-
Sold – 6-inch Horizontal Cutter Dredger, LWT 3010 “Pit Hog”
This dredge is in fully working order, and runs and pumps great, with a 4-inch Cornell Pump with a 6-inch Discharge. The Air Conditioning Unit has been recently replaced. The 1994 Featherlite Flatbed Trailer pictured is included. Slurry Production is approximately 1,200 GPM (4,542 L/hr.) depending on job conditions. Location: State of Minnesota, USA …
-
Not Available: 22-inch/560 mm Self Propelled Submersible Pump Sand Dredger
Built in 1989 in Japan. The dredger has 22″(550A) KSP-550SSP/2000rpm pump with a capacity of 4,500 m3/hr. The jetting pump capacity is 270 m3/hr @ 140m (Taiko Kikai 200/150). The jetting pump engine is a Isuzu 154 PS/2,000 rpm. Dredging depth is a min. of less than 3m and max of 50m. The dredge is…
-
Not Available: 6500 m3 Non-Propelled Cutter Suction Dredge
This listing is for a 1000mm (40-inch) Non-Propelled Cutter Suction Dredger with a discharge distance of 6 km. The dredge was built in 2019 in China and has a classification of CCS Unrestricted Navigation. Flag: China Location: China Dimensions and Characteristics Year Built: 2019 / China Classification CCS Unrestricted Navigation Length Overall:…
-
Not Available: 18-inch Submersible Pump Sand Dredger
Dredger has a Toyo-Denki DP600-12W/450KW/3,300V/60hz Sand pump with an 450mm diameter and a capacity of 3,500 m3/hr. Jetting Pump is a Ebara 300/200 with a capacity of 600 m3/hr. Maximum dredging debts is 15m and can be extended to 30m. The dredger has a length of 39.9m, breadth of 12.0m, depth of 2.4m. GT is…
-
Not Available: IMS Model 4010-LP – 10-inch Horizontal Dredge
This IMS Model 4010-LP – 10-inch Horizontal Dredge was built in October, 1996. The Dredge was recently rebuilt in 2015 by CDW and it has new pontoons designed by CDW to fit existing footprint/frame. The entire hydraulic system was redone as well and the dredge was also painted. All functions operate. Engine assembly is original…
-
Not Available: 12-inch Cutter Suction Dredger
This 12-inch Cutter Suction Dredger was built in 2008 and is in perfect working order. the price includes 100 m of floating (rubber) pipe. Located in Lithuania Principal Dimensions and Characteristics Year Built: 2008 Length Over All: 18.00 m 59 feet Beam: 5.00 m 16 feet Depth: 3.50 m 11…
-
Sold – 10-inch Horizontal Cutter Dredge IMS 7012 HP “Versi-Dredge”
The machine was delivered to the seller new in 2007 and has 1,860 hours on the clock. It is in good working order. Located in the West of Ireland Principal Dimensions and Characteristics Length Over All: 15.7 m 51.5 feet Width: 3.6 m 11.8 feet Height: 3.2 m 10.5 feet …
-
Sold: Custom Self Propelled 8″ Horizontal Cutter Dredge with Gooseneck Trailer
Custom self-propelled 8″ Horizontal Cutter Dredger with Gooseneck trailer. Location: Georgia Specs Custom built, 8″ self-propelled dredge 7 ft cutter head on 21 ft elevator (part that moves while cutting) 2022 twin 90hp Yamaha 8″ discharge with a 6″ step down Enclosed cab 30′ Anderson Manufacturing Gooseneck Trailer VIN: 4YNBN2923LC090251 All details on these pages…
-
SOLD: Dino 6 Horizontal Cutter Dredge
2012 Dino 6 Hydraulic Horizontal Cutter Dredge, built in 2012 with only 120 hours. Ideal for sediment removal from small bodies of water like retention ponds, canals, marinas, sediment lagoons, and small lakes. This is a very portable dredge and has a customized tilting trailer to fit the dredge and discharge pipe. Located in the…
-
SOLD: DSC Barracuda Swinging Ladder Dredge
2015 model DSC Barracuda Dredge. This swing ladder dredge is old, not 100% of the build date (maybe 1996) but the engine was overhauled in 2015. It has minor modifications and is fully mechanical (no electric over hydraulic components) Max dig depth: 17′ Suction Pipe: 14″ Discharge Pipe: 12″ Dredge has 2 different sets of…
-
SOLD: Ellicott 370 Dragon Hydraulic Cutter Suction Dredge
2002 model. Built longer than full length side tanks to extend the hull to 48′ LOA and 21′ WOA, they connect to the existing hull with Ellicott OEM hook and socket connections at the bottom similar to the 670 model and bolted connections above deck. The perimeter of the deck is fitted with 1.5″ speed…
-
SOLD: 1998 VMI 815 8″ Auger Dredge
Warman Ladder Mounted 8″ Pump 350 HP Cummins M11 Engine with 3,500 hours – recently rebuilt $150,000 invested into the dredge including Rebuilt engine All new hydraulics All new hoses All new wiring All new dredge steel and flex hose piping Brand new cutterhead, teeth, shroud and protective cage Rebuilt dredge pump with new impeller…
-
SOLD: 6-inch Horizontal Cutter Dredger “Dino 6”
This 6-inch Horizontal Cutter Dredger was built in 2013, and has 3600 total runtime hours. It has been modified with longer and wider pontoons, a cab, and a transom which can hold 2 outboard motors. It has a new cutter head, boom, and cable system that was used on 1 small job after it was…
