-
Truckable Push / Tug Boat
25.6′ truckable push / tug boat made of polyethylene. No maintenance hull. Perfect boat for pushing, towing or transport. Made of rugged, durable, and indestructible HDPE. General Information Fully customizable – including engines, equipment, size, trailer, etc. Made of HDPE Built to order Very quick turn around Built to suit your needs Low Maintenance Location:…
-
Multipurpose HDPE Workboat
Looking for a low maintenance workboat? The Assault 30 is a 30 ft. custom center console made of indestructible polyethylene (HDPE). Nothing will stick to it, and it won’t crack or dent. Perfect for a variety of work tasks including emergency response, support vessel, line handling, inland dock building, and more. General Information Fully customizable…
-
New Price – 33 ft. Aluminum Flat Deck Work Boat
33 ft. aluminum work boat for sale, located in the southern United States. In good condition. Location: Florida Renovated in 2022 with new twin 250 hp Suzuki outboards (July 2022) New air conditioning New generator New paint New radio New Garmin New Blue Fin trailer Sept 2023 Large flat back deck Air conditioned cabin Our…
-
BP 35T Twin Engine Towing Tug
The hull of this towing tug is built of Ordinary Strength Steel with five water tight bulkheads. Continuous main deck from Poop deck until the accommodation. The Forecastle is raised one level. The accommodation is in the middle and below there are the cycloidal propellers. Location: Mexico Information & Dimensions Length LOA:LBP Registry:Beam Moulded…
-
Crew Boat For Sale
Located on the West Coast of the United States. Built in 1968. Location: West Coast (USA) General Information Built: 1968 / UNITED STATES OF AMERICA Hull material: Aluminum Flag: UNITED STATES OF AMERICA Class Society and Notation USCG, Coastal Trade Dauntless USCG COI inspection scheduled for 2024 Classification USCG Certified, Subchapter T Route Coastwise Unrestricted…
-
35-tonne BP Twin Cycloidal Propulsion Towing Tug
Built in 1977. The hull is built of Ordinary Strength Steel with five water tight bulkheads. Continuous main deck from Poop deck until the accommodation. The Forecastle is raised one level. The accommodation is in the middle and below there are the cycloidal propellers. Powered by a Stork Wartsila 4tew SWD 9 FHD 240 engine…
-
18-foot Deep V HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft 9-in, beam of 7-ft 8-in and a transome height of 23-in. Sides are made from 12-in Round Tube with upper (21 ¾” Total). Hull, floor and bench material thickness is ½” HDPE. Transom and side material is ¾” HDPE. Hull carries a twelve-month warranty…
-
17-foot Modified V Hull HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft, beam of 7-ft 6-in, sides 23-in and a transom height of 20-in. Hull, floor and bench material thickness is 3/8” HDPE. Floor/Front platform material is ½” HDPE. Features: Transom material is 3/4″ HDPE, rear transom wells for battery and fuel tank, front platform with…
-
23-foot Flat Bottom HDPE Work Skiff
New Construction – the HDPE skiff is a length of 23-ft, beam of 8-ft 3-in, sides 24-in and a transom height of 25-in. Hull, floor and bench material thickness is 3/8” HDPE. Transom material is ¾” HDPE. Cabin and other accessory material are ¼” HDPE. Features recessed transom w/ storage, front platform/storage compartment and rear…
-
New Construction 23′ Modified V Hull HDPE Work Skiff
New Construction – the HDPE skiff is a length of 23-ft, beam of 8-ft 4-in, sides 34-in and a transom height of 20-in. Hull, floor and bench material thickness is 1/2” HDPE. Transom and upper deck material are 3/4″ HDPE. Features include fixed rear bench w/ storage, front platform/storage compartment and transom width to receive…
-
650 hp Twin Screw Work Tug
Nearly new Main Engines: JD 6090 tier 2 with 650hp. Gears and ration: MG 512 and 3:10. The tug has 2 aft winches. It has a length of 42 feet, a beam of 14.2 feet and a depth of 5.7 feet. Fuel capacity is 500 gallons. Location: State of Oregon, USA General Built: 1953…
-
900- hp Twin Screw Truckable Tug for Charter
Only used on one project the twin screw tug is powered by 2 Two John Deere 6068AFM85 diesel engines with 2 x 300 hp. Propellers are 34”x18” x 4 blade bronze propellers and has two main steering rudders and four flanking rudders. The tug has 2 bow hand deck winches and push knees 7’-0” above…
-
NEW 76 HP, 25-foot Tug Boat/Dredge Tender w/ A-frame
Factory built in 2016 but never used. The vessel has 2 side pontoon that are bolt mounted on the side of the hull. The length of the vessel is 24-ft 10-in and width of 13-ft (including side pontoons). The XinHong / XHSJ20-374A-00 winch is hydraulic and has a capacity of 3000 lbs. It has a…
-
900 hp Twin Screw Pushboat (Towboat)
Powered by 2 x 12V71 Detroit engines with total of 900 hp. Engines have approx. 5000 work hours. Towboat has a length of 56-ft, width of 22-ft and depth of 8-ft. Fuel capacity is 9000 gallons. Boat is fully functional – engines ran smoother and quietly, tug neat and clean. Complete support equipment is included.…
-
1,700 hp Twin Screw Offshore Supply Vessel (OSV)
Twin Diesel Caterpillar c32 engines with 1,700 hp with a deck area of 340 m2 (34.6 x 9.81 m), GT of 624 and NT of 187. Cruising speed is 9 knots and towing speed of 4-6 knots with a bollard pull of 17 tons.. The vessel has a Link Belt Modela HSP-8040 Hydraulic Telescope Crane…
-
41-foot Aluminum High Speed Work Boat
US Coast Guard UTB Vessel built in 1975, the Huron Explorer is 41-ft in length, has a beam of 14-ft and draft of 4-ft. The boat is powered by 2 Cummins engines with 320hp. The boat has an aluminum hull with new bottom paint. SOLD Location: state of Florida, USA General Built Year: 1975 Hull:…
-
2,100 hp Single Screw Ocean Going Tug
Built in 1987 in Italy, this tug is recently out of drydock July 2020 with an IACS class (RINA). It is powered by a Wartsila F38A 1 x 1550KW – 840 RPM engine with controllable pitch propeller in Kort steering nozzle. Bollard Pull is 39 tons. Maximum speed is 13 knots and cruising speed is…
-
1870 kW (2508 hp) Twin Screw ASD Harbor Tug
Class Society and Notation of Croatian Register of Shipping 90A2 4 (coastal service) Tug. The tug is 32.11 m in length and has a beam of 8.8 m. It is powered by 2×Niigata (6L25CXE) engines. Main propulsions is ASD. Bollard pull ahead is 40 MT and astern is 35 MT. Flag: Liberia Location: Black Sea General…
