-
2018 Ellicott Dragon Series 370-30 10″ Cutter Suction Dredge
This 10″ Ellicott cutter suction dredge was completely refurbished in 2018 and has a 30′ cutting depth. Location: Georgia Principal Dimensions and Characteristics Year Refurbished: 2018 Hull Length: 36′ Hull Width: 12′ Dry Weight: 56,000 lbs. Deep: 4′ Draft: 2.7′ Fuel Capacity: 800 Gallons Genset: Kubota 6kw, 8hp Dredge Capacities Cutting Depth: 30′ Dredge Pump…
-
New – 18″ x 18″ Custom Shark Dredge
This 18″ x 18″ CUSTOM SHARK DREDGE MODEL SH-10300-56D-SP has a minimum digging depth of 5′ and maximum of 56′. Overall length (with ladder) of 112′-4″ and a width (with side tanks) of 29′- 11″. Principal Dimensions and Characteristics Overall length (with ladder) 112′-4″ (34m) Overall width (with side tanks) 29′ – 11″ (9.1 m)…
-
Updated – 406 mm (16-inch) Non Propelled Cutter Suction Dredger (CSD)
Built in 1998 in France is a non-propelled cutter suction dredger. The dredge pump is a Caterpillar 3508 with 630kw @1800rpm. It has a max drilling depth of 12m and a maximum flow rate for water of 2880m3/hr. The cutter diameter is 1350mm. The deck crane has a capacity of 1.35T and a length of…
-
New – 10″ X 10″ X 30″ Dredge with Metso 10″ X 10″ pump
Dredger located in Arkansas just coming out of operation available now. Powered by Cummins KT1150 Diesel engine hydraulic power pack driven by a Cummins 855 diesel engine to operate deck winches and cutter head 40′ ladder with 36″ cutter head spud holders (No Spuds) enclosed cab to include gauge package and vacuum gauge (+/-) 400′…
-
New – 1984 Ellicott 370 Dragon Cutter Suction Dredger
Built in 1984. Rebuilt pump with low hours. Everything works. Cab and controls need to be rebuilt and modernized. Used for dredging marinas, lakes and rivers, channels, canals, sand mining, more. Location: Northwest, USA Principal Dimensions and Characteristics Discharge Size: 12″ x 10″ All details on these pages are given in good faith and are…
-
Updated Price – 16-inch Cutter Suction Dredge (CSD) IHC Beaver 40
IHC Beaver 40 was built in 2018. Can be dismantled for easy transport. The dredging depth is 8m. The dredge pump is a IHC 900-175-350, single-walled and engine type is Caterpillar C18 TA Acert. Engine power is 483 kW @ 1800 rpm. Cutter type is a IHC Lancelot 955-50 with a diameter of 955 mm.…
-
New – Sinaloa Cutter Suction Dredge
Built in 1980 in the USA. Location: Nicaragua General Information Built By: AMMCO (USA) Year Built: 1980 Flag: Mexico Classification: No Dimensions and Characteristics Length Over All: 35.71 m Beam: 18 m Depth Molded: 1.80 m Dredge Max Dredging Depth: 13.35 m Min Dredging Depth: 2…
-
18-inch Cutter Suction Dredger
Includes 18-inch Cutter suction Dredger, workboat, house boat, pipes and floaters. Running hours is approximately 18,000 hours. The dredger was built in 2017. It has a length overall of 22.78 m and a breadth of 8.25 m. Draft loaded is 0.84 m. Dry weight is 60 TON. Max. dredging depth is 15 m. Production capacity…
-
850 mm (34-inch) Cutter Suction Dredger
Built in 2011 in China, the dredger has a Classification of CCS Unrestricted Navigation. Total installed power is 13,671 KW. Inboard pumps (2) are IHC HRMD221-36-85 with shaft power of 3626 KW. Dredging depth is 6-28 m and suction and discharge diameters are both 850 mm. Discharge distance is 5-10 km. Cutter is a Bakker…
-
16-inch Cutter Suction Dredge (CSD), AMMCO PD-16-14
Stationary suction dredger with cutter, driven by stilts and banding winches for uniform sweeping. Equipped with cutter scale for effective dredging. The dredging pump has 16″ suction and 14″ discharge, driven by a gearbox with the right ratio by an 700 HP engine of power, 500 HP for the pump and the rest for the…
-
14 x 12-inch AMMCO Dredge
This 14 x 12-inch AMMCO Dredge was built in Nashville, the hull was rebuilt/refurbished in 2014. The vessel is a stock design hydraulic dredge built for commercial use at mine sites and protected waters. The dredge is in full operating condition, and is currently disassembled in a boatyard. Location: State of New Jersey, USA Principal…
-
750 mm (30-inch) Cutter Suction Dredger (CSD) IHC Beaver 4600
The dredger is a dismountable cutter suction dredger and non-propelled and equipped with an anchor boom installation. The hull consists of six pontoons designed for simple and quick assembly and dismantling. The cutter is driven by slow-running hydraulic motors. The two spuds are each operated by means of a hydraulic ram. All winches are driven…
-
16-inch Cutter Suction Dredger NEW construction
The 16-inch CSD is reliable, fuel efficient and has low maintenance costs. This robust and highly productive dredger is equipped with state-of-the art technology. Max dredging depth is 10 m. It has a 16/12HG-II-(7)-850R-230 pump that combines high efficiency and a large ball passage to provide a high level of availability. The pump has a…
-
18-inch (450 mm) Cutter Suction Dredger (CSD)
The IHC Beaver 1200 C Cutter Suction Dredger was built in 2004. Prime mover is a Caterpillar 3508 (Top End 2020 ) with 620 kW. The engine has 37,000 working hours. The dredge pump is a 2016 IHC-1100-200-400. Aux power is a Caterpillar 3306 overhauled in 2019. It has 4,000 hrs. Max dredging depth is…
-
Ellicott 1270 – 18-inch Cutter Suction Dredge (CSD)
The Ellicott Series 1270 built in 2018 is a non-self-propelled, transportable, hydraulic pipeline, cutterhead dredge. Its prime mover consists of a diesel driven centrifugal dredge pump and a diesel driven hydraulic system which powers the cutter, ladder lifting cylinders, and swing and spud winches. The dredge is fully operational. Service records available. 2 cutter heads…
-
12-inch Cutter Suction Dredge
This 12-inch (305 mm) Cutter Suction Dredge built by Twinkle in 2002. The dredge is transportable with side pontoons removable. Twinkle Co rotary cutter baskets are designed and built for sand and gravel dredge mining. The cylindrical pontoons are inherently strong, which requires less steel per cubic foot of displacement. Location: State of Illinois, USA…
-
20 inch Cutter Suction Dredger, IHC Beaver 5014C
This 20-inch Cutter Suction Dredger, IHC Beaver 5014C was built in the Netherlands 2004. The IHC Beaver is well known for its robust construction, reliable operation and excellent performance. This Dredge is in complete operating condition. Flag: Commonwealth of Dominica Location: Latvia Principal Dimensions and Characteristics Year Built: 2004 Length Over All : 35.1 m…
-
8-inch Rebuilt Cutter Suction Dredger (CSD)
This 8-inch Rebuilt Cutter Suction Dredger (CSD) was completely overhauled in 2014. The dredger is compact, easy to transport and capable of a wide range of activities like maintenance dredging, sand winning and gravel winning. By means of the extensive renovation a KISS (keep it simple sir) type modern dredger is created by the former…
