Dredging Equipment – Dredge Brokers





Filters
Search

Category

  • Sold: 10-inch Booster Pump with Automation Package

    Sold: 10-inch Booster Pump with Automation Package

    • 189,000 USD
    • 220220-CP
    • Location: California

    The 10-inch booster pump is designed with centrifugal singles suction volute having a 12 inch diameter suction and is arranged for 10-inch inside diameter suction pipe. The 10-inch pump is mounted on a steel base. It is powered by a John Deere 6090 diesel engine rated at 325bhp @2200RPM.. The dredge pump is a GIW…

  • Sold: Excavator Pump Attachment 6-inch Eddy Pumps

    Sold: Excavator Pump Attachment 6-inch Eddy Pumps

    • 96,200 USD
    • 220219-CP
    • Location: North America

    Non-clog design dredge/booster pump for high solids industrial pumping applications. Min flow of 450 gal/min and a max flow of 2000 gal/min. Has a capacity of 150-200 yd3/hr. Only used on one job. Very low hours and in excellent condition. Location: State of California, USA Dimensions and Characteristics Length: 113-in 2.87 m Height: 37-in 0.94…

  • Sold – EPIC Plus Severe Duty Motor with Berkeley Pump

    Sold – EPIC Plus Severe Duty Motor with Berkeley Pump

    • 6,500 USD
    • 250710-CP
    • Location: Montana

    Pump Info Worldwide Electric Corp – Premium Efficiency EPIC Plus Severe Duty Motor with Berkeley Pump. Motor Characteristics: Model: EP50-18-326T Horsepower (HP): 50 TEFC (Totally Enclosed Fan Cooled) IP: 55 Amps: 116.6/58.3 134/67 Voltage: 230/460V Frequency: 60 Hz RPM: 1780 Phase: 3 Serial Number: 0716336026 Pump Characteristics: Berkeley Pump Model: B6JRM (B6J-CW) H 870 B.M.…

  • Sold: Excavator Pump Attachment 10-inch Eddy Pumps

    Sold: Excavator Pump Attachment 10-inch Eddy Pumps

    • 163,000 USD
    • 220218-CP

    Non-clog design for high solids industrial pumping applications. Min flow of 1200 gal/min and a max flow of 5000 gal/min. Has a capacity of 300-350 yd3/hr. Only used on one job. Very low hours and in excellent condition. The attachment is currently set up for a Komatsu 400 excavator.  Requires a separate Hydraulic Power Unit…

  • Sold – 3300 PSI 25 GPM Hydraulic Power Unit (HPU)

    Sold – 3300 PSI 25 GPM Hydraulic Power Unit (HPU)

    • 83,250 USD
    • 220614-CP

    This HPU is driven by a Tier 4 Certified JCB Engine. Operating pressure 1200-3300 PSI with a hydraulic flow of 0-52 GPM. Hydraulic tank and diesel tank are both 120 gallons. 4″ x 10″ box tube skid rails & 10″ forklift boots. Fully boxed frame tubing for added protection Location: State of South Carolina, USA…

  • SOLD: 6-inch Dredge Pump, hydraulic driven.

    SOLD: 6-inch Dredge Pump, hydraulic driven.

    • 22,000 USD
    • 220619-CP

    Innovative Material Systems CDH100C dredge pump, Hours: 1,132 on meter, Serial: 1024, Cummins 4BT, Fuel type: Diesel, Inlet/discharge diameter: 6″, (2) pumps, Hydraulic driven, (7) suction pipes, (1) 10′ L, (3) 8′ L, (3) 3′ L, Trailer, 16′ L x 84″ W, Suspension: Spring, Axles: Tandem, Tire size: ST205/75R15, good condition. Location: State of Kansas,…

  • SOLD: 12-inch Booster Pump

    SOLD: 12-inch Booster Pump

    • 323,000 USD
    • 190902-CP

    This 12-inch (305) mm, 715 hp Booster Pump was built in 2002. The pump is skid mounted and has 1,500 LOW hours with oil samples. The booster is diesel powered and V-belt driven. Location: State of Illinois, USA Principal Dimensions and Characteristics Year Built: 2002 Pump: Model/Make: Metso/L40 Discharge Diameter: 305 mm 12 inches Suction…

  • SOLD: 14-inch Cutterhead Module with Cutterhead and 65 hp drive

    SOLD: 14-inch Cutterhead Module with Cutterhead and 65 hp drive

    • 56,000 USD
    • 211007-CH
    • Location: Nebraska

    Dredge works 65 HP cutter drive with pump and end ladder. The cutterhead has a 14-inch suction. Location: State of Nebraska, USA

