Work and Crane Barges

  • Sold – 54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat

    Sold – 54-feet x 30-feet Truckable Barge with Crane and 400-hp Push Boat

    • 425,000 USD
    • 210803-BW
    • Location: New Jersey

    Barge is truckable in four pieces. 3 sections are 40-ft x 10ft each and 1 section in stern that is 14-ft x 30-ft. The stern section includes the galley and tool room. The barge has 4 studs each with a length of 45-ft. Spuds are raised and lowered using the crane. The crane is a…

  • SOLD: 130′ x 50′ x 12′ Spud Barge, not documented

    SOLD: 130′ x 50′ x 12′ Spud Barge, not documented

    • 110,000 USD
    • 200311-BD

    The vessel is of all welded steel construction with a raked bow, square stern and cambered deck with a concrete pad down the center. There are six (6) compartments: (2 rakes and 4 main body compartments) and four (4) spud wells. All compartments sighted are separated by transverse and longitudinal watertight bulkheads. There are 3…

  • Sold – Loader Barge with Barko Crane

    Sold – Loader Barge with Barko Crane

    • 110,000 USD
    • 240924-BL
    • Location: Florida

    Loader barge with 1987 Barko 160A TRK Crane. Location: Florida General Information Dimensions: 12’x31’x3′ Power: 2022 Suzuki 150hp In-line 4 Stroke Outboard Ballast Tanks: 2 Pontoons: with Hydraulic Spud Wells and Spuds Crane Information Model: 1987 Barko 160A TRK Crane Orange Peel Grapple Rotex Turntable Reach: 27′ Engine: GM 353 Our inventory changes weekly. If…

  • Sold – 45-foot Twin Propeller Airboat w/ Knuckleboom Crane

    Sold – 45-foot Twin Propeller Airboat w/ Knuckleboom Crane

    • 468,000 USD
    • 161204-VS
    • Location: Texas

    This is a 2,400 quad-engine airboat with a 30-knot cruising speed. There is a 10,000 pound deck mounted knuckleboom crane with basket, and a 13,000 pound hydraulic bow winch. Located in the state of Texas, USA           Principal Dimensions and Characteristics   Length Over All: 45-feet 13.72 m   Beam: 16-feet…

  • Sold – 28 m x 16.2 m x 3 m Heavy Spud Barge

    Sold – 28 m x 16.2 m x 3 m Heavy Spud Barge

    • 201015-BD
    • Location: Middle East

    This listing is for a 28 m x 16 m x 3 m Barge with 4-point Mooring. It was built in Lebanon in 1999 and was reconditioned there in 2019. Its’ Classification Society and Notation is IROS (International Register of Shipping). Barge is currently fitted with a 75 Ton Lima Crane and a manual grab…

  • Sold – 2,200-tonne Floating A-frame Crane Luffing Type

    Sold – 2,200-tonne Floating A-frame Crane Luffing Type

    • 20,410,000 USD
    • 220600-BL

    Built in 2014 in Korea, the floating crane barge is registered in Panama. It has a GT of 9205 Ton and NT of 2361 Ton. The max lifting capacity if 2,200 Ton with 2 JIB Luffing Type. Lift Height from deck is 87 m with a boom angle of 65 degrees.Outreach from bow is 29.3…

  • Sold – 1,300-Tonne, 150-man Jack Up Barge with DP2

    Sold – 1,300-Tonne, 150-man Jack Up Barge with DP2

    • 55,000,000 USD
    • 210913-BJ
    • Location: Persian Gulf

    The platform is defined as a self-propelled Jack-up that is designed as according to a GustoMSC type NG-2500X which mainly designated for operation in worldwide ocean environments with sea water depths up to 70 m at all specified weather and the sea conditions stated in specification at that region. The unit is intended to be…