 54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat
Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a…
-
SOLD: 130′ x 50′ x 12′ Spud Barge, not documented
The vessel is of all welded steel construction with a raked bow, square stern and cambered deck with a concrete pad down the center. There are six (6) compartments: (2 rakes and 4 main body compartments) and four (4) spud wells. All compartments sighted are separated by transverse and longitudinal watertight bulkheads. There are 3…
-
SOLD: 7905 DWT Ballastable Barge for Charter
Strengthened for Heavy Cargo. 70.3 m length x 32.16 m breadth and a depth of 7.00 m. Draft is 4.80 m. Ballast tanks have a capacity of 13.270 m3 and have 2 pumps each 1.200 m³/h / 50 Hz / 23mWS. Barge Class Society & Notation is GL100 A5 RSA (200) PONTOON. Location: North Europe…
-
Sold – 24m Komsa Classed Jack-up Barge
Barge Overview 24m Komsa Classed Jack-up Barge for sale. Located in Korean waters. Barge Characteristics Built: 2022 / Korea Class: KOMSA (Non IACS) Flag: Korea Barge Dimensions & Characteristics Length: 23.95 m Width: 20 m Depth: 2.38 m Light weight: 296.5 ton Spud: 52m × 1000mm Dia. (1 step add 60m / 2 step add…
-
Sold – Loader Barge with Barko Crane
Loader barge with 1987 Barko 160A TRK Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 2022 Suzuki 150hp In-line 4 Stroke Outboard Ballast Tanks: 2 Pontoons: with Hydraulic Spud Wells and Spuds Crane Information Model: 1987 Barko 160A TRK Crane Orange Peel Grapple Rotex Turntable Reach: 27′ Engine: GM 353 Our inventory changes weekly. If…
-
Unavailable – Jack Up Barge Platform
Vessel Info Jack-Up barge / platform built specifically for drilling. Approved by the Danish Maritime Authority in April 2022 The jack-up platform had an intermediate inspection done in March 2025, and must have a 5-year inspection in March / April 2027. This vessel is a state-of-the-art jack-up developed specifically for drilling tasks. She can also…
-
Sold – Jack Up Platform Barge
Jack up platform barge available for sale or charter. Location: Indonesia The vessel had major and extensive rebuilding under ABS class (total about 18 Mio euro budget) in 2006 and 2007 whereby all mechanical, electrical, hydraulic equipment, cables, piping, machinery and operational control systems were renewed as well as the new generators/engines and the complete…
-
Sold – 610-tonne Payload Jack-Up Barge for Charter
This 42 x 23.5 Jack-Up barge has available deck area of 800 m2 and a deck load of 10T/m2. The barge has 4 x 37.5 m spuds. Maximum elevated height is 26.6 m. The barge was built in 1999, it’s flag is St Vincent & The Grenadines. Class Society and Notation is BV I Hull…
-
Sold – 80 tonne Modular Jack Up Barge
18 m x 12 m dismountable jack up barge. Movable using 10 trucks (8 x 40-ft and 2 x 60-ft). Spuds are 18 m in length and wall thickness of 25 mm. The barge has a deck load of 15 t/m2 and a deck lifting capacity of 80 tonnes. Location: Ireland Dimensions and Characteristics …
-
Sold – 45-foot Twin Propeller Airboat w/ Knuckleboom Crane
This is a 2,400 quad-engine airboat with a 30-knot cruising speed. There is a 10,000 pound deck mounted knuckleboom crane with basket, and a 13,000 pound hydraulic bow winch. Located in the state of Texas, USA Principal Dimensions and Characteristics Length Over All: 45-feet 13.72 m Beam: 16-feet…
-
Sold – 50-tonne Modular Jack Up Barge
15 m x 12 m x 1.5 m dismountable jack up barge. Movable using 5 trucks (3 x 40-ft and 2 x 60-ft). Spuds are 20 m in length and wall thickness of 20 mm. The barge has a deck load of 15 t/m2 and a deck lifting capacity of 50 tonnes. Location: Ireland Principal…
-
SOLD: 300-tonne Floating Revolving Crane
The 300-tonnes barge has a storage area of 12m x 12m. Length of the barge is 36m, breadth is 16m and depth is 4m. The crane is an American-Hoist 300 T with a maximum lift capacity of 65 T at 13 m. Barge equipment includes 2×12 T hydraulic winches + hydraulic power pack , 2…