  • Sold – 27 x 24 x 68-inch Booster Pump with twin Cat 399 power

    Sold – 27 x 24 x 68-inch Booster Pump with twin Cat 399 power

    • 885,000 USD
    • 151052-CP

    This is a 27 x 24 x 68-inch Booster Pump with twin Cat 399 engines that are rebuilt, one only has 191 hours. The Ellicott pump made by Mobile Pulley is a complete new pump and has never been used. It is skid mounted and the skid breaks in half so the booster can be…

  • Sold – 12-inch Damien Submersible Pump and Power Unit

    Sold – 12-inch Damien Submersible Pump and Power Unit

    • 218,000 USD
    • 220811-DU

    Damien DOP PUMP / 3025 with Power Pack. This submersible pump was built in 2005 and can be coupled to an excavator, crane or A Frame. It can be used as a deep dredging system and can also be coupled to a booster for greater discharge distance. Pontoons included. Location: Mexico Pump Dimensions and Characteristics…

  • Not Available: 18/16 Warman Dredge Pump

    Not Available: 18/16 Warman Dredge Pump

    • 72,500 EUR
    • 230602-CP

    Rebuilt in 2022 including new housing and new back plate. Impeller 85%. Location: Netherlands Our inventory of dredge pumps changes often. If you don’t see what you’re looking for please give us a call at +1 (225) 301-2873 or email us to discuss what you’re looking for.

  • SOLD: 500 hp Dredge Cutterhead Module For 22-inch Dredge

    SOLD: 500 hp Dredge Cutterhead Module For 22-inch Dredge

    • 34,000 USD
    • 221100-CP

    48-inch Cutter Basket with 500hp hydraulic gearbox. Assembly came off a 22 inch dredge. Location: State of Florida, USA Dimensions and Characteristics   Cutter Diameter:  1219 mm 48-inch   Hydraulic Gearbox:  373 kW 500 hp Our inventory changes weekly. If you don’t see what you’re looking for please give us a call at +1 (225)…

  • Sold- 16-inch Maddox Booster Pump

    Sold- 16-inch Maddox Booster Pump

    • 89,000 USD
    • 220804-CP

    16” Maddox booster pump powered by Detroit diesel 12v92T with a twin disc PTO driving a Falk gear box . Pump is a Maddox 16x16x43. Booster is being sold as is where is. Location: State of Florida, USA Our inventory changes weekly. If you don’t see what you’re looking for please give us a call…

  • Sold: Twin Disk MG 518 Marine Gear 2.47/1 reduction

    Sold: Twin Disk MG 518 Marine Gear 2.47/1 reduction

    • 28,000 USD
    • 211006-CH
    • Location: North America

    Twin Disc MG 518-1; 2.47 to 1 reduction; sn 3 x 3918; rated 750 hp. Has been inspected and is in very good condition. Location: State of Nebraska, USA

  • Not Available: 18-inch Floating Booster Pump

    Not Available: 18-inch Floating Booster Pump

    • 775,000 USD
    • 200113-CP

    This 18-inch (457 mm) Booster Pump is mounted on floating pontoons. The pontoons measure 10 m x 6 m. The booster has been used on one job and run around 1500 hours. It is in good working condition and well maintained. The slurry capacity is 3500 m3/hr and has a discharge distance of 2000 m.…

  • Sold – 300 mm (12-inch) Submersible Pump, Damen DOP 3025

    Sold – 300 mm (12-inch) Submersible Pump, Damen DOP 3025

    • 143,000 USD
    • 190802-CP
    • Location: North America

    This Damen 3025 is a hydraulically driven, submersible dredge pump with wear resistant pump parts. Maximum working depth for the standard executed DOP pump is -40 meters. A protective casing, made of steel, is surrounding the dredge pump and drive. The hydraulic motors and gearbox are suitable for continuous operation under and above water level.…

  • Sold – 10-inch Submersible Pump with Agitators Toyo DP-150B

    Sold – 10-inch Submersible Pump with Agitators Toyo DP-150B

    • 164,000 USD
    • 220213-CP
    • Location: Oregon

    Pump comes outfitted with a jet ring, water supply pump, 2 saddles and a control box, 50 ft of electrical cord and 250 ft of 10 inch fixed HDPE pipe. Location: State of Oregon, USA Dimensions and Characteristics     Model: DP-150B-3D1     Outlet: 254 mm 10-in     Capacity: 720 m3/h 942 yd3/h…

  • Sold – 12-inch Submersible Pump with Agitators Dragflow HY 300B

    Sold – 12-inch Submersible Pump with Agitators Dragflow HY 300B

    • 110,000 USD
    • 220212-CP
    • Location: Oregon

    Comes outfitted with a hydraulically driven mechanical agitators, 250 ft of 10 inch fixed HDPE pipe, includes hydraulic power unit and associated controls. Requires misc. riggings and shackles to operate. Location: State of Oregon, USA           Dimensions and Characteristics     Model: HY 300B (Serial # 2663)     Weight: 3542.6…