-
10-inch Booster Pump with Automation Package
The 10-inch booster pump is designed with centrifugal singles suction volute having a 12 inch diameter suction and is arranged for 10-inch inside diameter suction pipe. The 10-inch pump is mounted on a steel base. It is powered by a John Deere 6090 diesel engine rated at 325bhp @2200RPM.. The dredge pump is a GIW…
-
Excavator Pump Attachment 6-inch Eddy Pumps
Non-clog design dredge/booster pump for high solids industrial pumping applications. Min flow of 450 gal/min and a max flow of 2000 gal/min. Has a capacity of 150-200 yd3/hr. Only used on one job. Very low hours and in excellent condition. Location: State of California, USA Principal Dimensions and Characteristics Length: 113-in 2.87 m Height: 37-in…
-
10-inch Submersible Pump with Agitators Toyo DP-150B
Pump comes outfitted with a jet ring, water supply pump, 2 saddles and a control box, 50 ft of electrical cord and 250 ft of 10 inch fixed HDPE pipe. Location: State of Oregon, USA Dimensions and Characteristics Model: DP-150B-3D1 Outlet: 254 mm 10-in Capacity: 720 m3/h 942 yd3/h…
-
Metso 8″ x 6″ Slurry Pump w/ 50 hp electric drive
Metso 8×6 slurry pump with drive and 50 hp motor. Location: State of Nebraska, USA
-
14-inch Cutterhead Module with Cutterhead and 65 hp drive
Dredge works 65 HP cutter drive with pump and end ladder. The cutterhead has a 14-inch suction. Location: State of Nebraska, USA
-
18-inch Floating Booster Pump
This 18-inch (457 mm) Booster Pump is mounted on floating pontoons. The pontoons measure 10 m x 6 m. The booster has been used on one job and run around 1500 hours. It is in good working condition and well maintained. The slurry capacity is 3500 m3/hr and has a discharge distance of 2000 m.…
-
18-inch Floating Booster Pump
This 18-inch (457 mm) Booster Pump is mounted on floating pontoons. The pontoons measure 10 m x 6 m. The booster has been used on one job and run around 1500 hours. It is in good working condition and well maintained. The slurry capacity is 3500 m3/hr and has a discharge distance of 2000 m.…
-
12-inch Booster Pump
This 12-inch (305) mm, 715 hp Booster Pump was built in 2002. The pump is skid mounted and has 1,500 LOW hours with oil samples. The booster is diesel powered and V-belt driven. Location: State of Illinois, USA Principal Dimensions and Characteristics Year Built: 2002 Pump: Model/Make: Metso/L40 Discharge Diameter: 305 mm 12 inches Suction…
-
Damen 250 Submersible Pump
This Damen DOP250 Submersible Pump is a compact pump directly powered by a hydraulic motor, mounted in a protective casing. The robust casing can be fitted out with a large array of suction heads, which results in a versatile dredging tool fit for a broad range of tasks. Pumps are designed to be user friendly…
-
10-inch Ellicott 370 Pump w/ Reducer Complete
This 10-inch Ellicott 370 Pump was built in 2009. It is a complete pump and transmission (bearing housing and shaft). The the impeller and shell have about 60% life remaining. The dry end has been refurbished, and is in good condition. The transmission has new bearings, seals and a cooler. Location: Georgia Principal Dimensions and…
-
16-inch Maddox Booster Pump w/ Detroit 16V92TI Prime Mover
This is a 16 x 16-inch Maddox Booster Pump with a 16V92TI Detroit Diesel engine, driven through a Falk Gear Box. Booster is in good condition. Location: state of Florida, USA Principal Dimensions and Characteristics Type: Booster Pump Make/Model: Maddox / 16X16X36 Discharge Diameter: 406.4 mm 16 inches Suction Diameter:…
-
27 x 24 x 68-inch Booster Pump with twin Cat 399 power
This is a 27 x 24 x 68-inch Booster Pump with twin Cat 399 engines that are rebuilt, one only has 191 hours. The Ellicott pump made by Mobile Pulley is a complete new pump and has never been used. It is skid mounted and the skid breaks in half so the booster can be…
-
6 x 8-inch Booster Pump
This is a 6 x 8-inch Booster Pump with a Detroit Inline 6 diesel engine. Located in the state of Louisiana, USA Principal Dimensions and Characteristics Type: Booster Pump Make/Model: Furukawa Slurry / LFK004 pump Discharge Diameter: 152.4 mm 6 inches Suction Diameter: 203.2 mm 8 inches Weight: 10,000…
-
Dredge Cutter Head w/ 71-inch (1,803 mm) ID Black Ring
Cutter head includes 8 complete extra sets of replaceable cutter edges. The cutter head edges have casting #A6337 and #A6338. New York, USA All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied.…
-
Sold: Metso J36 12″ x 12″ Pump
Metso J36 12″ x 12″ Pump Location: State of Nebraska, USA
-
SOLD: 14-inch GIW Pump Impeller
Brand new GIW Impeller 14×36 IN 3M 2C4.5 for a dredge pump. The rotation direction is clockwise from the shaft side. The impeller weights 526.17 kg (1160 lbs). Location: Netherlands
-
SOLD – 10 x 8-inch Booster Pump w/Mack Engine
This listing is for a Lightning XL pump with a Mack 6 cylinder engine. The impeller is worn out. Pump recently painted. Location: state of Texas, USA Principal Dimensions and Characteristics Pump Make/Model: Lightning XL Discharge Diameter: 203.2 mm 8 inches Suction Diameter: 254 mm 10 inches Engine Make / Model: Mack 6 cylinder All…
-
SOLD: 160 mm Dragflow HY85 160 HC Submersible Pump (2 Available)
Built in 2018 at Dragflow in Italy. Hydraulic motor. Pump has been used for only 300 hours. Suitable for bentonite water, slurry water, sand-water, salt sand water, etc Can be purchased en-bloc with 200824-PF and 200823-PP Location: Netherlands General Information Built: 2018 / Italy Working Hours: 300 hr Principal Dimensions and Characteristics Weight: 885 kgs…
