-
550 hp Multi-Purpose Work Boat For Sale and Charter
This 550 hp Multi-Purpose Work Boat was built in 2005 and it’s Classification Society and Notation is INSB (International Naval Surveys Bureau), Sailing area: Full European up to 20 miles from a safe haven. Flag: Cyprus Located in Northern Europe Principal Dimensions and Characteristics Year Built: 2005 Make/Model: Multicat Classification Society/Notation:…
-
880 hp Twin Screw Near Shore Tug and GP Work Boat
This listing is for a 880 hp Twin Screw Near Shore Tug and GP Work Boat that was built in the United Kingdom in 2004. She is a twinscrew motor tug, certificated under the MCA Workboat Code of Practice for operation up to 60 miles offshore. She is available for towage and survey works throughout…
-
1000 hp, 14 m, 12-PAX 28-knot Crew Boat
Built in 2012 in GBI, the crew boat has a class U.K. MCA COP 12+2 / 60 MILES. The boat is powered by 2 Cummins QSC 8.5 with combined power of 1000 hp. Propulsion is 2 x FPP and max speed is 28 knots. Length overall is 14.9 m, beam is 5.0 m and draft…
-
35-tonne BP Twin Cycloidal Propulsion Towing Tug
Built in 1977. The hull is built of Ordinary Strength Steel with five water tight bulkheads. Continuous main deck from Poop deck until the accommodation. The Forecastle is raised one level. The accommodation is in the middle and below there are the cycloidal propellers. Powered by a Stork Wartsila 4tew SWD 9 FHD 240 engine…
-
18-foot Deep V HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft 9-in, beam of 7-ft 8-in and a transome height of 23-in. Sides are made from 12-in Round Tube with upper (21 ¾” Total). Hull, floor and bench material thickness is ½” HDPE. Transom and side material is ¾” HDPE. Hull carries a twelve-month warranty…
-
17-foot Modified V Hull HDPE Work Skiff
New Construction – the HDPE skiff is a length of 17-ft, beam of 7-ft 6-in, sides 23-in and a transom height of 20-in. Hull, floor and bench material thickness is 3/8” HDPE. Floor/Front platform material is ½” HDPE. Features: Transom material is 3/4″ HDPE, rear transom wells for battery and fuel tank, front platform with…
-
23-foot Flat Bottom HDPE Work Skiff
New Construction – the HDPE skiff is a length of 23-ft, beam of 8-ft 3-in, sides 24-in and a transom height of 25-in. Hull, floor and bench material thickness is 3/8” HDPE. Transom material is ¾” HDPE. Cabin and other accessory material are ¼” HDPE. Features recessed transom w/ storage, front platform/storage compartment and rear…
-
New Construction 23′ Modified V Hull HDPE Work Skiff
New Construction – the HDPE skiff is a length of 23-ft, beam of 8-ft 4-in, sides 34-in and a transom height of 20-in. Hull, floor and bench material thickness is 1/2” HDPE. Transom and upper deck material are 3/4″ HDPE. Features include fixed rear bench w/ storage, front platform/storage compartment and transom width to receive…
-
650 hp Twin Screw Work Tug
Nearly new Main Engines: JD 6090 tier 2 with 650hp. Gears and ration: MG 512 and 3:10. The tug has 2 aft winches. It has a length of 42 feet, a beam of 14.2 feet and a depth of 5.7 feet. Fuel capacity is 500 gallons. Location: State of Oregon, USA General Built: 1953…
-
900- hp Twin Screw Truckable Tug for Charter
Only used on one project the twin screw tug is powered by 2 Two John Deere 6068AFM85 diesel engines with 2 x 300 hp. Propellers are 34”x18” x 4 blade bronze propellers and has two main steering rudders and four flanking rudders. The tug has 2 bow hand deck winches and push knees 7’-0” above…
-
NEW 76 HP, 25-foot Tug Boat/Dredge Tender w/ A-frame
Factory built in 2016 but never used. The vessel has 2 side pontoon that are bolt mounted on the side of the hull. The length of the vessel is 24-ft 10-in and width of 13-ft (including side pontoons). The XinHong / XHSJ20-374A-00 winch is hydraulic and has a capacity of 3000 lbs. It has a…
-
1000 hp Twin Screw Anchor Boat
Built in 1973 in Japan. The anchor boat is powered by 2 Yanmar 6M-UT (4-valve) engines with 500 hp each and has 2 set x Screw Propeller. The length of the boat is 22.59 m (74.11-ft), breadth is 8.0 m (26.25-ft and has a depth of 2.5 m (8.2-ft). Location: West Mediterranean Sea …
-
800 hp Single Screw General Purpose Towing Tug
Single screw tug is powered by a NIIGATA 6MG 20 CX 800hp engine. The tug has a length of 23.90 m, a breadth of 7.0 m and depth of 3.0 m. The tug was built in 1985 in Japan. Location: West Mediterranean Sea General Built Year / Place: 1985 / Japan Dimensions and Characteristics…
-
900 hp Twin Screw Pushboat (Towboat)
Powered by 2 x 12V71 Detroit engines with total of 900 hp. Engines have approx. 5000 work hours. Towboat has a length of 56-ft, width of 22-ft and depth of 8-ft. Fuel capacity is 9000 gallons. Boat is fully functional – engines ran smoother and quietly, tug neat and clean. Complete support equipment is included.…
-
1,700 hp Twin Screw Offshore Supply Vessel (OSV)
Twin Diesel Caterpillar c32 engines with 1,700 hp with a deck area of 340 m2 (34.6 x 9.81 m), GT of 624 and NT of 187. Cruising speed is 9 knots and towing speed of 4-6 knots with a bollard pull of 17 tons.. The vessel has a Link Belt Modela HSP-8040 Hydraulic Telescope Crane…
-
5,460 hp, 210-foot DP2 Multipurpose Supply Vessel
Multipurpose Supply Vessel satisfies the general requirements of the deep water offshore industry. KONGSBERG SIMRAD dynamic positioning SDP 21 system allowing: Automatic tracking, dynamic positioning, automatic speed control, submarine (ROV) auto-tracking. The vessel has a deadweight of 2370 mt. Accommodations for 30 persons and Mess / Dry rooms, Laundry, Galley, Stores, Office, Fully Air- conditioned…
-
41-foot Aluminum High Speed Work Boat
US Coast Guard UTB Vessel built in 1975, the Huron Explorer is 41-ft in length, has a beam of 14-ft and draft of 4-ft. The boat is powered by 2 Cummins engines with 320hp. The boat has an aluminum hull with new bottom paint. SOLD Location: state of Florida, USA General Built Year: 1975 Hull:…
-
2564 HP Twin Screw Inland Tow Boat and Barge
This listing includes a tow boat and 2 barges. See below purchase options. The Tow Boat type is a pusher. It was built in 1969 in Germany. It is powered by 2 MAK 6 M20 (built 1998) with total power of 1912 kw. Both barges were built in 1977 in France. Both have a length…
